« first day (4749 days earlier)      last day (567 days later) » 

00:00
@XanderHenderson forget what I said about "they", that was untrue
@Jakobian In English, the second person pronoun is "you". We no longer have a distinction between singular and plural in the second person (historically, I believe that "thou" is the singular, and "you" the plural; in modern English, some dialects have an explicitly plural form, such as "y'all" or "youse", but these are pretty regional).
In Russian, the second person is either ты (singular or familiar) or вы (plural or formal / polite).
"You'uns", too.
And my favorite second person pronoun: "all y'all", which is distinct from "y'all".
that's the same as for Poland but like I said, the second word isn't used to refer to someone formally anymore, and that usage is archaic and replaced by "Pan/Pani"
@Semiclassical Well, I was thinking it should be in a plane parallel to the projection plane. But perhaps that was hasty.
i have to say, checking these is getting me mixed up
@Jakobian I believe, sometimes in movies a Slavic foreigner (probably Russian soldier) will call Poles pretentious because of this, because for them it sounds like we refer to each other as some kind of royalty
00:13
If you slice by a plane not parallel to the plane you're projecting to, it's not clear to me why you get the same bounding curves.
01:35
@TedShifrin i fear i'm just repeating myself, but here's how i'd summarize what i now know. let $F(x,y,z)=2z^2-1-x y-\sqrt{1-x^2}\sqrt{1-y^2}$. then $F(x,y,z)=0$ for $z\geq 0$ defines a surface. this contains the space curve $g(t):=(4t^3-3t,t,t)$ for $1/2<t<1$, which obviously lies within the $y=z$ plane. the nontrivial claim is that $2\partial_y F=\partial_z F$ when evaluated at any point on the curve
so along the curve there's one linear relation between the coordinates, and another between the derivatives w/r/t to these coordinates
Just think about the kernel of the derivative of the projection map on the surface. Of course, projection is a linear map, so it is its own derivative,
Wow, the rendering in this room is really made for apple devices.
Android renders the above right into the comment's side bar.
Nice contrast, actually :-)
01:58
@TedShifrin sure, but i don't think you'd generally have a linear relation between the derivatives. (if only b/c i tried a different example and found no such relation)
 
4 hours later…
05:42
My professors say regarding only CW complexes makes algebraic topology too trivial.
That's why I'm writing about point-set topology despite having learnt algebraic topology.
05:57
@Semiclassical I don’t understand this at all.
@DannyuNDos This makes no sense. Point-set topology is of marginal interest and a subject of relatively little research in the modern day.
i mean, take a generic slice of a convex set, and look at the surface normals to the original set along the boundary of the sliced set. there's no reason that these normals have to lie in a common plane
e.g., slice a cone horizontally. the surface normals along the resulting circle will point down and radially out
So what? We were discussing a special circumstance.
sure. i was trying to say what was special about it
(and i just realized my cone example is a bad one, since all these normals have the same z-coordinate. maybe for a general conic section it'd be different, but a circle is a dumb choice)
06:20
I think CW complex alone can construct some higher concepts in AT. Caring only something in any field is rejected these days.
any it's not too trivial. any manifold admits a CW decomposition. So he's claiming that studying manifolds using AT is too trivial.
because understanding manifolds using only CW complexes in AT is too hard, people developed and created different methods.
found an (admittedly sorta silly looking) way to reformulate my problem. Suppose $\cos(2\gamma)<\cos(\alpha-\beta)$ for $(\alpha,\beta,\gamma)\in[0,\pi]^3$. Then there exists $\delta\in[0,\pi]$ such that $\cos \delta = 1/3(2\cos\gamma+\cos\beta)$ (since the RHS is definitely in $[-1,1]$. Must $\cos(2\delta)<\cos(\alpha-\delta)$?
the angle $\delta$ definitely has to lie between $\gamma$ and $\beta$, so this is effectively asking whether the inequality remains true if we replace $\gamma,\beta$ by this "average" of them
as far as i can tell it is true, but i can find numerical counterexamples if i replace $\cos \delta$ with any other such averaging (e.g., weights 1/4 and 3/4)
 
1 hour later…
07:44
@TedShifrin It's just my master’s dissertation. Tbh, I can't find a single new result, so I'm just writing solutions to Chapter 7 of Munkres.
well, many of the master's dissertations are survey papers of their research interests unless he/she is very lucky or very talented to produce actually new theorems.
 
2 hours later…
09:48
@TedShifrin :(
Jam
Jam
10:32
WHy the change of variable in integrals the new region is not a region where the first region is transformed but a region which is transformed to the starting one? Like a pullback region why is this like going backwards?
Jam
Jam
10:45
its kinda counterintuitive. its more like a change of variable of (u,v) to (x,y) and not for (x,y) to (u,v)
or is it because the easy transformations of shapes for example rectangle to a disk and not a disk to a rectangle so instead of working how to make the disk to a rectangle we ask what region is transflrmed to a disk .
Jam
Jam
11:16
neverm ind i figured it out. when setting x=u+v, y=u+3v or whatever is a transformation of the u,v plane to the u+v,u+3v plane. It is different from setting x=2x+y which is a transformation of the x,y plane.
 
2 hours later…
Jam
Jam
12:47
Prove there exists m such that $ a<\frac{2+m}{2+n}<b $ for large enough n.
13:24
I was trying to build a simple example to show that even if we find a $\delta$ dependent on $x,x_0$ in the definition of continuity for a function $f$, this does not imply that $f$ is not uniformly continuous. I thought about this: let $f(x)=x$, this function is clearly uniformly continuous on $\mathbb{R}$ (it is enough to choose $\delta=\epsilon$).
But for arbitrary $\epsilon>0$, setting $\delta^*=\epsilon\left(1-\frac{1}{|x|+|x_0|+2}\right)$ if $|x-x_0|<\delta^*$ then $|x-x_0|<\epsilon\left(1-\frac{1}{|x_0|+2}\right) \le \epsilon/2 <\epsilon$; hence, showing a $\delta$ dependent on $x_0$ is not enough to conclude that a function is not uniformly continuous. Is this reasoning correct?
Some typos in the latter message, sorry: I meant "$|x-x_0|<\epsilon\left(1-\frac{1}{|x|+|x_0|+2}\right)<\epsilon$" and "showing a $\delta$ dependent on $x,x_0$".
14:06
In showing that the identity function is continuous $x_0$, you should not need to choose a $\delta$ which is dependent on $x_0$. You can choose such a $\delta$, but why?
For any $\varepsilon > 0$, choose $\delta < \varepsilon$. If $|x-x_0| < \delta$, then $|f(x) - f(x_0)| = |x - x_0| < \delta < \varepsilon$. Done.
Don't over complicate it.
I'm confused about what you are trying to show (and the repeated negations in your first sentence are giving me a headache). :/
14:21
@Sonozaki why even try to build your own example when textbook writers do that for you?
Instead, trying doing the examples on your own before reading the solutions that are given following the examples.
15:15
$$\zeta(s)=\frac{1}{\Gamma}\mathcal{ M} \bigg [\sum_{\alpha \in \Bbb N} \Phi_\alpha(t)\bigg] (s) $$
$\Phi_{\alpha}(t)$ is a 1-parameter family of Riemannian metrics. Sum over the parameter restricted to the spectrum of a certain ring, take the Mellin transform and you obtain a zeta function
actually the family of metrics is carefully crafted so that pre-multiplying by a Gamma factor $1/\Gamma$ gives $\zeta(s)$
Q: Let $\Phi_{\alpha}(t)$ satisfy a geometric flow. I wonder if that allows you to say something more about $\zeta(s)$?
15:39
for example exploit some symmetry and get a functional equation
 
2 hours later…
17:41
@Sonozaki Just to emphasize. To show that a function is not uniformly continuous you must show that it is impossible to find a $\delta$ that is independent of $x_0$.
17:55
Hi :) How do you get the normal subgroup generated by a set, in GAP?
Assume the group is finite for my purposes.
I'm writing a programme in GAP for my research, mainly so that I can gather data to inform conjectures.
Surely someone must've asked this before . . .
Many of us have no idea what GAP is. Algebra software is pretty recondite.
18:20
Fair enough, @TedShifrin. I've asked on GAP Forum. I'm surprised it's not an FAQ.
@TedShifrin It's even less popular than general topology! :P
Suppose that $f(x_1,x_2,...,x_m, y_1,y_2,...,y_n)= \sum x_i^2 -\sum y_i^2$. Then 1) when is $f^{-1}(c)$ an n+m-1 surface? 2) when is $f^{-1}(c) $connected?
Definition: For an open set U of R^{n+1}, given a smooth map f: U-->R, for a c in image f, the set f^{-1}(c):=M is said to be regular if for every p in M, gradient f at p is non zero. In this case, M is said to be an n space.
So for 1): Fix a c in R and denote f^{-1}(c) by M. For M to be regular, for every p in M, gradient of f at p must be non zero. It is observed that it is possible iff norm of p is non zero. In other words, M should not contain 0. That is, f(0)= 0 \ne c. It follows that for all non zero c, M is regular hence an m+n-1 space.
18:36
It's "NormalClosure(G, S);" - I forgot that synonym.
@AlessandroCodenotti That might be, but I wouldn’t know. :)
I'm just joking, I do agree general topology is not very popular nowadays
@Koro Start with small values of $m,n$.
I wouldn't really call myself a topologist either, even though I spent a lot of time recently going through some hard topology from the 50s/60s (Bing & Co.)
People forget that topology has moved quite a bit away from both general and algebraic. Lots of Seiberg-Witten invariants and symplectic tooology.
18:46
All the people who do algebraic topology here are doing $\infty$-categories and other scary things 24/7
Of course, basic point-set and a year or more of alg top are tools in all sorts of math.
I did that. So for m=n=1, we get connectedness if c=0 else we are looking at a hyperbola x_1^2-y_1^2=c which is not connected. For m=2, n=1: if c=0, then we get $x_1^2+x_2^2=y_1^2$, which is connected, if c\ne 0 then $x_1^2+x_2^2=y_1^2+c$, not sure what to conclude from this without looking at graph.
For higher dimensions, even a graph won't help.
$c=0$ gives a cone, so always connected. You can do your example without a graph, Think basic inequalities to see disconnectedness in some cases.
you mean in higher dimensions too?
the set of all (bold(x), bold (y)) in R^{m+n} such f(bold(x), bold(y))>c is open and so is for f(bold(x), bold(y))<c and these are disjoint. But I don't see how this helps if that's what you meant by inequalities.
Use the fact that (sums of) squares are nonnegative.
18:55
ohh so effectively I'm looking at $(x_1,...,x_m)$ such that $\sum x_i^2\ge c$?
(because $\sum x_i^2 =\sum y_i^2 +c \ge c$ since $\sum y_i^2\ge 0$.)
$f^{-1}(c)= \{(\bar x, \bar y): f(\bar x, \bar y)=c\}=\bigcup_{r\ge 0}\{(\bar x, \bar y): \|x\|^2=c+r\}= \{(\bar x, \bar y): \|x\|^2\ge c\}$
More to the point, suppose $c<0$; what does this tell you about $y$?
yeah, I'm thinking how to go from here.
Thanks
Anyhow, do some concrete stuff in small numbers before you feel like you should do the general argument.
For m=n=1, we get disconnectedness.
@TedShifrin sure
19:29
one problem though: according to the above set of equalities, I'm getting $f^{-1}(0)=\{(\bar x, \bar y): \|x\|^2\ge 0\}= R^{m+n}$, which can not be true as this would imply that $f\equiv 0$.
why this paradox?
I want to verify the uniform convergence of $$\sum_{k=1}^\infty (1-x)x^{k^2}, \quad 0\leq x\leq 1.$$ In a previous exercise, I computed $$\sup_{0\leq x\leq 1} (1-x)x^c,\quad c\geq 1$$ which I found was equal to $\frac{c^c}{(c+1)^{c+1}}$. Now I'm a little unsure how to apply this to the series above. I assume we want to use the Weierstrass M-test and so bound the absolute value of the terms.
However, when I let $c=k^2$, I get a very weird-looking fraction that I cannot determine the convergence of to use the test. Appreciate any help or hints.
$$\sum_{k=1}^\infty \frac{(k^2)^{k^2}}{(k^2+1)^{k^2+1}} \leq \sum_{k=1}^\infty \frac{1}{k^2+1} < \infty $$
@sunny here you go
@Jakobian I need to process this, but thank you!
I hope this isn't bad that I'm giving you the answer straight-out
no, not at all, I appreciate your help a lot!
19:57
ok, I see how we have $(1-x)x^{k^2}\leq \frac{(k^2)^{k^2}}{(k^2+1)^{k^2+1}}$, however, why is $\frac{(k^2)^{k^2}}{(k^2+1)^{k^2+1}}\leq \frac{1}{k^2+1}$?
take one factor of $k^1+1$ from denominator
got it!
20:41
Hi.
21:02
hello
Just want to double check this. I want to show that $$s(x)=\sum_{k=1}^\infty \frac{\arctan kx}{1+k^2x^2},$$ is continuous for $x>0$. I have shown previously that it is uniformly convergent in the interval $x\geq c$ where $c>0$. Does the result now simply follow from the uniform limit theorem?
21:17
@sunny yes
easy peasy then, thanks for confirming
21:47
@TedShifrin More or less than these new words you expose us to, to enlarge our vernacular?...................😊
Is it reasonable to expect that $\theta_3 \circ f$ satisfies a functional equation, given that $\theta_3$ is the Jacobi theta function?
$\theta(x)=\frac{1}{\sqrt{x}}\theta(1/x)$
no there probably not reasonable
22:04
I wonder why so few people chat here. There can't be so few people who are interested in mathematics. Perhaps the stackexchange chat is too unkown. :)
22:20
When proving limits, we can assume $\epsilon$ "small" without losing generality; that is, there is a logical equivalence between two definitions of limit, the first with "for each $\epsilon>0$" and the second with "for each $0<\epsilon \le \epsilon_0$". Is this assumption still possibile for the characterization of the supremum?
That is, in "$\sup A$ is the supremum of $A$ (bounded above and nonempty) if and only if for each $\epsilon>0$ there exists $a_\epsilon \in A$ such that $a_\epsilon>\sup A-\epsilon$" is the latter proposition equivalent to "for each $0<\epsilon \le \epsilon_0$ there exists $a_\epsilon \in A$ such that $a_\epsilon>\sup A-\epsilon$"?
I think it is true: the right implication is obvious (since it holds for each $\epsilon>0$ with $a_\epsilon \in A$, it holds for $0<\epsilon \le \epsilon_0$ with the same $a_\epsilon \in A$).
We must prove that the left implication holds only for $\epsilon>\epsilon_0$, since for $0<\epsilon \le \epsilon_0$ is true by hypothesis. Let $\epsilon>0$ be arbitrary. By hypothesis, there exists $a_{\epsilon_0} \in A$ such that $a_{\epsilon_0}>\sup A-\epsilon_0$; being $\epsilon>\epsilon_0$, we have $-\epsilon_0>-\epsilon$ and so $\sup A-\epsilon_0>\sup A-\epsilon$. That is, there exists $a_{\epsilon_0}\in A$ such that $a_{\epsilon_0}>\sup A-\epsilon$. Is this correct?
i didn't read the proof, but yes, the same kind of thing can be done for the supremum
and if that's what you're doing there then you got it
Requires mathjax.
@leslietownes Thanks for this confirmation leslie)
@algbr That's probably a part of it
another thing is that people might not want to chat about mathematics
Like Professor Wiles did for 7 years :P
Truly old school.
22:46
some topics are poison

when you talk about prime twins or collatz people will downvote you. anything less then a formal proof is a downvote. So a downvote.

such a shame
Stay in the mainstream or be prepared to work alone.
23:05
@robjohn I have a related question to one of your answers. Is the function $$f(x)=\sum_{k=1}^\infty\left(\frac1k-\frac1{k+x}\right)$$ continuous on $[0,\infty)$? How do we verify this? My suspicion is it isn't, since I can't get an upper bound on the terms and apply the Weierstrass M-test.
On the other hand, neither can I get a lower bound for $\lVert f-f_n\rVert=\sup_{x\in [0,\infty)} \left|\sum_{k=n+1}^\infty \left(\frac1k-\frac1{k+x}\right)\right|$ to show it isn't uniformly convergent...
the only troublesome point seems to be $0$
@sunny $f(x) = x\cdot\sum_{k=1}^\infty \frac{1}{k(k+x)}$ where $\frac{1}{k(k+x)}\leq \frac{1}{k^2}$ so that the series $\sum \frac{1}{k(k+x)}$converges uniformly
conclusion: f is continuous
@mick I try to disprove periodicity of the Jacobi-Perron algorithm. Is it a downvote? ;)
23:23
@Jakobian I kind of buy it, however, can you move the $x$ outside of the summation before knowing it is uniformly convergent? After all, $\sum c a_n=c\sum a_n$ holds only if $\sum a_n$ converges (we don't know yet if it does, or?).
@sunny everything here obviously converges
pointwise
and the reason can be traced down to $\frac{1}{k(k+x)}\leq \frac{1}{k^2}$
@sunny both converge or both diverge
@sunny this function is meromorphic, with poles at the negative integers.
@robjohn alright, so $\sum c a_n=c\sum a_n$ holds even if $\sum a_n $ diverges. You learn something new every day, thanks :)
Just look at the sequence of partial sums.
yeah
fun! :)

« first day (4749 days earlier)      last day (567 days later) »