TeX, LaTeX and Friends

Alan Munn

2:10 AM

@egreg Then there's New College, Oxford. Founded in 1379.

Ulrike Fischer

6:45 AM

@DavidCarlisle Saw it, sensible to start with version 7 ;-)

Paulo Cereda

7:31 AM

Saturday quack!

@JosephWright, @DavidCarlisle reuters.com/article/us-montypython-anniversary/…

Book Fountain Budapest

►

David Carlisle

8:15 AM

@JosephWright yet another way to get into a loop:-)

Hironobu YAMASHITA

9:17 AM

@DavidCarlisle We started working on English documentation of pTeX and friends; github.com/texjporg/ptex-manual/issues/6 Let me know if some additional topics are needed for you ;-)

5

David Carlisle

10:00 AM

@HironobuYAMASHITA thanks sorry if we have pushed you in to extra work!

meanwhile what is luatex doing here??? fi glue stretch? (@JosephWright)

\directlua{
local sp=65536
tex.setglue(100, 5*sp,1*sp,0,0,0)
tex.setglue(101, 5*sp,1*sp,0,1,0)
tex.setglue(102, 5*sp,2*sp,0,2,0)
tex.setglue(103, 5*sp,3*sp,0,3,0)
tex.setglue(104, 5*sp,4*sp,0,4,0)
}

\immediate\write20{100: \the\skip100}
\immediate\write20{101: \the\skip101}
\immediate\write20{102: \the\skip102}
\immediate\write20{103: \the\skip103}
\immediate\write20{104: \the\skip104}

\skip105= 5pt plus 1fil
\immediate\write20{105: \the\skip105}

\bye

Faheem Mitha

10:24 AM

I see that in one place I've nested \makeatletter & \makeatother pairs. I'm pretty sure this is unnecessary, but would like to check.

The code is:

\makeatletter
\@addtoplength{firstheadvpos}{30pt}
\@addtoplength{toaddrvpos}{40pt}
\@addtoplength{refvpos}{10pt}
\@addtoplength{sigbeforevskip}{20pt}
\makeatletter\@setplength{sigindent}{0.5\linewidth}\makeatother
\makeatother

Phelype Oleinik

@FaheemMitha It is. You can remove one pair here

Faheem Mitha

@PhelypeOleinik Great. Thank you. So I can remove the interior pair?

Phelype Oleinik

@FaheemMitha Yes. \makeatletter is \catcode`\@=11\relax. Once the catcode is 11, setting it again has no effect. Same for \makeatother.

Faheem Mitha

@PhelypeOleinik Yes, that's what I thought. Thank you for the confirmation.

David Carlisle

@PhelypeOleinik do you get fi glue with my testfile above ?

Phelype Oleinik

10:29 AM

@DavidCarlisle Yes

100: 5.0pt plus 1.0pt
101: 5.0pt plus 1.0fi
102: 5.0pt plus 2.0fil
103: 5.0pt plus 3.0fill
104: 5.0pt plus 4.0filll
105: 5.0pt plus 1.0fil

Hironobu YAMASHITA

@DavidCarlisle LuaTeX has fi glue stretch, which stems from Omega. It is documented in doc-1.8.tex of Omega "Draft documentation for the Omega system".

(mistake)

David Carlisle

@FaheemMitha you were lucky that your "inner" code was the last line, otherwise the later lines would not work at all

@HironobuYAMASHITA thanks! (I don't suppose the luatex manual could have mentioned that:-)

Faheem Mitha

@DavidCarlisle Yes, that would have been bad. I think I just mindlessly added it in there.

David Carlisle

@HironobuYAMASHITA I subscribed to the ptex manual issue (I don't think I want to watch the repository as most comments are hard for me, but if you need any proof reading or suggestions, I am happy to be pinged in that issue)

Hironobu YAMASHITA

The fi glue stretch is also available in e-pTeX/e-upTeX, but \gluestretchorder is the same as e-TeX. In LuaTeX, \gluestretchorder is different from e-TeX.

\ifx\directlua\undefined\else
\directlua{
local sp=65536
tex.setglue(100, 5*sp,1*sp,0,0,0)
tex.setglue(101, 5*sp,1*sp,0,1,0)
tex.setglue(102, 5*sp,2*sp,0,2,0)
tex.setglue(103, 5*sp,3*sp,0,3,0)
tex.setglue(104, 5*sp,4*sp,0,4,0)
}
\immediate\write20{100: \the\skip100}
\immediate\write20{101: \the\skip101}
\immediate\write20{102: \the\skip102}
\immediate\write20{103: \the\skip103}

David Carlisle

10:34 AM

@HironobuYAMASHITA ah, so you had advance warning of that issue.

Paulo Cereda

10:47 AM

@DavidCarlisle quack <3

David Carlisle

@PauloCereda you won't be able to help with the ptex manual unfortunately

Paulo Cereda

@DavidCarlisle oh

David Carlisle

This document is written for developers of \TeX/\LaTeX, who aim to
support \pTeX/\pLaTeX\ and its variants \upTeX/\upLaTeX.
Knowledge of the followings are assumed:
\begin{itemize}
  \item Basic knowledge of Western \TeX\ (Knuthian \TeX, \eTeX\ and \pdfTeX),
  \item ... and its programming conventions.
\end{itemize}

@PauloCereda see the requirements ^^^ :-)

Paulo Cereda

@DavidCarlisle /sad quack

David Carlisle

@PauloCereda don't worry it'll soon be dinner time

Paulo Cereda

10:51 AM

@DavidCarlisle yay! Oh wait

Faheem Mitha

@DavidCarlisle So you do ask questions. Just not here.

David Carlisle

@FaheemMitha or rather I make bug reports that may possibly be non bugs, just undocumented incompatibilities

Paulo Cereda

@DavidCarlisle don't look at my experimental branch in l3build then. :)

David Carlisle

@JosephWright do we have a policy on what to do with gratuitously incompatible primitives should we adjust the definition of \tex_gluestretchorder:D in luatex or just note that any commands we layer on that need to adjust for luatex, this gives 2 in pdftex and ptex and 3 in luatex :(

\documentclass{article}
\usepackage{expl3}

\skip100=10pt plus 1fill

\ExplSyntaxOn
\showthe\tex_gluestretchorder:D\skip100
\ExplSyntaxOff

\begin{document}

\end{document}

Faheem Mitha

@DavidCarlisle Well, at any rate, it looked like a question. As least, I could have sworn I saw a question mark in there.

Of course, I could have been hallucinating. It's been a hard month.

David Carlisle

10:59 AM

@FaheemMitha the ? wasn't a question it was a (?) which is just the polite form of @!***!<expletive deleted>@*@*

Faheem Mitha

@DavidCarlisle I see. So a form of expansion, then. Perhaps you should have written \?.

I just used hg bisect for the first time. It's very exciting. Still don't know what the bug is, though.

Skillmon

12:17 PM

Funny thing: If I load three packages in the order: ulem, mathtools and myfunnypackage I get an \rvert already defined error in my package, if I use mathtools, ulem and myfunnypackage or mathtools, myfunnypackage and ulem I don't get any error. ulem doesn't define \rvert and doesn't load any other package. Anybody wants to guess?

David Carlisle

@Skillmon blame @UlrikeFischer

Skillmon

@DavidCarlisle good idea, but still I wonder what happened (but am too lazy to really take a look)

@DavidCarlisle like what effect should ulem have on mathtools such that it defines \rvert or doesn't define \rvert

Phelype Oleinik

12:37 PM

@Skillmon Is myfunnypackage supposed to do \newcommand\rvert{} somewhere?

David Carlisle

\documentclass{article}

\usepackage{ulem, mathtools}
\show\lvert

\begin{document}

\end{document}

@Skillmon compare that with the version with mathtools,ulem you will see it is rather different

Skillmon

@PhelypeOleinik it loads newpxmath

David Carlisle

@Skillmon @PhelypeOleinik \DeclareMathDelimiter\lvert complains if \lvert is \delimeter.. but not otherwise (actually we should fix that for robust versions)

Phelype Oleinik

@DavidCarlisle Gah. I was trying to make the error with \newcommand. Makes sense now.

@DavidCarlisle I see MiKTeX's update strikes again :-)

David Carlisle

@PhelypeOleinik I assume so, we can definitely blame @UlrikeFischer for that.

Phelype Oleinik

12:51 PM

@DavidCarlisle The problem seems to be \set@curr@file undefind. I just updated TL and everything works fine, so it looks like it

Skillmon

1:02 PM

@PhelypeOleinik I'm not using MiKTeX, got this error after I updated TL today.

Phelype Oleinik

@Skillmon With the MWE in the question?

Skillmon

@PhelypeOleinik wait, which question?

Phelype Oleinik

@Skillmon Oh, we're talking about a different issue :-)

@Skillmon I was referring to this one: tex.stackexchange.com/q/511060/134574

Skillmon

@PhelypeOleinik ah, was really confused

@DavidCarlisle oh, the graphicx update caused me an issue as well...

@DavidCarlisle but that's because I used to include files with dots in their filenames by adding an additional pair of braces, but it looks like graphicx now detokenizes its argument. \includegraphics{{some.file}.pdf} used to work, now I'd have to do \DeclareGraphicsRule{.file.pdf}{pdf}{*}{}\includegraphics{some.file.pdf}, very annoying :)

Alan Munn

Everyone Who Tried to Convince Me to use Vim was Wrong

Skillmon

1:09 PM

@AlanMunn no.

David Carlisle

1:22 PM

@Skillmon sounds like a bug, let me see....

Paulo Cereda

@DavidCarlisle ooh

Faheem Mitha

Does \NewDocumentCommand enforce (or attempt to enforce) the number of arguments? Because I forgot to add an argument, so there was one less than there should have been. And TeX did not handle it gracefully. It spewed gibberish error messages.

Gibberish to me, anyway.

And it took me a while to figure out what was going on.

David Carlisle

@FaheemMitha arguments do not have to be marked in any way so it isn't clear what it would mean to check

Faheem Mitha

@DavidCarlisle I was afraid of that.

David Carlisle

If you forget the second argument for \frac and go \frac{1} + abc then it is not that you have omitted an argument, simply that you passed the unintended argument +

Faheem Mitha

1:32 PM

Any option to add a manual checking layer somewhere?

It's passing the data, but it didn't even get as far as Lua. I think TeX got confused while parsing the syntax.

David Carlisle

@FaheemMitha as I say it is not at all clear what it is that you want to check, It is not that the argument is missing, just that you have passed the incorrect argument, and how can the system know what you intended?

Paulo Cereda

@DavidCarlisle this.

Faheem Mitha

@DavidCarlisle I passed one less argument than I should have done.

There should have been 5. There were 4.

David Carlisle

@FaheemMitha no. You passed in something unexpected as the last argument.

Faheem Mitha

@DavidCarlisle You mean it grabbed stuff after the 4th intended argument. I understand that.

Still no fun to deal with, though. And imagine if I was on a deadline.

David Carlisle

1:35 PM

@FaheemMitha so there is not anything checkable, look at my frac example above + might have been a valid denominator it takes some human guesswork to guess it is possibly an error.

Faheem Mitha

@DavidCarlisle Yes, I saw your example, and I take the point.

Still it would be preferable to have something that did this kind of error checking.

Paulo Cereda

@FaheemMitha but as David said, it's not TeX's fault.

It is grabbing the argument, after all.

David Carlisle

@FaheemMitha what would you check for?

Faheem Mitha

@PauloCereda Well, I'm still going to blame TeX.

Alan Munn

@DavidCarlisle You could make all your commands delimited...

Faheem Mitha

1:38 PM

@DavidCarlisle Dunno.

David Carlisle

@Skillmon I don't think this is intended.

Faheem Mitha

@AlanMunn Personally, I still think I'll stick with Emacs.

David Carlisle

@AlanMunn yes, but not by {} (unless you use the dreaded g type:-)

Alan Munn

@DavidCarlisle Right. I had in mind things like \def\foo(#1)(#2){...} and the like.

Faheem Mitha

@AlanMunn commands delimited?

David Carlisle

1:42 PM

@Skillmon you are falling foul of some code added with this extensive documentation:

% \changes{v1.3a}{2019/07/01} {Support UTF-8 and spaces}
%    The quoting business for graphic files needs further sorting
%    out. This should be handled differently, right now we quote and
%    unquote all over the place as we still use the old code base.
%

Paulo Cereda

@DavidCarlisle ooh @JosephWright could tweet this documentation. :)

Alan Munn

@FaheemMitha E.g. \def\foo(#1)(#2){I'm #1 and I'm #2} will force you to delimit the arguments with parentheses. So if you leave one out you'll get a somewhat more sensible error message I guess.

Paulo Cereda

@AlanMunn for a broad definition of sensible. :)

Alan Munn

@PauloCereda Well \foo(A) B gives you "Runaway argument?", which for TeX is pretty good.

Paulo Cereda

@AlanMunn :)

@AlanMunn "I wish to have an argument, please"

Alan Munn

1:55 PM

@PauloCereda lol

@PauloCereda I see a new dialect of Python in the offing. Monty.

Paulo Cereda

@AlanMunn :D

Alan Munn

@Skillmon Just stirring the pot. (Or adding pineapple to the pizza.) :) (But you might want to read the article...)

David Carlisle

2:11 PM

@Skillmon this works But undoes support for UTF-8 characters in filenames which was the intent of the change.

\documentclass{article}
\usepackage{graphics}

\begin{document}
\makeatletter
\def\set@curr@file#1{\def\@curr@file{#1}}

\includegraphics{{z.z}.png}
\end{document}

Alan Munn

@DavidCarlisle So this is the Brexit hack. #makefilenamesblueagain

David Carlisle

It would be good if we could keep it working but actually it only worked by accident (dropping the brace) the equivalent code with \input{{z.z}.tex} would always have tried to input a file {z.z}.tex

@AlanMunn ask me if it is still needed next month

Paulo Cereda

@AlanMunn LOL

@DavidCarlisle LOL

TEH LATEX3 BUS

David Carlisle

2:31 PM

is it just me or could someone try todays update with luatex

\documentclass[12pt]{article}
\usepackage{graphicx}
\begin{document}
text is here
\begin{figure}
\centering
\includegraphics[]{example-image-a}
\caption{Test figure}
\end{figure}
\end{document}

Paulo Cereda

@DavidCarlisle looks fine to me, no error

David Carlisle

@PauloCereda no I see the problem I still have a 2018 lualatex, but not sure why fmtutil didn't remake it, checking....

Paulo Cereda

@DavidCarlisle blame... @UlrikeFischer?

David Carlisle

@PauloCereda I chose subtle and precise error correction: rm -r /home/davidc/.texlive2019/texmf-var/web2c

Paulo Cereda

@DavidCarlisle ooh

Skillmon

2:39 PM

@AlanMunn Now that I read it: I myself use the arrow keys in VIM, but only because my keyboard layout gives me arrow keys on the home position of the left hand with a modifier for the right hand (as well as backspace and stuff) and makes hjkl harder to reach (though other often used keystrokes much easier to reach), so I'm none of the hardcore use-only-vim-vim users, I think you should use VIM with the key combinations you find handy.

David Carlisle

@Skillmon could I use Ctrl-f ctrl-p, and ctrl-x ctrl-s to save?

Ulrike Fischer

@PauloCereda three blames one day - I shouldn't go on holiday.

Paulo Cereda

@UlrikeFischer oh no

Faheem Mitha

@AlanMunn Um. Not sure exactly what you mean.

Why does it force one to delimit the arguments with parens? And would whatever this is work with \NewDocumentCommand?

I'm tempted to ask a question...

Ulrike Fischer

@PauloCereda Only one duck at Taormina

Paulo Cereda

2:49 PM

@UlrikeFischer ooh

David Carlisle

@FaheemMitha because tex at the lowest level strips braces. you really can not tell the difference between \fbox{x} and \fbox x tex does not report the braces were there so \fbox can not be defined to check they are (well it can but not without completely changing the way the argument is parsed)

Faheem Mitha

@DavidCarlisle So, adding round brackets does what, exactly? Do the round brackets become part of the argument?

Paulo Cereda

@DavidCarlisle ooh parse tree

David Carlisle

@FaheemMitha no but thy are mandatory syntax. if you define \foo(#1)(#2){....} then when you use \foo there has to be two pairs of () or you get an error.

@PauloCereda with a partridge in it

Paulo Cereda

@DavidCarlisle LOL

Faheem Mitha

2:52 PM

@DavidCarlisle Oh. Would that work with \NewDocumentCommand? Though it's not defined with that syntax at all.

David Carlisle

@FaheemMitha yes or perhaps better just to make them optional and then give a custom error if they are not there, you could do the same with {} arguments using g

Paulo Cereda

@DavidCarlisle oh no G

Faheem Mitha

@DavidCarlisle It just needs to check for the right number of arguments. I realise type checking, or anything like it, is impossible. Since TeX doesn't have types.

David Carlisle

@FaheemMitha "right number of arguments" is such a tricky concept.

Paulo Cereda

@FaheemMitha I really don't follow. You want to force argument delimiters. It's not about right number of arguments IMHO.

Faheem Mitha

2:58 PM

@PauloCereda Isn't putting argument delimiters effectively forcing TeX to check for the number of arguments? Though I'm still unclear how it works.

David Carlisle

@FaheemMitha as said before you are not checking the right number of arguments you want to check that the final arguments have the expected type. If you go {.. \frac{1}} then you will get an error that the second argument is missing, but otherwise \frac always gets two arguments, it takes whatever the next two things are, so if you forget to supply the correct arguments it takes whatever is there unless you close the group with } so there are not two things at all.

Paulo Cereda

@DavidCarlisle damn those partridges! :)

David Carlisle

@PauloCereda they are not so bad but the lords-a-leaping do get in the way sometimes.

@Skillmon I've raised your \includegraphics issue with the team, we should probably make that work again.

Paulo Cereda

@DavidCarlisle oh

@DavidCarlisle Blame @JosephWright?

David Carlisle

@PauloCereda @UlrikeFischer

Paulo Cereda

3:11 PM

@DavidCarlisle ooh

David Carlisle

@PauloCereda 6611

Skillmon

4:35 PM

@DavidCarlisle thanks :)

@FaheemMitha but TeX has types, there are different types of registers, and it got tokens and boxes and ....

David Carlisle

4:54 PM

@Skillmon characters are made "safe" so \input{Gruß Welt} doesn't try to input Gru\IeC{\ss} Welt.tex but ...

Faheem Mitha

@Skillmon Do those count as types?

Paulo Cereda

@FaheemMitha depends on how you define type.

David Carlisle

@PauloCereda a box of lead bits with impressions of letters on them.

Paulo Cereda

@DavidCarlisle touché. :)

@DavidCarlisle sounds too old

David Carlisle

@PauloCereda there is a fragment of lead stuck to your e

Paulo Cereda

4:59 PM

@DavidCarlisle ooh French

Skillmon

@FaheemMitha yesn't. Well a skip is a different type than a length than an integer, though one could convert a length to an integer and vice versa, but the stretch and shrink is unique to shrinks, and token registers are different from the afore mentioned and boxes are pretty special, too. So I'd say yes, there are types in TeX, just not the conventional types one knows from general purpose programming languages.

Alan Munn

7:17 PM

@DavidCarlisle Ooh Schönfinkelization.

Their signature play is the three-point combinator, a recursive offense which is guaranteed not to halt and continues accumulating points until the buzzer.

David Carlisle

@AlanMunn that makes you a "nobody"

yesterday, by Harald Hanche-Olsen

@DavidCarlisle Currying was really invented by Schönfinkel – Curry merely popularised it. For some reason, nobody calls it Schönfinkelisation. (Oh wait, Frege did it first?)

Alan Munn

@DavidCarlisle Well in linguistics, most of us who know what currying is also know the term Schönfinkelization, because a well-known semantics textbook by two of the most important people in the field (who are also German) made a point of it. :)

@DavidCarlisle And checking out the Wikipedia page you linked to, it seems a linguist edited it, since that textbook is the reference they give.

Joseph Wright

@DavidCarlisle Need a low-level abstraction I guess: that's bloody annoying

David Carlisle

@JosephWright interesting I looked up the omega doc and it says that they chose fi specifically to undercut fil glue without being incompatible with existing macros then luatex imported it undocumented and incompatible....

Ulrike Fischer

@DavidCarlisle Why did that suddenly came up?

David Carlisle

7:32 PM

@UlrikeFischer I tried to answer a question on how to set a skip length from lua so I used tex.setglue and used 1 and 2 for the stretch and shrink order components but got fi and fil not fil and fill

5

A: How to Set Lengths (Glue/Skips?, not Dimensions), in LuaTeX?

The following shows the skip register \zzz being set to a stretchy value from Lua. It produces a log of \zzz has value 5.0pt plus 1.0pt minus 2.0pt lualatex document: \documentclass{article} \newlength\zzz \directlua{ local sp=65536 tex.setglue("zzz", 5*sp, 1*sp,2*sp,0,0) } \typeout{\z...

barbara beeton

@FaheemMitha -- Agreed. But anyone else who wants to switch, it's their choice.

Ulrike Fischer

@DavidCarlisle hm. Why was there a need for fi in omega? Why not adding filll (or whatever would have come next)?

David Carlisle

\subsection{New infinity level}

A new infinity level \texttt{fi} has been added.  It is smaller than
\texttt{fil} but bigger than any finite quantity.  Its original intention
was for inter-letter stretching: either \emph{filling-in-the-black},
as is done for calligraphic scripts such as Arabic; or for emphasis,
as in Russian; all this without having to rewrite existing macro packages.
There is therefore a new keyword, \texttt{fi}, and two new primitives,
\verb|\hfi| and~\verb|\vfi|.

@UlrikeFischer ^^

barbara beeton

@DavidCarlisle -- That means "When is it needed?" I think you really mean "Ask me next month if it is still needed."

David Carlisle

@barbarabeeton don't confuse @AlanMunn with linguistic details

Alan Munn

8:00 PM

@barbarabeeton Surely the original sentence is ambiguous. Unless you're concerned about commas...

barbara beeton

@AlanMunn -- Eschew obfuscation.

Alan Munn

@barbarabeeton Especially in vocabulary. :) And you're asking @DavidCarlisle to do this! :)

Ulrike Fischer

@DavidCarlisle so the main point was "existing packages " and now we have the incompatibility ; -(

David Carlisle

@UlrikeFischer I did wonder about asking for an option to change this to use -1 for fi but it seems to have always been this way in luatex so I'm not sure they will want to change things now (@JosephWright)

@JosephWright @UlrikeFischer not that tabu isn't broken anyway but things like \ifnum\gluestretchorder\tabu@cellskip =\tw@ \hskip-\tabu@cellskip are completely broken in luatex

Joseph Wright

8:15 PM

@DavidCarlisle Yeah, we need a low-level abstraction in expl3 I guess

Ulrike Fischer

@DavidCarlisle does anyone actually use that fi stretch?

David Carlisle

@UlrikeFischer given that omega is only available as a compressed tar archive on ctan, and its existence is not documented in the luatex manual, I doubt it, but the real pain is that gluestretchorder for fill glue is 3 not 2

Joseph Wright

@DavidCarlisle As Hans for a change I think

David Carlisle

@JosephWright OK, see what happens....

Joseph Wright

@DavidCarlisle If we don't get one, we should add an expl3 wrapper that 'knows' about this: probably to the core, for the LaTeX2020 business

Ulrike Fischer

8:31 PM

@DavidCarlisle yes, I was only wondering if it would break much if we request a change. I found only one hit in context and it seems not to do anything.

Paulo Cereda

@AlanMunn ooh

David Carlisle

@JosephWright overloading \gluestretchorder would be easy enough but unless we change tex.setglue as well to take the same numbers it might just get more confusing

@UlrikeFischer looking for fi specifically or for any use of fill numbers in tex.setglue?

Joseph Wright

@DavidCarlisle I was thinking of a wrapper precisely so we have proper control; we could alter the Lua table too ...

Paulo Cereda

@JosephWright ooh

Ulrike Fischer

@DavidCarlisle just thought that one should look for this too ... there are a number, but not much.

which number does ptex use for fi?

David Carlisle

8:43 PM

@JosephWright yes I know we could but it would be better if they did it, and changed the manual:-) it's easier to sell a latex3 named tex_glue_stretch_order: being different from the manual primitive than overloading the documented lua functions. grrr

@UlrikeFischer 0 as far as I can see (so you can't tell it is stretchy if you use that) (I suggested -1 in mail just sent)

Ulrike Fischer

@DavidCarlisle hm 0 isn't a good value too ;-). This reminds me a lot one of my math course about infinity types ;-)

David Carlisle

@UlrikeFischer the Continuum Hypothesis states that there are no infinite stretch orders with \gluestretchorder below 1

5

Ulrike Fischer

@DavidCarlisle we could assign 0.9999... to fi.

David Carlisle

@UlrikeFischer might need a few changes to the integer type to support that:-)

Ulrike Fischer

8:59 PM

@DavidCarlisle ;-). Okay then 666. Larger than one and it is improbable that some \filll will ever reach it.

Hironobu YAMASHITA

9:41 PM

I think, "gratuitously incompatible primitives" can be applied to \currentiftype. e-pTeX does not support \ifpdfabsnum and \ifpdfabsdim of pdfTeX, but supports \iftdir and \ifydir etc. Therefore, hardcoded test \ifnum\currentiftype=25 ... \fi will never be safe. List of \currentiftype of e-pTeX is described in eptexdoc.pdf, and the value will change from TL2019 to TL2020 by addition of \ifincsname to e-pTeX.

Joseph Wright

@HironobuYAMASHITA Ah :)

@HironobuYAMASHITA Useful to know: at some stage we may need to abstract that, then

Hironobu YAMASHITA

Changing \gluestretchorder/\glueshrinkorder of "fi" to something like -1 or 666 may be problematic; what will happen if you use \ifnum\gluestretchorder>1 to test if we have more than fil? I suggest it should be better to provide some wrapper on the macro layer, such as __gluestretchorder_fil to always point to \gluestretchorder of fil.

Hironobu YAMASHITA

9:59 PM

For example, pLaTeX has a macro `\removejfmglue` which uses `\lastnodetype` and `\lastnodesubtype` (the latter is e-pTeX specific primitive). In the implementation, we stock `\lastnodetype` and co on-the-fly, not by using documented value of glue (21):
\ifdefined\ucs\jfont\tenmin=upjisr-h at 9.62216pt
\else\jfont\tenmin=min10\fi
\tenmin\char\jis"214B\null\setbox0\lastbox%"
\global\chardef\pltx@gluetype\lastnodetype
\global\chardef\pltx@jfmgluesubtype\lastnodesubtype
\protected\def\removejfmglue{%

Joseph Wright

@HironobuYAMASHITA Like I said, need to abstract these over time

David Carlisle

10:25 PM

@HironobuYAMASHITA yes I couldn't think of anything better, as you say a wrapper macro might be better (but I was worried about keeping something with the Lua interface) I wanted to put forward some suggestion so I suggested -1,1,2,3 but it is not ideal and certainly open to other suggestions, I suspect luatex won't change and we have some time to experiment with finding some reasonably compatible wrapper.

Joseph Wright

@DavidCarlisle We probably should think about this more widely; I'm not sure about the \if... business, but for glue stretch we could have something symbolic

David Carlisle

@JosephWright you mean we could have symbolic names like \c_fil_order \c_fill_order that are 1 and 2 in pdftex and 2 and 3 in luatex, then if you only check against the variables not literal numbers it all works out?

Joseph Wright

@DavidCarlisle Yes, that would do it, although I was thinking \skip_compare_fill_order:nNn(TF) or something, with one argument being fi()(l)(ll)(lll)

Alan Munn

10:42 PM

@schtandard The rant storm seems to have subsided. :)

schtandard

@AlanMunn Yeah. Amazing how entitled some people can feel on the internet (or offline as well, I guess).

@DavidCarlisle What would have been be problem with 0, 1, 2, 3? Wouldn't it be rather intuitive to just use the number of l's as the argument?

Alan Munn

@schtandard Indeed.

David Carlisle

@schtandard because 0 already means finite stretch, like 5pt plus 2pt

@AlanMunn did we miss an argument:(

schtandard

@DavidCarlisle Oh, tricky..

David Carlisle

@AlanMunn ah so I didn't miss much then, I'll stick to being an expert on languages, as we know nothing of tex

Alan Munn

10:54 PM

@DavidCarlisle Seems like a wise choice.

@DavidCarlisle I'm quite surprised that the chat above isn't going on in Japanese, but I understand it's hard for the rest of us, so you're being very considerate.

David Carlisle

@AlanMunn ジョセフのために譲歩しなければなりません

Hironobu YAMASHITA

@DavidCarlisle very fluent Japanese ;-)

David Carlisle

@HironobuYAMASHITA I have total faith in google translate:-)

Alan Munn

@DavidCarlisle それは完全に理解できます。

David Carlisle

@AlanMunn I am sure you do

Transcript for

$TeX - LaTeX$ TeX, LaTeX and Friends