@geezanansa You seem to be saying I need 4 partitions just for Ubuntu? I myself don't need /home on a separate partition. That was for someone else....
@Seth No not telling you what you need as making partitions for any Ubuntu directory is optional. Sorry to jump in on a conversation that you had earlier regarding partitioning. In that conversation you were asking if you should.. "So shrink from Windows, and then create Ubuntu's from the LiveCD?"
So I was poking around on the Nexus7 via ssh and there are loads of i2c endpoints in /dev. That explains why half the peripherals aren't working I suppose...moving on.
In 13.04 workspaces are disabled by default. To enable them, open "Appearance" from the dash. It looks like this:
Switch to the "Behavior" tab and check "Enable workspaces".
After that the normal shortcuts will work:
Super+S for the workspace overview and Ctrl+Alt+Arrow Keys to sw...
And was wondering if I covered everything you expected.
Because I didn't find a whole lot that was different in 13.04
I Have this error while I am compile the kernel in order to add a new system call it !
Since I have downloaded the linux-3.6.2.tar.bz2 kernel and my distributions kernel after run (uname -r) command was 3.5.0-7-generic
(
drivers/infiniband/hw/mlx4/qp.c: In function ‘mlx4_ib_post_send’:
drivers...
Previously i was using the windows 7. When i try to replace the windows to ubuntu i lost all of my other drive files. Is there any way to recover these files. I have my project files and some important files in one of my folder. Anyone pls help...
Ok Is there any chance to recover a single file....
I have two identical monitors connected on my pc but only the one connected via HDMI is "fully" recognized inside nvidia-settings.
I am trying to manually "decrypt" the xorg.conf file to make the necessary changes.
There is "Sony" monitor which is disabled (that's correct) and I have two identic...
I made a typo and run my shell script recursively.
https://gist.github.com/umpirsky/5415963
This caused system to become unresponsive and all I can do is hard restart.
Tried same on MacOS and it was able to detect this problem and terminated the scripot with an error.
I think operating system...
@fossfreedom how the translations on launchpad are approved? I did some translations on your project CoverArt Browser, and I'd like to know when they will be approved.
I can approve myself ... but if you are looking for a confirmation ... need to email the launchpad.net/~lp-l10n-pt group ... or ask a fellow speaker such as @brunopereira to help.
@TheLordofTime Personally i would not resize a partition when booted to it. Diskpart is a Windows Disk Management tool which can be run from recovery options at boot time i.e. before system is booted. So no i would not either.:p
The source video can be encoded into virtually any format. Let's say it sits in ~/Videos/Test.webm.
The end result is simply to stream the video, with sound, directly through a 'fake' video device, so it can be picked up by Google+ Hangouts.
The video was created with ffmpeg, and reading around...
@fossfreedom I thought "loopback" meant there had to be an existing /dev/video* source to use? I don't have an existing device, and want to 'fake' the video device by pumping the raw video somewhere
I'll have a look into it, but I have a feeling AVLD has been attempted before.
@fossfreedom Ah, it looks like that might be the answer... managed to get a video loopback device recognised, but now I've got to figure out how to stream the video to it... any idea?
@fossfreedom I just checked my translations and there was only one string that differed from pt_BR to pt_PT and I just modified it so it's all good now.
hi folks, I have seen askubuntu.com/questions/248682/… which is a question about how to run a game on ubuntu. Can I ask questions on how to optimize primusrun for steam?
@Private That question is for a issue while running and that is totally on topic, I would also see no issues with you asking if there are any optimizations / recommendations to run Steam with primusrun
Quick question: Does anyone think this should be on the n7 ubuntu wiki? docs.google.com/document/d/… seems legit and it might give driver modders a jumping off point...
There is no guarantee all your files will be intact. There's no way to give such a guarantee effectively.
You can upgrade-in-place (command line: sudo do-release-upgrade -d, i think) once Raring is released, but there's still the risk of data loss, either because the upgrade fails and your syst...
@BrunoPereira launchpad doesnt allow that - you update the translations, then install (manually) the translation on your PC with the software. Thus this current translation is for v0.8 - where the software will be made available in a PPA next week. Until then, you install manually from the github release-0.8 branch.
Is there anything new in 13.04? (Downloaded the daily testing image but I notice no differences since 12.10. Except the ugly icon. But nothing else... o.O)
@TheLordofTime : Well, as in 12.10 had TOYS (IF YOU KNOW WHAT I MEAN) when you searched. (Got fixed later, though.) Or had a "snappier" Unity. More Unity options. Uhm... "Files". Things like that...
I am trying to get an audio setup that looks like:
INPUTS:
1 stream from mpg123 (CLI MP3 player)
1 Microphone Input
OUTPUT:
1 stream going to Jitsi (Jabber w/ voice) to be broadcast.
1 connection to my headphones (need not be of my mic)
And the other set:
INPUT: 1 stream from Jitsi
OUTPUT: 1 s...
Not sure if I'm allowed to ask questions like but hopefully someone can help me out. Essentially I have a Ubuntu laptop and a board running Debian and I have installed the same kernel module and a utility for managing it on each using aptitude.
Unfortunately the versions of the kernel modules an...
I am looking for a Jingle client for the command line.
Currently, I use Jitsi, but my dreams of not needing the GUI for more than just web-browsing are not realized due to my reliance on this program.
Does anybody know of a CLI client that supports:
VoIP
Communication with people on XMPP acco...
It seems that the more new users ask questions on SO, the more "bad quality" questions are asked as well. While I welcome new users, I think their questions should have a minimum quality standard as well:
Showing the problem they are facing
Explaining what they have tried so far to solve it (re...
I am trying to find all files modified before march 6 in a directory with thousands of files.
I executed the following commands in the PWD where I want to find files.
find -mtime +47 > /root/file_005.log
or
find -mtime +48 > /root/file_006.log
or
find -mtime +49 > /root/file_007.log
The...
@Shiki netbeans and eclipse both work with openjdk in my experience (minor library issues from time to time where you install a couple of blobs from the plug-in repos)
I am trying to figure out why my process doesn't work if started via a script, but works fine if started by hand.
Here's the details:
script is a resque worker start script. The script location is /etc/monit/conf.d/start_resque.sh. Permissions are 755 and owned by ubuntu:ubuntu
When I run the ...
Anyone know what it takes to get a free ebook pushed in to the kindle ebook store or archive.org? I so think this: lwn.net/Kernel/LDD3 should be available to kindle users (and by proxy people that use the kindle web app)