Do you need a shock pump for an air shock? Or will a floor pump do the job just slowly ?

Use a shock pump with the MonarchTM air valve adapter tool to pressurize the damper body to the proper air pressure.

500 psi, 34.4 bar

from sram-cdn-pull-zone-gsdesign.netdna-ssl.com/cdn/farfuture/…

Hoo yeah 500 PSI from a floor pump? Not likely!

I found mine mentions ~100 PSI which is well within range of a floor pump

tomorrow morning it is supposed to be 12C warm already at 08:00

that will be quite a comfortable commute

@Criggie sram.com/rockshox/products/high-pressure-forkshock-pump-600-psi

Floor pumps made for shocks usually go up to 300psi...

@gschenk yup, I'd be freezing at those temps probably. Living in a tropical country, and anything lower than 15C is simply not compatible :p where are you from?

heheh its all about what you're used to. The equatorial regions would be happy at 25-50 degrees.

alaskans are happy at 0