« first day (7 days earlier)   

Loic Daigle
Loic Daigle
4:56 PM
@MathKeepsMeBusy Where did you see it was rated for 10v? I checked and it says that it is 25v everywhere?😅
Btw for the inductor (CDRH125NP-180MC) I choosed one from the alternate (recommended) part on TI's Webench designer
 
Math Keeps Me Busy
Math Keeps Me Busy
5:51 PM
Description
CAP CER 0.1UF 10V X5R 0402
The "6" in the code CC0402MRX5R6BB104 refers to 10V.
You would need an "8" for 25V, or a "7" for 16V.
 
Math Keeps Me Busy
Math Keeps Me Busy
6:22 PM
My error. I copied the number from your table incorrectly. @LoicDaigle
You did a good job!
 
Loic Daigle
Loic Daigle
6:42 PM
@MathKeepsMeBusy No worries
@MathKeepsMeBusy Thanks!
Also, are you good enough with PCBs to say me if the overall PCB design is good?
The links :

Project link : https://oshwlab.com/loicdaigle31/hot-plate_copy

PCB Link : https://easyeda.com/editor#id=c9dda82af7504803a895a18855772cf5
Btw, I know the antenna of the ESP32 is placed really bad, but there were no other space to put it.
@MathKeepsMeBusy
 

« first day (7 days earlier)