« first day (2472 days earlier)      last day (960 days later) » 

Sparky256
Sparky256
21:26
@Zeta.Investigator, @laptop, @Kortuk, @w5vo, @Clabacchio, @DaveTweed, or @NickAlexeev Let me get things straight for some bone-heads out there. The issue was NOT that Andyaka talked the OP into un-checking my answer hours later, it was that he fed the OP a line of drivel, seen in their comments, until the OP left the site in a rage, and now no longer trust us for answers. The OP did NOT check Andyaka's answer either.
The point is that arguing with the OP as to who has the best answer is NOT good. We look like the Keystone cops. You have heard of badgering the witness, well this is badgering the OP. I should make this an admin issue.
Nick Alexeev
Nick Alexeev
22:20
@Sparky256 Please post the link to the tread which you are referring to.
Sparky256
Sparky256
22:39
2
A: Snubber on the line or just the inductor

Sparky256When you switch off a high value inductor, it dumps a reverse charge back into the circuit. The best place for a snubber diode is at the coil/inductor, however it still allows about -1 volts to come back to the source. You can insert a 10 ohm resistor in series at point 'C' to help trap the back...


« first day (2472 days earlier)      last day (960 days later) »