morning

hullo kids

hm, I guess I should call the gilb ... I put otu all the breakers but the one for the outlet my scope is on, and still there is some horrible crap in some mhz range on the line... somone must be doing nasty things there..

5min*6 = 1 hour?

mean kw * 1/6 hour

do i need sum up all values OR i need to calculate "Mean" ?

you need to integrate the values

@PlasmaHH yes right

(or basically calculate how many kW/h each reading represents, and add them up)

@W5VO thank you so much

I wish my work hours were your variant of hours...

@PlasmaHH Sorry i made mistake...... i mean was 5min*12 = 1 hour

actually, it's kWh (as in kW * h)

yes

Thank you once again

0.5pWh off

intresting what people think of when designing something... temperature sensor and automatic switchback to high impedance when the 50 ohm termination resistor gets too hot

morning

hm, why would a laser printer need a waste toner container?

@PlasmaHH Because you chose an el-cheapo model that doesn't have the toner feed back option?

@jippie I dont think those things are cheap, their lowest models of the line start at 400€ or so... its a kyocera

@PlasmaHH isn't that what I'm saying?

@jippie well, if kyocera/1000€ means "cheapo" for you...

@PlasmaHH if it doesn't have the toner feed back thingy ...

or you bought the wrong make :-p

@jippie their 15k€ model of a similar series does have a waste toner container too... manual says to replace/empty it after so many toner cardridges...

@PlasmaHH wrong make then.

/me shrugs. I've seen laser printers with toner feed back. Don't know which make.

I solved the issue all together by printing on a pdf printer

seems like samsung, xerox, lexmark and canon are bad manufacturers then too

@PlasmaHH either that, or the thing didn't pay off. It's been couple years ago when I saw it.

anyways time to make some magnetic putty

damn, guys, how do you manage to work on projects for months at a time?

today i finished a co-op term of working on a design for 16 weeks and holy hell i am glad to be done with it

@Gregd'Eon you hardware guys are so impatient, I have been working on software projects for years

@PlasmaHH i did both hardware and software

twice the fun