I want to filter Telegram Messenger to monitor the network activities (logging) from any platform. I'm wondering if there is any signature I can look into to detect the traffic, maybe a list of server IP's and TCP/UDP ports for the telegram service or any other identifier that I can use as a star...
@TheXed It could save them from a real bad guy. But it might not be legal without asking them first. My beliefs and that of the law often differ though. Although I don't agree with all of the law, I try not to break it. I like my cookie access. :P
How I can replace a single white space for underscore just between 2 strings like the example below, using sed:
xxx ccc vvv bbb 333 444 555
xxx(1 space)ccc(1 space)vvv(1 space)bbb(7 spaces)333(2 spaces)444(2 spaces)555
output
xxx_ccc_vvv_bbb 333 444 555
Output: https://pastebin.com/EX1ThxRY
Here is my server config: https://pastebin.com/NEqxV9uM
Here is my client config: https://pastebin.com/Knih723t
Not really sure why this is happening, please help. I know for sure that my firewall is good.
sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration
...worked for me! But I don't know why unless order matters.
However, even though a monitor, device and screen is laid out for devices 0, 1 and 2 within xorg.conf it only shows XScreens 0 and 1 within the Nvidia control ...
You know Jorge Castro has posted two 500 point bounties which I both "won" but the answers were never accepted so I only got 250 points each. With the extra 500 lost to Ubuntu pool of lost bounties I could have had 10K and mod tools today :(
@KazWolfe Both Zenity and YAD have progress bar support. My bash application is using both of them already for dialog boxes and what not... I was just curious if one was better than the other at progress bars.
How I can replace a single white space for underscore just between 2 strings like the example below, using sed:
xxx ccc vvv bbb 333 444 555
xxx(1 space)ccc(1 space)vvv(1 space)bbb(7 spaces)333(2 spaces)444(2 spaces)555
output
xxx_ccc_vvv_bbb 333 444 555
Output: https://pastebin.com/EX1ThxRY
Here is my server config: https://pastebin.com/NEqxV9uM
Here is my client config: https://pastebin.com/Knih723t
Not really sure why this is happening, please help. I know for sure that my firewall is good.
sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration
...worked for me! But I don't know why unless order matters.
However, even though a monitor, device and screen is laid out for devices 0, 1 and 2 within xorg.conf it only shows XScreens 0 and 1 within the Nvidia control ...
