Conversation started Oct 10, 2013 at 18:59.
Oct 10, 2013 18:59
Welcome to Project Update Thursday
Backsplash, and I upgraded the quartz counters to cardboard.
Nice backsplash.
have a few tiles to restick, and grout.
@ChrisCudmore Thanks
Oct 10, 2013 19:17
should of gone 18" up with the back splash :-P
Is the tape on the tiles holding in the stragglers that didn't hold to the backing?
@BMitch Tile's overrated, it's like they say: For everything you might use tile, there's a linoleum from the 70s. You should see my shower, who doesn't like paisley?
@Jason blue tape is marking which ones are loose and need to be reattached, they're supported well enough by the mesh, so the tape is just a marker.
Blue tape is fairly standard for pointing out issues on a walk through before closing on a new home. You remove the tape as you fix things, and once it's all gone, you can close.
Oct 10, 2013 19:38
So I'm looking at knocking out a support wall. What's a good price for an engineer to size the beam?
@BMitch No, you don't, because that wasn't my premise. My premise was you have to do the math.
IF the lighting usage in his case is a small fraction then the change will only be a smaller fraction
You're absolutely right that if his lighting is a bigger % that it can be a bigger change.
@TheEvilGreebo what if the only electrical devices in his house are lights. Imagine it. He uses a fire for heat and watches the paint dry instead of TV, for refrigeration he just blows on his food constantly to keep it cold. He could save some serious money changing all those lights.
@JimmyHoffa He'll save money changing all those lights regardless.
Why don't CFL's make a noticeable difference to you electric bill when they are advertised as being able to save you money?
that was the subject
If he only ever used lights, then cutting his lighting in half would cut his power bill in half
But the bigger question in your snark is this: WHY IS HIS PAINT TAKING SO LONG TO DRY!?!?
@TheEvilGreebo This is a very informative data point. I'll make sure marketing hears about it right away.
@#_$&*()@ MARKETING
Oct 10, 2013 19:51
@TheEvilGreebo In soviet russia, Marketing @#_$&*()@ you- err, I guess that's every country...
2
On the topic of lighting: I presume fancy new LEDs bright enough to light a room are of the last until the dinosaurs come back sort, not the last a couple years instead of a couple months sort?
True, true.
I know LEDs as a rule of thumb will basically be here until the nukes arrive, but these ultra bright ones they've developed that are bright enough to actually use as house lighting for all I know may not obey the same rules of the LEDs of yesteryear
Holy crap those things are expensive, nevermind that idea...
$10 a bulb, nuts
@JimmyHoffa $10 is a deal, with the recessed fixtures included, I think I was around $300 for 5 lights.
Oct 10, 2013 20:18
That's just first thing I saw off hand
Lady who owned my house before me was super sensitive to light so she has dimmers everywhere in the house, so I need dimmable
Which is frankly nice because I'm also part vampire I guess, I never turn any of the dimmers past a third
(it doesn't say it in the oneboxing but that light is $9.88)
Ugh, luckily The only recessed light I have is a can light or two
I needed fixtures that worked in recessed cans, and the recessed cans weren't cheap either.
@BMitch ... ? my can lights are just a recessed normal light socket
Actually, mine were 4", even more expensive: homedepot.com/p/…
Oct 10, 2013 20:22
I'm not familiar with a can light like that, mine's just a normal ballast recessed into the cieling, just screw any normal bulb into them..
My can lights don't come with the trim, so if you wanted the trim around the fixture, you either buy that separate or get it with the bulb: homedepot.com/p/…
I may have been closer to $200 when I got the lights, and there were probably a few other things on the bill. I just remember doing a double take and then realizing that the led's aren't cheap.
There's still a screw in light socket, but you shove it up in the fixture, screw in an adapter, and the bulb has a friction fit to the sides of the can.
@BMitch Ah yeah, I thought "can light" meant the trimmed in can ballast
I'll just use arbitrarily random terms to talk about things I don't know anything about, because what I don't know probably can't hurt me (there are people who will bring water if I try and burn the place down anyways)
@JimmyHoffa you and me both, I'm always getting corrected around here.
part of the fun of being here is learning that I'm wrong about something
Oct 10, 2013 20:56
Thanks for joining us for this week's PUT
 
Conversation ended Oct 10, 2013 at 20:56.