« first day (3066 days earlier)      last day (1867 days later) » 

Sunnyskyguy EE75
Sunnyskyguy EE75
4:38 PM
 
W5VO
W5VO
@SunnyskyguyEE75 If you put just the link by itself, the picture will show up in chat
 
Sunnyskyguy EE75
Sunnyskyguy EE75
 
W5VO
W5VO
(without the text, like "I thought I did")
 
Sunnyskyguy EE75
Sunnyskyguy EE75
aha "upload Web"
 
W5VO
W5VO
ah, lol
 
Sunnyskyguy EE75
Sunnyskyguy EE75
4:46 PM
I wonder if this was the last known photo of these guys before 1 too many beers
 
W5VO
W5VO
Definitely seen that picture before, I think the nationality changes each time it's posted.
 
JRE
JRE
It is in Germany. The style of the powerstrip is typical here, and if you find one of the higher resolution versions of the picture you can see that they are drinking beer from German breweries.
 
Unknown123
Unknown123
https://electronics.stackexchange.com/questions/300150/antistatic-bag-inside-plastic-bag

If otherwise, I put the plastic bag inside antistatic bag is it fine?

I want to put components into separate plastic bags inside one single antistatic bag, is it going to be alright?
 
W5VO
W5VO
5:07 PM
Maybe it'll be fine, but there is no longer ESD protection, and the bags you use may cause ESD issues themselves.
 
 
1 hour later…
Unknown123
Unknown123
6:08 PM
you're right I haven't think of that. The problem is that in my place the esd zip bag costs almost 15 times than normal plastic zip bag at roughly the same size
 
W5VO
W5VO
6:19 PM
You might be ok with dissipative bags inside a shielded bag, but they're not going to be as cheap as bags can be
 
 
1 hour later…
Sunnyskyguy EE75
Sunnyskyguy EE75
7:36 PM
If you want to cut down to exact size, you can save $ with a hot iron over paper insulation and a fast stroke with NO fumes. ( warning toxic, headaches etc) this can make a humidity tight seal.
All you need is a 5mm seal around the edges, then stick on a label.
 

« first day (3066 days earlier)      last day (1867 days later) »