I'm in the process of rebuilding a fileserver. I've added new hardware and an update from Ubuntu 14.04 to 18.04. All my drives are recognized and I am able to mount my mdadm RAID fine.
I have a crontab that periodically rsync -avh --delete's the data from the RAID to an external drive.
In the ...
I have the following in my .bash_profile:
echo bash_profile
if [ -f $HOME/.bashrc ]; then
echo Sourcing bashrc
source $HOME/.bashrc
echo Sourced bashrc
fi
My .bashrc file is quite long, but at the end I have an echo Path set statement and some exports.
When I execute sudo su - use...
@Innovator-programmer How have you set it up? Likely if you're having that problem you will need to adjust the mount options. Probably the mount command will show something helpful.
I'm looking to write a script that will find and replace any characters other then
[^A-Za-z0-9._-] in a specific file type (in this case .avi)
with an underscore '_'. I want this to exec recursively from the current path.
I do not want or need to change any folder names as I have control over ...
If the current time is 20200121101010 (%Y%m%d%H%M%S)
here is my code
agof=`date +%Y%m%d%H%M%S -d '-5minutes'`
agot=$(date +%Y%m%d%H%M%S -d ${agof} -d "-5minutes")
echo $agof
echo $agot
I expected it as below
20200121100510
20200121100010
but it works
20200121100510
20200121100510
How ca...
I can not configure NTP on Ubuntu 18.04.3 LTS (Linux 4.15.0-74-generic). As a source of synchronization I want to use NMEA + PPS from GPS module.
GPS module is connected via USB using the SILABS CP2102 interface converter:
Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x...
I have an external wifi modem. Inside the ubuntu laptop, I have an internal wifi card and internal network card. I want my android phone and laptop to be in the same network without using internet. Is this possible? I dont want to enable wifi hotspot in the laptop.
I have the following in my .bash_profile:
echo bash_profile
if [ -f $HOME/.bashrc ]; then
echo Sourcing bashrc
source $HOME/.bashrc
echo Sourced bashrc
fi
My .bashrc file is quite long, but at the end I have an echo Path set statement and some exports.
When I execute sudo su - use...
I'm looking to write a script that will find and replace any characters other then
[^A-Za-z0-9._-] in a specific file type (in this case .avi)
with an underscore '_'. I want this to exec recursively from the current path.
I do not want or need to change any folder names as I have control over ...
If the current time is 20200121101010 (%Y%m%d%H%M%S)
here is my code
agof=`date +%Y%m%d%H%M%S -d '-5minutes'`
agot=$(date +%Y%m%d%H%M%S -d ${agof} -d "-5minutes")
echo $agof
echo $agot
I expected it as below
20200121100510
20200121100010
but it works
20200121100510
20200121100510
How ca...
I found this error and stuck here. kindly help
Installing the NodeSource Node.js 12.x repo...
Populating apt-get cache...
enter image description here
I can not configure NTP on Ubuntu 18.04.3 LTS (Linux 4.15.0-74-generic). As a source of synchronization I want to use NMEA + PPS from GPS module.
GPS module is connected via USB using the SILABS CP2102 interface converter:
Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x...
I have an external wifi modem. Inside the ubuntu laptop, I have an internal wifi card and internal network card. I want my android phone and laptop to be in the same network without using internet. Is this possible? I dont want to enable wifi hotspot in the laptop.
