I had a dualboot installation of Windows 7 and Debian that looked something like this: /dev/sda1 - EFI boot partition ~100MB (made during Debian installation) /dev/sda2 - unknown, likely Windows boot partition ~100MB /dev/sda3 - Windows C:/ drive ~217GB /dev/sda4 - swap ~8GB /dev/sda5 - Deb...

I'm having problems in windows displayed when I press the Super key. When Super key is pressed, an overview of the currently active windows in that workspace is shown. However, I use my laptop with a screen and take it on and off the screen frequently. So, whenever I change the setting i.e. eithe...

I want to allow Asterisk access (UDP Port 5060) to internal network only (192.168.3.0/24 and 192.168.4.0/24) and not allow external access. Relevant part of my iptables was: iptables -F iptables -t nat -F iptables -A INPUT -p udp -j ACCEPT iptables -P INPUT DROP iptables -I INPUT -p udp ! ...

I'm trying to play RDR2 using the fixed Proton version for RDR2. I cannot set the rendering engine to Vulkan ingame, it stays on DX12, even when I force it through the settings.xml and set it to read only. Another guy on github said he had the same issue and fixed it by using arch, so it seems to...

I'm trying to do some stuff with packages on a newly upgraded 18.04 (from 16.04), but I keep getting blocked by a bunch of packages with unmet dependencies. Here's the output whenever I try to install a package: adamthedog@adam-linux:~$ sudo apt install *any package* Reading package lists... Done...

I have a NAS drive (ZYXel 320) and I am following this instruction to install the folder called Files. I can check that when I run the following command: smbclient -L //192.168.12.237 I am able to see the disk that I want to install: Sharename Type Comment --------- ---- ...

My new online studying term is about to start within a few days. One of the required programs for a course is My Lab & Mastering Tools from Pearson. I am currently use Linux or to be more specific, Ubuntu, as the main OS in my laptop and would like to know if there is a way to work around and get...

I have a problem with properly display characters in UTF-8 with wineconsole with --backend=curses My locale: I run command: wineconsole --backend=curses cmd I know from the documentation curses that is default curses is installed with ISO-8859-1 but i want in cmd properly display UTF8. How to f...