@Criggie It looks like you're using the SOCVR Request Generator. That's great. It will be a bit more effective use the !!/report request type, which will directly generate the !!/report command for SmokeDetector. It may also be desirable to set the options a bit differently. What the options are set to by default will depend on when you installed the userscript, as the defaults were dialed in over a couple of different revisions of the userscript.
If you're interested, there's also the SIM userscript (GitHub) (install). It adds a "smokey" button to posts which opens a popup showing if the post has been reported, the general feedback, if it was autoflagged, any manual flaggers, and if the post hasn't been reported, then there's a !!/report button, which posts a !!/report command here in Charcoal HQ.
@SmokeDetector It's somehow bitcoin related. Maybe a wallet? I am not very familiar, to be quite honest. It was almost immediately edited into a non-answer afterwards and it promises to answer if OP comments. Might be a form of fishing for a "donation".
@cocomac Yes and no. You don't have to have set things up such that you will actually autoflag, but you do have to have enabled MS to raise flags for you. The specific criteria are: if user_signed_in? && current_user.write_authenticated && current_user.flags_enabled && [email protected]_fp && [email protected]? && Time.now - (@post.created_at || 1.day.ago) <= 1.hour && current_user.has_role?(:reviewer)
You should be able to do the following to enable manual flagging, but not autoflagging:
In addition, to enable manual flagging through the userscripts, the checkbox that says "Allow metasmoke to raise flags for my account" on this page also needs to be checked. If you have no entries in the "ID Site Count Flags Used Today" list at the bottom of that page, then autoflagging will still not be enabled, but manual flagging through the userscripts will be enabled.
[ SmokeDetector | MS ] Pattern-matching website in body, potentially bad ip for hostname in body, potentially bad keyword in body (97): How to calculate force? by Sherry on engineering.SE
