How do I make the latest version of linux, Ububtu 16 temporary? meaning I want everything to be changed on each reboot (hardware ID, HDD ID, mac address local ip address, etc). I am okay with booting from a USB, without installing the OS. Maybe If I "try" linux, without installing it, it would ch...
For the moment, each time I restart my computer and login, I need to run
sudo su
echo -e "nameserver 8.8.8.8\nnameserver 8.8.4.4" > /etc/resolv.conf
service networking restart
To make a long story short, yesterday my internet connection worked perfectly fine. This morning I wasn't able to loa...
I bought this wireless network interface card for my new Ubuntu powered server, and it works fine with by Windows 10 laptop.
However, It isn't being picked up as a wireless interface card on my Ubuntu server.
Here is the output of sudo dmesg, after plugging it in:
[ 653.209304] usb 2-1.4: new...
I've noticed that unlike most logs, /var/log/auth.log isn't world-readable. What sensitive data is logged to auth.log that would make it have these more-restricted permissions? (I'm trying to determine if making it world-readable is safe). This is on Ubuntu 14.
dmesg logs is 'filled with' the following :
[613051.997981] sdf: sdf1
[613052.068773] sdf: sdf1
[613352.060804] sdc: sdc1
[613653.176468] sdc: sdc1
This just continues on and on about every 300 seconds(only sdc and sdf is shown).
Any reasons why this might be happening?
It makes reading d...
Benny there i no further action to be taken there, it is deleted and only high reputation members can see it, the mod's I think cant to more as that as well.
if you for example want to see all your posts who got deleted over the time you can use "deleted:1" in the Ask Ubuntu search. but this will only show you your own deleted posts.
-- Subject: Session 148 has been terminated -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat -- -- A session with the ID 148 has been terminated. Dec 08 09:23:54 audimiddleeast.com do-agent[1440]: 2017/12/08 09:23:54 Checking for newer version of do-agent Dec 08 09:23:55 audimiddleeast.com do-agent[1440]: 2017/12/08 09:23:55 No repository update available Dec 08 09:25:40 audimiddleeast.com sshd[25614]: Received disconnect from 121.18.238.39 port 33156:11: [preauth]
you could only fix this if hop no 13 is within your own network but my guess it isnt, do a traceroute from your place to check if the 4th hop from the bottom times out or where it times out
While it might be possible, it sounds like a horrible idea and a classic XY problem. What are you actually trying to do? What would you pipe to? What if the command expects input?
I'd like to edit my .bashrc so that every command executed on the shell is piped to something, for example:
$ sudo apt update
_________________
< sudo apt update >
-----------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
I hav...
@terdon What I propose should be harmless i any case, however if I understand OP correctly he doesn't want the actual command to be executed… setting BASH_COMMAND="" with trap unfortunately didn't work.
@dessert I thought the OP did want it executed. And yes, what you suggested does indeed seem to be harmless (and I upvoted). Absolutely horrible, mind you, but harmless :)
auto_enter inserts a string after every prompt, e.g. "man " – you can have a terminal tab just for manpages where you never need to type "man " this way :)
Trying to run
RUN chsh -s /bin/bash www-data
(dockerfile) i tried to change it to /bin/zsh but still doesn't work. Docker file is too long, there is the offical repository with the file https://hub.docker.com/r/alexcheng/magento2/~/dockerfile/
Result :
Password: chsh: PAM: Authentication ...
I can't start nginx for some reason;
I have done the following
The server is opensuse
Installed http://nginx.org/download/nginx-1.0.5.tar.gz
extracted the folder
run ./configure
make
make install
the nginx have been extracted to
/usr/local/nginx/sbin
where I can see the nginx..
But when I ...
I am Running Ubuntu on virtual box and emulated arm architecture (debian-armel) on it using qemu . But the ping is not working . Both the Ubuntu and emulated machines have got same ip 10.0.2.15
Can anyone suggest a solution?
Thank you in advance
I installed Ubuntu GNOME 16.04.3 on a Dell Inspiron 15 3552 recently. This laptop came with Ubuntu 14.04 pre-installed; so it should be compatible with Linux in general.
When running Ubuntu GNOME 16.04.3 for a while, the system stops responding to the mouse, a bit later it stops responding to th...
@KazWolfe youre firm with python right? can you read through this last edit and check if this last edit makes sense overall? askubuntu.com/posts/512069/revisions
simply had this tab open since this morning, it was an edit suggestion i skipped because of that uncertainty but i wasn't going as far as checking the github
I have finished arranging the post alphabetically, removing things that seemed obsolete, and adding things that happened to cross my mind. Please fix it as you see fit
@NathanOsman Why does IE even exist? Everytime I find something cool on CSS there's a 90% chance that IE is possibly the only one that does not support it -.-
On my Ubuntu server machine I got two network interfaces (two network cards):
auto eno1
iface eno1 inet static
address 10.0.80.24
mask 255.255.255.0
post-up ip route add 10.0.0.0/24 dev eno1 src 10.0.80.24 table rt2
post-up ip route add default via 10.0.14.1 dev eno1 table rt2
post-up ip rule ad...
'Twas the night before Christmas
And all through the kernel
Not a module was failing
Not even the journal
When out of the blue
There arose such a panic
I checked the logfile and
B͋͊̃̅̇͋ina̋͑̑̓̑r̸̆͌͝y͆ l̆o͌̍̑͆͑̀͂̐g͂͒̿filȇ̜̔͜͝ͅs ã̉r͓̅͋̂̒͘͜ë́͑͗̔ ḙ̷̦̔̉͟v̴̛̞̇̐̐̅̀͠il̴̑̐̎̏͏͚
#systemd
@Seth I guess we can pretend that comment never happened :S
@IanC sorry I didn't reply to you yesterday - Oli was asking for some output and I didn't want to push it off the page. I could have handled that better :) I made some black beans today with fresh corn and sweet potatoes :)
Being in this room still makes my heart rate act like I'm running uphill. Feel free to ping me if needed.
How long exactly is the grace period where I can change or even remove an edit to a post? Is it the same amount of time one has to retract an up-/downvote?
@Zanna Nothing wrong with VTRs. It's a healthy part of the site. It's just that asking for them (especially for your own posts) is sometimes in bad taste.
uhm not shure about the exact time in which you can edit a post again and it counts into the same revision, its not very long, something between 2-5 minutes max
Hello guys, have someone experienced problem with 17.10 login authentificate error ? Everytime i click on my user screen freezes. Searched all forum and no solution.
trying to fix this all day, no result :) any help would be appreciated
@Zanna Don't worry! That sounds really good, though I'm not a big fan of sweet potatoes. I like the regular cooked potato, but I don't like the sweet one or any of them mashed :p
when you have done those two commands, restart the machine, try to log into the GUI and when it fails switch to a TTY and cat /var/log/syslog | pastebinit and cat /var/log/auth.log | pastebinit then you can copy/type the adresses here
@Zanna I don't know why exactly I don't like sweet potatoes, but I have this weird rule about sweet and salted food. I don't like mixing them, like sweet pizza, chocolate croissant. Maybe my head thinks potatoes are supposed to be salted and I dislike them being sweet lol
I hang out in the Downboat for moderation-related stuff on Ask Ubuntu, the Island for anything bailed from the boat or off topic in the boat (usually overly long technical discussion not directly related to moderation, but it could be anything!)
When running some tests, I need to run a series of commands. It would be extremely useful to me, and save me a lot of time, if there was a way to do all of these things:
Run the command I need to run
Redirect all the output from the command to a specified file
Include the original command in th...
@Zanna cool, might show up someday to check the chatroom then! But I'm finding it hard to keep really active on any room, my free time has been a bit narrowed last couple weeks
I'm a bit lost here right now, maybe you write a comprehensive question on Ask Ubuntu and include the logs and so on into it (you can skip the log nuke commands i posted earlier)
Thanks! It's always pleasant talking to you too :) It's being alright to have a tighter schedule, considering I'm trying to explore some new stuff work related. As long as there's always time for surfing it's all good!
@Zanna On second thought “both” is a really bad name for a function: The function name should describe its action as clear as possible. I suggest rather “commandpaste”, “fullpaste” or (if you find it useful enough to make it the default) just “paste”.
@dessert indeed :) and people can vote however they want. But insofar as there is a way we are supposed to vote, I think we are supposed to upvote useful posts, so I wouldn't want to set a (IMHO) bad example by appearing not to bother to upvote useful posts. If that makes any sense
I am currently having trouble setting up some keyboard shortcuts, specifically the 'super' key.
I am using Linux Mint Mate 18.2 and when used on its own the super key opens my menu bar. Here I can search for apps, shutdown, etc. However I wish to use my super key for other shortcuts but none s...
For the moment, each time I restart my computer and login, I need to run
sudo su
echo -e "nameserver 8.8.8.8\nnameserver 8.8.4.4" > /etc/resolv.conf
service networking restart
To make a long story short, yesterday my internet connection worked perfectly fine. This morning I wasn't able to loa...
I bought this wireless network interface card for my new Ubuntu powered server, and it works fine with by Windows 10 laptop.
However, It isn't being picked up as a wireless interface card on my Ubuntu server.
Here is the output of sudo dmesg, after plugging it in:
[ 653.209304] usb 2-1.4: new...
I've noticed that unlike most logs, /var/log/auth.log isn't world-readable. What sensitive data is logged to auth.log that would make it have these more-restricted permissions? (I'm trying to determine if making it world-readable is safe). This is on Ubuntu 14.
I'd like to edit my .bashrc so that every command executed on the shell is piped to something, for example:
$ sudo apt update
_________________
< sudo apt update >
-----------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
I hav...
Trying to run
RUN chsh -s /bin/bash www-data
(dockerfile) i tried to change it to /bin/zsh but still doesn't work. Docker file is too long, there is the offical repository with the file https://hub.docker.com/r/alexcheng/magento2/~/dockerfile/
Result :
Password: chsh: PAM: Authentication ...
I can't start nginx for some reason;
I have done the following
The server is opensuse
Installed http://nginx.org/download/nginx-1.0.5.tar.gz
extracted the folder
run ./configure
make
make install
the nginx have been extracted to
/usr/local/nginx/sbin
where I can see the nginx..
But when I ...
When running some tests, I need to run a series of commands. It would be extremely useful to me, and save me a lot of time, if there was a way to do all of these things:
Run the command I need to run
Redirect all the output from the command to a specified file
Include the original command in th...
I am currently having trouble setting up some keyboard shortcuts, specifically the 'super' key.
I am using Linux Mint Mate 18.2 and when used on its own the super key opens my menu bar. Here I can search for apps, shutdown, etc. However I wish to use my super key for other shortcuts but none s...
