« first day (913 days earlier)      last day (4027 days later) » 

3:27 AM
@hhh There are multiple ways of achieving that. Since your requirement is possibly analog, that may make things a little more expensive.
 
Hi Anindo. You want to take a crack at this, in case I missed something?
 
@angelatlarge Too early for me to cope with SO :-)
 
@AnindoGhosh Ok. Good morning :) I just figured I'd send fun SO stuff your way. But it is not Ardweeno
 
@angelatlarge I treat SO as a necessary evil. :-) Oh by the way, for the concurrency question, why is nobody talking about RTOS on MCUs? It was being discussed right here on chat a couple of days ago.
 
3:42 AM
@AnindoGhosh Because a) I don't think it provides the kind of concurrency the OP is looking for or b) Because I don't even know what RTOS is, really.
 
@angelatlarge It'll give the same kind of concurrency your answer does: That's the best effort on MCU platforms.
 
@AnindoGhosh You should post an answer then!
@AnindoGhosh I thought my answer was pretty clever when I came up with it, BTW.
 
@angelatlarge I agree your answer is quite cool. It's what got me thinking: That's the kinda stuff any real time OS would be pulling off oftentimes.
 
@AnindoGhosh Maybe I should find out about RTOS then
 
@angelatlarge why do I not answer? Because I get engrossed in answers, and I've only slept 2 hours due to other work.
 
 
2 hours later…
user61389
5:58 AM
Good morning!
 
6:21 AM
Hiya @CamilStaps
 
Weird bug with the AVR compiler, I have a function void eng_AssignAlgorithm(Algorithm algorithm, Voice voice)
if I reverse the arguments to the function call, it breaks the code
if I have them the opposite way, it works fine
 
@CamilStaps You still trying to get your PIC->AVR reopened?
@CamilStaps Hallo
 
user61389
@angelatlarge no, clabacchio doesn't reply, so I rolled back to the original version, so that I could accept an answer
 
user61389
I still disagree it should've been closed, but I got my answer (and rep)
 
@CamilStaps Rolling back to original on a closed question allows one to accept an answer?
@CamilStaps You got way too much rep on that!
 
user61389
6:34 AM
@angelatlarge not like that, but it would've been weird if the accepted answer had headings that the question not had, etc. Now Q&A fit each other better.
 
@CamilStaps Although sometimes it is the silliest questions/answers that bring the most rep
 
user61389
@angelatlarge thanks man :P
 
My most upvoted answer:
11
A: What there was before Arduino?

angelatlargeThere might be a bit of confusion as to what Arduino is: Arduino is not just the hardware platform, but also a set of software that allows the same code to run on most/all of Arduino-compatible boards. However, since your question seems to be about hardware, I'll stick to that. Arduino was firs...

I mean WTF?
@CamilStaps Anytime
And yours looks like
10
A: Why do we still take digital logic?

Camil StapsTwo reasons: Someone has to actually make that "technology that can simplify everything for us", they have to know how it works. Knowing how a system internally works helps the understanding on a higher level. In an analogy, we could say: "Knowledge of Assembly programming helps you making C pr...

If I had to pick one of my answers to be the most upvoted it would be something completely different, you know?
 
user61389
@angelatlarge I see that more as As on the sillest Q get the most votes, because everyone is annoyed by the question and then there is one that formulates it nicely
 
@CamilStaps Hmmm.. maybe. You remember this?
 
user61389
6:37 AM
@angelatlarge what?
 
5
A: How strong are the Arduino boards relating to interference robustness?

angelatlargeUnless I am misunderstanding the OP, then answer is a "no", unless it is raining energized transformers. Rain (the kind made of water droplets) does not generate EM.

 
user61389
@angelatlarge you answered that? Lol
 
user61389
Oh wait I've seen that, I upvoted it
 
@CamilStaps Yeah, exactly! We had a long discussion of it here.
 
user61389
That guy got positive rep for that question.. +4/-6
 
6:39 AM
@CamilStaps +4???? They accepted my answer :]
 
user61389
@angelatlarge on the Q I mean, 4 upvotes 6 downvotes
 
@CamilStaps Yeah, I got ya. I was just adding another slightly weird point.
 
user61389
@angelatlarge yes, well, new users :)
 
user61389
You didn't hit 2k yet! I'm disappointed, you whoriest whore of all
 
user61389
(might want to put that in your bio)
 
6:41 AM
@CamilStaps I've been Androiding. Answered a question on here, and even though @AnindoGhosh thought my answer was clever, he didn't feel the need to upvote it :)
Got a few rep on SO: wrote another monograph-length answer.
But mainly writing a sample Android app
 
user61389
@angelatlarge poor you. What've you been making for android?
 
@CamilStaps Nothing very special: just trying to learn it a bit. This app has been written a thousand times over, I think: logger for the accelerometer data. I need to find out bike commutinc acceleration/deceleration patterns.
 
@angelatlarge Reason: A bit of additional research and a view on RToS implementations on MCUs, pro and con, would have made it a definitive answer.
 
@AnindoGhosh (I am mainly giving you hard time): yeah, I wasn't into putting in the time into making it a definitive answer, esp. since I know zero about RTOS
 
Both my first and my second top-scoring answer are, I feel, well deserved.
44
A: Heuristic explanation of the usage of a pull-up (or pull-down) resistor needed

Anindo GhoshFirst: Yes, your understanding is essentially correct, other than the issue being voltage and not charge. Here is my analogy: Consider a door to a house, with really smooth hinges, and no bolt or latch. The door is so light and so well-hinged that the slightest breeze would cause it to flap ope...

 
6:46 AM
@AnindoGhosh We all already upvoted it!
 
21
A: Why do these LEDs have different brightnesses

Anindo GhoshThis is going to be really long, so just skip to the summary sentence at the end to avoid TL;DR. There are several factors contributing to varying millicandela ratings of LEDs, and more importantly the relevance of the mcd rating to the intended purpose: Angle of dispersion / beam angle: Th...

 
user61389
@angelatlarge haha, probably. But nice!
 
@angelatlarge I was not asking for an upvote. I'm already 10k, so no particular benefit / motivation.
 
@AnindoGhosh Agreed on the pull-up/pull-down.
@AnindoGhosh Except that wasn't it you who said to me few days ago: while you are there (looking at the answer) you might as well upvote it :)
@AnindoGhosh Maybe it was @jippie...
 
@angelatlarge It could be me falling into the spirit of the conversation, but in general I've stopped looking at my rep more than perhaps once a couple of days.
 
6:50 AM
Is this on-topic?
0
Q: connect cdrom to new motherboard

Shash Hi, I've bought new Intel DH77EB. replacing my older motherboard 915GAV. I thought of reusing older DVD writer. but i'm unable to connect the "40-Pin" data cable to the new board. am i missing something ?

 
@angelatlarge for Super User
 
user61389
@angelatlarge no, if anywhere, it belongs on Super User
 
Do new motherboards not come with an IDE channel anymore?
I haven't done a build since like 2009
 
user61389
@Bitrex don't know, but I hope so
 
user61389
However, is there a way to interface a SATA disk with a microcontroller? I've used IDE before, but never SATA.
 
6:59 AM
@Camil probably not directly
pretty sure you need some kind of controller IC
 
user61389
@Bitrex too bad
 
Android SDK if full of stuff like this: "float GRAVITY_DEATH_STAR_I Gravity (estimate) on the first Death Star in Empire units (m/s^2) "
 
 
1 hour later…
8:24 AM
@CamilStaps sata protocol uses serial with order of magnitude in Gbps
good morning @all
 
user61389
@jippie morning - so it really isn't possible, is that what you're saying?
 
everything is possible
you might need a fast shift register :-p
don't think it is easy
 
why not use en old external USB disk enclosure and reuse its electronics?
mornign @abdullahkahraman
@abdullahkahraman ah just wanted to upvote you because you had weeks without rep change, but I see you managed some rep yourself already
 
@jippie Yeah, some fellow enginEEr helped me ;)
and thanks!
However, you could always give an upvote to my upvote-deserving questions..
 
8:34 AM
@abdullahkahraman I already upvoted that one.
;o)
 
user61389
@jippie haha, I'll just save my old PATA drives
 
@jippie So I have one upvote-worthy answer?
:'(
 
@abdullahkahraman the envelope detector was good, yes.
 
8:55 AM
There are bidirectional PATA<-->SATA adapters available, and they're pretty cheap in India, so I suspect @jippie is right, it's some kind of basic RAM buffer + shift register.
The entire electronics fits inside the connector.
 
9:30 AM
lol
 
user61389
9:40 AM
Hm, switching to the XC8 compiler, now getting errors in the compiler's pic18f4620.h... Any ideas what might be going on? (@abdullahkahraman?)
 
@CamilStaps You should include only xc.h and everything will be taken care of in the preprocessor.
#include <xc.h> // Include the compiler's header file.
Here, copy and paste, lol
 
@abdullahkahraman no he is not
 
@jippie Hmm..
 
user61389
@abdullahkahraman I did, same problem
 
@CamilStaps What error message does it throw?
 
user61389
9:46 AM
@abdullahkahraman A lot, pastebin.com/ftiGvD4e
 
@CamilStaps What is "extern" used for? I have been seeing it but could not understand..
 
user61389
@abdullahkahraman it means it's defined in another file, I believe
 
user61389
180
Q: What are extern variables in C?

shilpaCould someone exactly explain the concept of extern variables in C? The declaration, exact use of extern and its scope.

 
@CamilStaps Yeah, I have searched it.. But couldn't get why..
 
user61389
@abdullahkahraman I'm not sure what it means either. But it's the compiler's file...
 
9:51 AM
@CamilStaps That is very interesting..
It is spitting out errors that are non-sense.
For example;
(374) missing basic type; int assumed (warning)
It is already defined unsigned char
 
user61389
@abdullahkahraman yeah, it is. unsigned char is valid code for XC8 as well, right?
 
user61389
According to the user's guide it is.
 
@CamilStaps Yeah..
 
@AnindoGhosh in the neighbourhood by any chance? (regarding USB microscope)
 
Just got home, @jippie, what's up?
 
10:05 AM
@AnindoGhosh you showed us a usb microscope the other day in hangout
what were your experiences again?
do you know the type number by any chance?
 
@jippie I'm very happy with it. It's best used at minimum magnification, since seeing half the thickness of a single pin filling the screen is useless :-)
 
:)
 
Points of note: The depth of field is very small (as with small primary element microscopes in general), so best to mount it vertically directly above the work point, so that the whole IC (for instance) is in frame and in focus.
 
@AnindoGhosh so I want a desktop mount, don't I?
 
@jippie I'll give you a link to the one I bought. If I were buying again, I would buy the next higher model, since that has a more powerful light (8 LEDs instead of the 4 on mine).
@jippie My current approach is a hacked red bull can, but I intend to do something permanent this week for it.
By the way, it is not really 2 megapixel, it simply interpolates that in software. It is slightly above 1 mp.
 
10:11 AM
m
@AnindoGhosh I'll check it in a minute, but I should be looking for the 8 LED version, right?
@AnindoGhosh do you know how it registers on the PC? is it a regular webcam?
 
@jippie Yes. that way, you can turn the LEDs down of course, but if you turn them to the max, you should get a lot more light than I do. That's important only when doing solder crack inspection, otherwise 4 LED = more than sufficient power.
@jippie Yep, a regular HID camera
@jippie No drivers needed
 
hhh
Yes, I know there are many ways, q below. The BLE113 has 12-bit ADC working with a battery and a slot of sensor so very simple circuit.

http://electronics.stackexchange.com/questions/67414/wearable-electronics-in-which-kind-of-electrically-insulated-mold
 
@Camil You there?
 
@hhh Have you watched Mike's video on Nike's wearable somethingIdontRemember
 
hhh
@abdullahkahraman no, which video?
 
user61389
@AnindoGhosh kinda, what's up?
 
@CamilStaps Your ring of LEDs question, I'm not able to understand it: Do you mean that all LEDs should light up at one time (parallel them), they should light up in a visually linear increasing intensity ramp (I have an answer previously posted for that), or light up in sequence but with a smooth ramp-up profile for each consecutive one?
 
user61389
@AnindoGhosh not me, I'm only the editor!
 
@AnindoGhosh I'm thinking linux ;o) I should probably get it working then
 
@CamilStaps Ah, oops.
 
user61389
10:22 AM
I think we need some more information on that one, but wasn't sure, so I'll leave that to the experts :)
 
@AnindoGhosh So what magnification factor, in your opinion, is good to read the fine print on SMD's and inspect solderings?
 
@jippie That would depend on how big your monitor is and what resolution you run it at: I use 1600x1200 on a 19 inch monitor, so I use around 20x to 25x for seeing an entire SOIC-8 at one time onscreen, perfectly readable part numbers.
Also, I turn the LEDs low and use a separate light at a sharp angle from the side, if the part number is etched rather than printed. That brings out the etching in relief.
 
10:39 AM
@AnindoGhosh So I don't need 8 LED's at all as I would need an external light anyway?
 
@jippie The external light cannot be used for inspection, since you would need the light to be coaxial with the microscope. There is no way to put an external light in line with the microscope except for the integrated LEDs. The external is useful solely for reading etched stuff.
@jippie But yes, I've almost never really needed more light than the 4 LEDs provide. I just feel that some day I might want a bit extra light.
 
I C
@AnindoGhosh there is a red button on the side, what is it for? Are you sure there are no strange controls on the device that requires windows drivers (I'm on Linux)
 
@jippie, when you see a red button you should use my approach of pressing it to see what happens
 
@jippie The red button is for "take snapshot", something I've never needed - I just do that from whatever software I am using to view the camera.
It would only be useful if the camera were far away from the PC, I guess
 
@PeterJ but the button looks like ^^^^ and it says 'Launch missile'
 
10:51 AM
@jippie, well don't procrastinate, press it!
 
@abdullahkahraman, haha, we were given a kitten for Christmas that for a while though similar stunts were a good idea with our two older cats. Fortunately they're a bit too old / lazy to have made good contact in their 'response'.
 
@PeterJ Yeah, I love how they get motionless after years :)
 
user61389
11:27 AM
Haha @abdullahkahraman, I forgot to set the toolsuite to XC8, it was still set to C18
 
@CamilStaps Oh, I really didn't want to ask you that..
lol
 
user61389
@abdullahkahraman :P sorry! However, I'm still getting errors like before, pastebin.com/hDGVbJRB
 
@CamilStaps Can you try creating a new blank project?
 
user61389
@abdullahkahraman good idea. Same chip I presume?
 
@CamilStaps Yeah
 
user61389
11:36 AM
@abdullahkahraman hm, it works.. I'll just build my project up bit by bit and see where the error comes from then. Thanks :)
 
Man, there is a LEGO stackexchange and here is the dedication:
118
A: How much usage can a LEGO piece take before it loses its 'clutch power'?

pcantin37,112 times Well I did it. I built a machine to test this. It took 10 days until the LEGO at the bottom couldn't stay on anymore. Check my blog for more details

 
user61389
@abdullahkahraman we found a SE community more geeky than us!
 
@CamilStaps Man, he made a LEGO wear-out tester!
 
@abdullahkahraman there is a vid too
 
@jippie Yeah, I watched that! Isn't it great ? :)
 
11:59 AM
@AnindoGhosh You may like this: tangentaudio.com/2013/03/aziz-light
 
user61389
12:20 PM
@abdullahkahraman just to let you know, you don't have to reply: stackoverflow.com/q/16262691/1544337
 
Have any of you guys used hspice before?
 
@CamilStaps lol, I like your "full code"..
@CamilStaps But I can upvote ;)
 
user61389
@abdullahkahraman I striped my old project to this, also removed all other files from the projects... and still... thanks :)
 
@CamilStaps, do you put the linefeed at the start of the file, or before #pragma so it works as posted?
 
user61389
@PeterJ at the start of the file, so that's the same code but with a blank line on top
 
12:32 PM
@CamilStaps, no idea then, I thought it might have been the include file not being terminated properly. Just switch to an AVR and all will be cool ;)
 
user61389
@PeterJ hah, thanks anyway
 
user61389
I think I'll just discard this project and start a new one, let's see how that goes
 
@CamilStaps, If you don't believe me take notice of prophecy of @W5VO which is the most starred comment at the moment ;)
 
user61389
@PeterJ :)
 
user61389
This is just weird. I made the exact same project like before, and now I do get the errors again.
 
12:47 PM
@CamilStaps Make a clean re-install?
 
user61389
@abdullahkahraman this is a new pc, I just downloaded everything, this is the first project I try to build :P
 
@CamilStaps Wow..
 
user61389
@abdullahkahraman yeah :) now understand why I'm trying AVR? :P
 
@CamilStaps I hate AVRs.. Just because of their datasheets :)
 
user61389
@abdullahkahraman we'll see
 
1:00 PM
@CamilStaps, just spent a while looking and can't see wht you'd get that error so I can't help at all.
 
user61389
@PeterJ thanks for looking anyway! Appreciate it :)
 
@abdullahkahraman, I've used both PIC and AVR, is there a particular reason you don't like AVR datasheets? I've always found them about the same in quality.
 
@PeterJ I don't understand them, I mean I don't quickly understand them.
 
A Q&A site proposal, Beer, is now moving into the commitment phase. :-)
 
user61389
@jippie oh god
 
1:06 PM
+o
 
@abdullahkahraman, fair enough. I seem to remember some PIC datasheets do include some better examples, although at the same time I've been badly burnt (cost me over $1K) by a PIC datasheet that was preliminary and implied a voltage / frequency that wasn't possible.
 
@PeterJ Wow, that is a little hursh..
Sorry.
 
user61389
What's up with this user? electronics.stackexchange.com/users/23176/dean Is Dean another nick?
 
user61389
 
@abdullahkahraman, no not really, just saying documentation between the two is better between the two in some areas than others. Both have pros and cons, PIC does have good advantages for some low power and high volume applications and they do carry support their product lines longer.
 
1:12 PM
@PeterJ Yeah. That is one of the reasons I use PICs. They are cheap.
 
user61389
@abdullahkahraman they're both free, when sampling :)
 
@PeterJ Now that I did a small search in Digi-Key, sometimes AVRs are cheaper.
@CamilStaps lol, I cannot have samples, here in Turkey.
 
user61389
@abdullahkahraman really? Why not?
 
@CamilStaps They forward you to the distributors and the distributor does not give samples for free :s
 
user61389
@abdullahkahraman that's too bad..
 
1:17 PM
@CamilStaps Yeah, too bad for students.
If we wanted to sample it, we would buy one, no problem.
 
user61389
@abdullahkahraman hm okay
 
@PeterJ I think you can modify the stack register on almost all ATtinys?
 
Once I had four sales / field engineers from Littelfuse turn up to visit me when I ran a small company, even though I said upfront even if the niche product I was working on was successful I'd only be buying $1000 at most of their parts. It turned out they just wanted an excuse to visit Tasmania and it was on their way to a skiing trip in New Zealand :)
@abdullahkahraman, not sure but I'd assume so. They can run C code that would typically need it.
 
@PeterJ @CamilStaps I think I will give AVRs a go, too.
 
user61389
@abdullahkahraman really, nice! Then Olin will be the only PIC lover left on the stack :)
 
1:31 PM
@CamilStaps lol, he is a certified Microchip design partner
If I practice AVRs too, then I will be able to use the cheapest in our designs!
I love how the datasheet for ATtiny 24A/44A/84A shows C code examples.
 
user61389
@abdullahkahraman why doesn't that surprise me?
 
@CamilStaps haha!
 
1:46 PM
sigh. It's painful when I work my ass off on an answer only to find the question is a year old! electronics.stackexchange.com/a/67453/16047
 
can I strike out text in a comment @CamilStaps?
 
also, hi everyone
 
@StaceyAnne Hi
 
user61389
@jippie I believe <strike> doesn't work, no
 
@StaceyAnne So sad I never vote on answers/questions that are out of my league ;o)
@CamilStaps nope, neither does <s>
 
user61389
1:52 PM
@jippie I believe no HTML is allowed in comments :(
 
2:06 PM
Anyway I might head off for my beauty sleep, not that I need any of course.
 
@PeterJ lol
 
2:22 PM
Hi everybody. i'm learning electronics and have a question. on a transformer , " 1k:8R " is written. does it means it have a 125 turns ratio (primary / secondary ) ?
 
@tigrou don't know. Maybe a picture will help.
 
user61389
@tigrou I think it means the primary coil has a resistance of 1K, and the secondary coil one of 8 Ohm, I think. You can check that with a multimeter
 
here is the circuit : i.stack.imgur.com/jlfF0.png
 
user61389
@tigrou ah, it's written in the circuit. That makes your own explanation more likely.
 
@tigrou at least you are not fainthearted: learning electronics and starting with a 20kV circuit
 
user61389
2:26 PM
Where did you find this circuit?
 
@jippie : i'm will not build it, just interested by theory
i'm trying to simulate in it circuit lab
but dont know what to give as parameters
 
I think it is the turns ratio: 1k (=1000) turns high voltage side, 125 turns low voltage side.
so the voltage will be multiplied by 1000/125 = 8 at its output.
 
the current will be 125/1000 = 1/8 times.
 
so 12 v => 1500 volts right ?
 
user61389
2:28 PM
Nice, people posting stun gun circuits online without explanation or warnings.
 
think the 20kV is a bit optimistic.
yeah 1500 is more likely
 
user61389
@tigrou that's the voltage on the output of the transformer, not directly the voltage on the output of the circuit - or is that the same @jippie?
 
@tigrou still a voltage that deserves special respect.
output of the whole circuit
the voltage at the transistor would be about 12V peak to peak, let's round it to 10.
then the transformer does about a factor 1000/8 = 125
I made a little error before, I mixed up the 125 and 8
so transformer will make (order of magnitude) 10V(pp) * 125 = 1250V
lets round that down to 1kV(pp)
then every diode/capacitor stage is a voltage doubler
so four stages
1000 => 2000 => 4000 => 8000 => 16000V
@tigrou again order or magnitude
 
@jippie : i run circuit (without the 555 timer) in circuit lab an get 12kv
 
I believe en.wikipedia.org/wiki/Voltage_doubler#Greinacher_circuit is the voltage doubler architecture
@tigrou that would be about right yes
 
2:40 PM
@jippie : does frequency of the 555 timer have a influence on final output voltage ?
 
yes
the transformer can saturate which is bad, just costs you a lot of energy that is lost (1)
the transformer is an inductor and therefore frequency dependent. (2)
 
ok
 
for (1) you want a higher frequency
for (2) you want a lower frequency
it depends on the transformer you have, what frequency it will work best for.
 
i think i'm going to write a question about this
 
Notice that the transformer's low voltage side has a DC component because of the simple circuit, may saturate the core aswell.
 
2:44 PM
by saturate you mean dont go higher than a certain voltage ?
 
the transformer core will saturate with magnetic flux
magnetic flux is caused by current
 
thansk again jippie
 
user61389
@tigrou you forgot about the voltage doublers. The calculated output should be (12*125)*2^4
 
@CamilStaps : are you really 16 ? if so, i'm impressed
 
user61389
@tigrou thanks - I really am, though not for long anymore ;)
 
user61389
3:02 PM
I'm out - see you later
 
Did you try to change the input voltage from sine to square wave @tigrou?
 
@jippie yes i already tried (even schema in question is using sine wave) : it didn't change anything
 
@tigrou the 555 is outputting a square wave, that's why.
 
yes, and (unless i'm wrong) low and high pulse length are not the same here
 
 
1 hour later…
4:33 PM
@jippie Identical rep on SO and EE.SE today. I am not answering anything or posting anything
 
4:48 PM
@jippie ...and not anymore. Crap, someone upvoted something of mine.
 
5:47 PM
@angelatlarge you need to make up your mind, you're always rep-begging and then you complain... ;)
 
@angelatlarge K, I'll go find 5 answers and help you out
 
user61389
6:28 PM
@angelatlarge I thought I'd answer a free beer question today, got only 1 upvote up to know! Highly disappointed, please help me out.
 
user61389
1
A: How does the maximum current of solar cells combine in series?

Camil StapsWhen connected in series, the maximum current is as high as that of the weakest link, so yes, 4A. The voltage will be the sum of all cells, so 1V. When connected in parallel, the maximum current is the sum of all cells, 12A in this case. If you do this, you should only connect cells of the same ...

 
@CamilStaps Are you whoring?
 
user61389
@angelatlarge I wouldn't dare!
 
@W5VO :)
@CamilStaps I don't know if that is a simple or a complicated issue. On one hand, voltage is voltage and current is current, but solar cells are weird...
@CamilStaps As can be seen from the discussion below your answer :)
 
user61389
@angelatlarge true, I didn't think of that, but it looks like Bobbi's confusing series and parallel. Anyway.
 
MLM
6:56 PM
Heya everybody!
 
@CamilStaps No, Bobbi's right, series cells need to be matched, else the one with lowest drive just fries. This happens even at the level of the little red solar cells used in calculators. I once tried adding a solar cell from one calculator, in series to a set of 4 I had liberated from another one.
 
amorph photovoltaic cells
I'm in doubt @AnindoGhosh if I should order one of those microscopes
 
7:30 PM
See @CamilStaps, according to @AnindoGhosh a little knowledge is a dangerous thing. Should we all go an downvote that answer :) ?
I didn't know we are starring cat videos here...
Is that you @jippie?
 
7:47 PM
?
 
user61389
@AnindoGhosh what do you mean with 'matched'? In current, voltage or both?
 
matched in performance
@angelatlarge I can only downvote an answer once
 
user61389
@angelatlarge That's what this room is about. Cats 'n beer. Back in the old days, there were some people talking about vacuum nanotubes as well, but those have become extinct years ago.
 
8:03 PM
 
8:23 PM
@CamilStaps Cats. It always ends with cats.
 
 
1 hour later…
9:42 PM
@jippie That old horse?
 
?
 
0
A: Personal electronics tool kit

jippie A pencil (and sharpener). Molten tin won't stick to the carbon of the pencil, so you can use it to open a solder pad or solder bridge. It is in the same category as desoldering braid and a solder sucker. I like to use one small and cheap breadboard for soldering. It holds pins nicely in place w...

 
uhhuh
@angelatlarge there must be a badge for digging up old questions, isn't there?
@angelatlarge and everybody missed the EE.SE login credentials!
 
10:13 PM
@angelatlarge you know who's birthdays it is today? cc: @CamilStaps
 
question for y'all.. the breakdown voltage is the effective clamp value for a TVS diode, correct?
reverse stand-off being where it won't conduct, and breakdown being where it's conducting like 90% or something
 
@TobyLawrence sound plausible, but I'm not really familiar with TVS'
turn it into a question, then I'll read it in the morning
 
I guess you don't want to design too close to the breakdown voltage
anyways
 
right
 
10:16 PM
time for bed
/me is out
 
peace homie~
 
@jippie No. Whose?
@jippie Ah, is that what you are working on? Necromancer?
 

« first day (913 days earlier)      last day (4027 days later) »