Hey, our old room got frozen. Did I correctly create a new room?

@atanamir yeah

@Sha

oops

oh, you're there -- cool

Been a while :)

I finished the drudgery of digging that trench. I'm trying to connect the conduit now.

There's only 1 large knockout on the bottom of the panel, and a bunch of 1/2 - 3/4" knockouts. Can I drill a 1-1/2" hole, or must i use the large knockouts on the side of the panel + LB bodies?

@atanamir which panel?

(and should I run sch80 between the panel and the underground section, or do you think sch40 will suffice?)

@atanamir eeeh, that's a good one for the inspector. the big issue with sch80 there is that the expansion joint itself is going to be sch40 wall thickness most likely, and that takes up a big chunk of the riser, so using S80 is of limited benefit, even though it ordinarily would be a good idea due to weedwackers etc

lemme get teh serial number, i can't find the panel in my e-mail history for some reason.

it's one of the siemens outdoor PL load centers

Pw1224L1200CU

Also, I got the 24" radius 2-1/2" 90 elbows, is that the larger one you were referring to?