« first day (2511 days earlier)      last day (2512 days later) » 

Bob
12:07 AM
morning
 
12:45 AM
Who was talking about old school Thinkpads the other day?
I got a bunch of T20s, T30s, T40s, T50s.
 
1:21 AM
> Accessing memory that's connected to a different chip will incur somewhat higher latency than accessing memory that's directly connected, but it comes at no bandwidth penalty.
Well, well. This just proves that Threadripper will need to be treated as two NUMA nodes for optimal performance.
If EPYC (a four-die MCM) has this sort of cross-die latency, then Threadripper (two-die MCM) will also have this problem.
> With the quad-die design, a single EPYC processor might essentially have four zones for NUMA to occur, based on communication paths.
 
Bob
1:36 AM
✅🐎🔋🖇️
3
 
that's an odd looking staple
 
@jokerdino nope
what a rude community
I can't come up with a good pun
 
Bob
2:39 AM
> Valid until Mon, 12 Sep 2016 16:35:14 UTC (expired 9 months and 8 days ago) EXPIRED
whoops
> This server supports only SSL 3 as its best protocol. Grade set to F.
whoops
 
Bob
lol my cipher preferred list has RC4 first
I might be operating the most insecure SSL config in existence here o.O
 
2:54 AM
brb I need to unrack a bunch of servers...
 
@Bob WTF
rofl
My blog domain only has my Firefox Sync server on it. Nonetheless, it is still properly maintained as a secure, SSL-protected site.
 
wtf
like
at least use cloudflare if you don't know what you're doing
 
Still getting A+ on my blog domain.
 
Bob
@bwDraco Nah, not WTF. Well, not really.
This is just the server to my proxytunnel :P
@Avery I know exactly what I'm doing :P
 
3:09 AM
30 mins ago, by Bob
> Valid until Mon, 12 Sep 2016 16:35:14 UTC (expired 9 months and 8 days ago) EXPIRED
29 mins ago, by Bob
> This server supports only SSL 3 as its best protocol. Grade set to F.
 
Bob
proxytunnel only supports SSLv3. Well, the binaries. The source has had a few TLS pull requests within the last year.
 
oh
 
Bob
That ip:port hosts ... a SSH server.
 
what is a proxytunner?
 
Bob
Sooooooo. Yea. Anyone who eavesdrops on this connection gets to see ... a SSH stream :D
I think I prioritised RC4 to minimise the double-encryption penalty.
@Avery Makes SSH look like regular HTTPS
Though I suppose I should upgrade to stunnel now... hm.
 
3:11 AM
@Bob probably.
or just put it behind cloudflare
dunno how it'd react to proxytunnel though
I'm tempted to try
 
Bob
@Avery Nah. I don't think cloudflare does forward proxies.
Needs to support CONNECT.
@Avery For reference of knowing what I'm doing: ssllabs.com/ssltest/…
(ignore the "HTTP request to this server failed", it works fine in a real browser)
It should be A+, because I do have HSTS, but it can't complete a HTTP req :P
Hm. Now I'm curious why it's redirecting.
:38261581 Hm?
 
3:30 AM
> This server supports insecure cipher suites (see below for details). Grade set to F.
23 mins ago, by Avery
https://www.ssllabs.com/ssltest/analyze.html?d=corporbank.icbc.com.cn
Inexcusable for an online banking application.
 
4:26 AM
0
Q: How do I disable Windows-F

zalgo semanaI want this hotkey free for Everything, after I have updated Windows, it has taken over Win+F with Windows Feedback. I want it back. Somehow I have disabled Win+R messing with regedit commands from Google. I have run Uninstall Feedback.cmd tool, but it did not work. Pretty funny seeing Microso...

^ question was asked, by a different profile, but the original question was closed
Can't seem to find it. But it's the same question
Deleted by author, wasn't locked, found it by massaging the review queue
 
4:43 AM
20 days until Namecheap enable OTP 2FA!
https://blog.namecheap.com/authy-based-2-factor-authentication-is-coming/
> As CEO of Namecheap, I give you my commitment that we will deliver true 2FA within the next 60 days.
 
Good morning!
 
@MichaelFrank no u2f no joy
or yubico otp
 
5:06 AM
Still a regularly-stocked item sold directly by Newegg.
Long live the dot-matrix printer!
These days, dot-matrix printers are pretty much limited to industrial applications that need a very high level of ruggedness. These printers are utterly reliable.
It's a tiny niche, but one that's probably not disappearing anytime soon.
 
user226528
5:24 AM
My first printer was a color dot-matrix printer. I used to draw in Paintbrush (Windows 3.1) and print it. Man, those drawings were ugly. And my parents somehow never regretted paying for that printer.
 
5:47 AM
@Burgi can you send the link again
 
6:03 AM
poyo
 
@bwDraco or when you need carbon paper
My casino job used a ton of em.
@Avery u2f is less universal than I hoped :(
 
6:21 AM
Morning all
back at work
Money for new job is all good
Hours should be fine
\o/
 
\o/
....
"I need you to copy over data for 4 pcs by the end of the day" "Sure... where are they? I don't know"
._.
 
:D
ip's? hostnames? anything?
XD
 
er... they are from the baking school
 
thing is "end of day" means"I need it by a reasonable time"
not "pass me 4 pcs 5 minutes before I finish work"
 
6:28 AM
:D
 
2 hours sounds fine. 1 hour sounds tight.
 
/me sleepy
 
@djsmiley2k you're getting a new job?
 
Bob
6:44 AM
my life
Find SSL Labs bug => try to test/debug => find Firefox bug too => fml
 
@Rahul2001 same place, new role.
 
Bob
more generally, find bug => try to debug => find bug in debugger
I must be doing something wrong :P
 
lol
No, everything is buggy
 
I heard you liked bugs so there
I heard you liked bugs so there's bugs in your bugs
hm.what a mess.
 
7:05 AM
@Bob That actually sounds very familiar
 
also my boss moved back to the old office for some odd reason so he stole his chair back :(
 
@OliverSalzburg it also regularly defeats me doing awesome things
that rabbit hole is far too deep.
 
It usually ends with me searching for bugs in our code formatter plugin for our IDE or something similarly productive until I snap out of it and just do it in Excel
 
@JourneymanGeek :(
@JourneymanGeek Also.... sounds like he's now.... excess to requirements?
 
> just do it in Excel
@djsmiley2k eh, he seems to be ordering in replacement hardware for our old XP stuff and mostly acting as a buffer from upper management
I can live with that.
also the more people stay out of my way, the happier I am, as long as I'm almost in the loop
 
7:11 AM
[-_-]'
huh, is rahul.tech down for anyone?
 
@Rahul2001 Works here
 
Bob
@Rahul2001 works here
 
er. I literally get a blank page
 
@Bob @OliverSalzburg Thanks
@JourneymanGeek :/
My internet connection is crappy, so I can't tell... It isn't loading for me
 
But they can't always be trusted
 
7:14 AM
"Good morning. I see the assassins have failed". Is it meme?
 
@JourneymanGeek =)
 
@Boris_yo everything is a meme...
 
Sounds like things maybe improving
 
@Boris_yo No. It's original
LOL
 
@OliverSalzburg Is it from a video game?
 
7:16 AM
@OliverSalzburg That image gives me a 404
 
@Rahul2001 Me too. Thumbnail works though
The whole internet is falling apart
 
@OliverSalzburg yep
@OliverSalzburg seems so
 
Now it's coming up. Weird
 
@OliverSalzburg whoa
what is going on?
 
Someone unplugged a thing that said "Do not unplug" but the sticker fell off
 
7:20 AM
@OliverSalzburg :/ what exploded as a result?
 
@OliverSalzburg I was going to link isup.me x)
 
What is going on
Everyone except me can access my own website
 
@OliverSalzburg the good ol' rogue raspberry pi in a black box with a warning sign and "security device; do NOT unplug."
 
Other domains on the same server work 0_0
 
hosts?
 
7:22 AM
Nope, it was working a few minutes ago
Okay, it worked 0_0
 
and. I got the PCs. from a domain
no password either
I HOPE the bloody things are not encrypted
 
how we bench PCs here: download and open a 100Mb excel file.
 
and... I'm also copying over someome's music collection
this person has TERRIBLE taste in music
 
@Bob :D
@JourneymanGeek Spice it up a little
Replace all songs with Look at my Horse
 
7:36 AM
RICK ROLL LIKE DUH
I'll set up a batch script for you if you wish, which will replace every song with Never Gonna Give You Up, but leave the metadata and filename the same
 
I'm already halfway broken into their system ;p
none of these systems have USB 3 :(
and this is the sort of work that SHOULD be set up and done in parallel
 
@JourneymanGeek LAN
 
You obviously need one of those USB3 → USB2 adapters from Ali!
 
lol
@Rahul2001 eh, problem is lack of storage too
I have one USB HDD
 
@satibel 7min 12 sec.
 
Bob
7:46 AM
@Rahul2001 s/LAN/SATA/
 
That too
 
ehh maybe
anyway meh, this seems to be ok timewise
not that many files
also they have seperate data and OS drives <3
 
That's always cool
 
hey
 
@Burgi 'lo
 
7:51 AM
ok this person has ONE taylor swift song
hm, tiramisu, AND the heimlich menuver....
 
@Avery sure. i'll send it via linkedin if that is ok?
 
@Burgi um, can't you just send it through steam or mail it? Or just send here.
 
1 sec
got it?
 
yup
 
@Burgi
> send us your application letter, CV and folio today.
folio is some sort of slang?
 
7:55 AM
portfolio
 
@Burgi I figured, I've just never seen it used before
 
i think they were trying to be "cool" and "wacky"
 
@Burgi messaged the link to a potential candidate.
 
ha. They should specify that the guy will be working as a minion too ;p
 
@Avery thanks!
 
7:56 AM
Whoo logo & CSS updated rahul.tech
 
@Rahul2001 you can't connect to the public IP of your own boxen
because routing? HOW DOES IT WORK
1. add 127.0.0.1 or the local IP of theboxen to your hosts file
 
@djsmiley2k Not my own box, server
 
test it again
thank me
Oh, not hosted at home?
you got fail2ban on it, and banned urself?
 
@djsmiley2k nope ;p
@djsmiley2k Nah, it worked eventually
 
dns issues maybe
 
7:58 AM
@djsmiley2k rahul fell to dns propagation or whatever it's called probably
caching?
 
No idea what was going on
 
@Burgi should I let you know of his name in case he applies?
 
um... i'm not sure
 
right, sorry.
Not really experienced in this kind of stuff.
 
@Burgi are you part of the recruitment process?
 
7:59 AM
@djsmiley2k yes :S
 
ok
Well you're not impartial anyway, no one is :D
 
Bob
> To move your cursor, simply use the 'hjklyubn' keys
> simply
 
hmmm
nethack controls? :D
 
Bob
@djsmiley2k Greed :P
 
is cloudfront having issues?
 
8:04 AM
folio's for artistic/creative types
 
nods
it is quite a creative role
 
@JourneymanGeek well, programming is creative, no?
 
eh. in a sense, you'd be showing off code vs examples of your work
 
not really in the same way
 
@JourneymanGeek well, your code is an example of your work.
 
8:09 AM
errr
 
errr
/me errs
 
hm. Lecturer just walked in with a request to see if we can download a youtubve video for a location with shit connections...
suggestions?
 
on windows?
 
123videodownloader
add on for firefox
 
8:13 AM
pwnyoutube?
 
or there's plenty of sites which'll just email you a mpeg
 
fracking rickrolled twice
jerk ;)
 
@JourneymanGeek I recommend clipconverter.cc
@JourneymanGeek Alternatively (windows application) youtubedownloadersite.com
 
I found the one @djsmiley2k was talking about and it worked
webm, but meh, I am pretty sure that'll play
 
8:25 AM
@Burgi Ain't this a beauty... rahul.tech
 
its certainly better
 
Bob
@JourneymanGeek youtube-dl is the de facto standard these days, btw
open-source and all
python iirc
 
eh in theory I should throw it on my server
 
8:55 AM
@Rahul2001 php hiss
 
@satibel Meh, I like php.
 
@JourneymanGeek youtube-dl
oh
bob already suggested that
it doesn't just support youtube either, it supports [warning, some named sites are adult sites that your work firewall might not like] all these sites
 
@Avery He he "Work firewall"
 
I work home
my work firewall is less restrictive than the one of turkey.
 
@Avery I work work, but our firewall is non existent outside of the ISP provided router.
 
9:17 AM
@satibel do you write game arcade games?
 
@Burgi sometimes, casually.
I did write a tetris in asm though.
 
i was wondering, do they have custom internals or are they just PCs in a big wooden box?
 
difference between excel 2016 and 2010 on a 100mb xlsx:
2016 takes 28sec, 2010 takes 7min13sec
 
same machine?
 
@Burgi depends, some have dedicated hardware, some are just mostly a pc with sometimes a custom mobo.
@Burgi yup
my arcade is a pc in an arcade box.
 
9:26 AM
i haven't been in an arcade in ages
 
interesting...
what are the dip switches for?
 
dunno.
 
lol fair enough
what do you do as a job?
 
addressing could be a guess
@Burgi rn, it guy/dev in a small company.
tough, i'll go freelance in a few months
 
9:30 AM
the general "it guy", been there :)
freelance tech support or freelance dev?
 
freelance a lot of stuff.
general IT consultancy stuff, small scale prototyping/R&D/engineering, electronics, and russian massage.
 
ah ok.... wait what?
 
XD
 
@Burgi Oh, I know, I've used them. They're used to set different IDs, so in Arduino projects, each arrangement runs a different script. In RF projects, I use them to select the frequency
 
also, easy mechanics (oil/ tire change.)
 
9:34 AM
why are you going freelance, if you don't mind me asking?
@Rahul2001 so in the context of an arcade they are to set which player number the cabient is?
 
@Burgi because I hate schedules.
 
@Burgi Idk, but they're usually used to assign IDs and prevent conflict
 
6 mins ago, by satibel
addressing could be a guess
kinda what I meant :p
 
@satibel lol, being freelance means you have tighter schedules!
 
@satibel missed that message ;p
 
9:38 AM
@Burgi Saner....
If the schedule is insane, don't take the work
 
heh! speaking of freelancing... @Rahul2001 did you get sorted?
 
Did MS just kill SMB1?
0
Q: Can't access NAS shares after latest Windows Updates (WD My Book World)

CodingYourLifeSince the latest Windows Updates installed today we can't access any of the NAS network share folders. We have an old WD My Book World. Tried with several PCs but I think they are all with the latest updates. net use q \\My.Nas.Ip.Here\Public gives me: Systemerror 67 Any ideas? I can acces...

 
@Burgi na. The person told me to find out how to make it work on shopify, and I can't seem to be able to...
 
have you spent longer than 20 minutes on it?
 
@Rahul2001 PROFITS!!!!
 
9:44 AM
@Burgi 3 hours
 
walk away
 
More like 2
But yeah
 
user226528
##info
 
@FleetCommand I awoke on Wed, 14 Jun 2017 00:02:46 GMT (that's about 7 days ago), got invoked 41 times, teleported 26 goats
 
user226528
##caaat
 
9:49 AM
 
/me gets the flame thrower out
lil' burny.
 
user226528
🙈
 
ugh this system has 2 hours to go, and I still have one more of these geriatric pieces of junk to go
 
@Burgi I mean, if I work from 3 am to 9 am and get the job done, that's ok
 
user226528
These VGA cables are strange. It is the female side that transmits.
 
9:54 AM
o0
most vga cables are male-male
 
user226528
This one is a CP2602
 
@JourneymanGeek isn't it gay pride day today?
 
oh, that's so you can connect a normal vga cable to it
@Burgi is it?
 
bitbucket has a little rainbow icon
 
user226528
I know. The micro-HD side connects an image transmitter, say a computer.
 
user226528
9:57 AM
I was wondering if I could use these to have a slideshow.
 
user226528
The problem is, the projector technology seems to have stuck in 1992.
 
@FleetCommand that's what we ususally need them for
 

« first day (2511 days earlier)      last day (2512 days later) »