How do I reset the designators on a PcbLib file? I've been creating footprints for my personal library and the pad designators keep incrementing, even in new parts/footprints.

Even if I rename the first and second pad, the auto incrementation goes back to the old count.

@WesleyLee Press tab while placing, change the number there, press enter

@Asmyldof -- yes, that is what I've been doing, however after I change the number to 1 or 2, it continues as the previous count (300, 301, 302 in the image). Another weird thing is, if I place a loose pad on a PCB (not on a lib) and rename it to 1, then on the lib it will "reset" the count to 2, 3, etc.. On the schLib editor however when I reset the designators on pins (to 1, the next one will be 2, etc). I couldn't find a setting for this.. :(

@WesleyLee In your first post you say you rename the pins in a way that implies post-placement. Are you actually doing it before you click, or only after?

@Asmyldof -- I meant before clicking, but I just tried before and after placement and the designators keep incrementing, even after I rename them to 1

Did you update to the latest Altium revision? Unable to reproduce your problem in 18.0.12

That could be it, I'm using 18.0.7. I'll try to update. Thanks!