Ask Ubuntu General Room

11:05 AM

You know it really gets on my nerves that you can't VLQ questions and answers over 1 week old

In this case I think the question should be edited rather than closed as dupe of that one - the OP wanted someone to tell him how to install the latest version of poppler askubuntu.com/review/close/610393

I should know, because I had hell with it

he sent me a sample (password protected pdf he could not open)

and I had the same issue

so I compiled poppler, then built evince against it, and the problem was fixed

but then OP told me that he switched to MATE

I thought oh what the hell, and installed MATE

compiled poppler again, and managed to compile atril (MATE fork of evince) against that, only by making a really filthy hack of the configure.ac

jokerdino

compiling from source should be the one answer I hate telling to people.

Zanna

I couldn't possibly post it, and the OP didn't want to do it, they said "oh I'll just run windows in a VM"

I don't blame them, it was a PITA of the highest order

anyway it worked, I could open the damn pdf after all that hahaha

jokerdino

Poppler v0.41 is in a PPA.

Zanna

that's cool, but I believe you have to build your pdf viewer against it, or it won't make any difference (that's what I read)

I'm probably wrong though

jokerdino

11:11 AM

There must be a better answer than compiling from source. If you could probably BFS without issues, then PPAs should be available somewhere.

Zanna

:(

jokerdino

@Zanna I edited the title and kicked it out of the queue but I am not satisfied with the solution.

Anwar

what was That pdf? I think evince in 16.04 can open pdf with password!

but if there are no solution, compiling is only way I think @jokerdino

jokerdino

and that question is also a perfect example of x-y problem.

Anwar

agreed

Zanna

11:23 AM

yes indeed it is

anyway, maybe that guy had special pdfs but I couldn't open them until doing all that

Byte Commander

x-y problem?

Zanna

where you ask about a y but actually what you want to know is x (because you think y is the solution but you don't understand it)

Anwar

@Zanna you should have included the dependencies in your answer imo

jokerdino

@ByteCommander when you want to marry X but married Y instead.

Zanna

jokerdino is probably finding the metapost for you right now...

Byte Commander

11:24 AM

Aha. Learned something.

Zanna

@Anwar the dependencies are surely in my answer?

jokerdino

No I am not.

Zanna

heh I better do it then ^_^

Anwar

i mean things-you-need part

jokerdino

xyproblem.info

Anwar

11:25 AM

when you want to solve problem X with using Y, then you're asking how you can solve Y

Zanna

let me see I haven't looked at that answer for a while

Anwar

I need to test first. I think, i had some pdf that evince from 14.04 can't open.

Zanna

oh I see - well I did include the dependencies I found @Anwar they are at the top, I added that in case I had missed something

jokerdino

925

Q: What is the XY problem?

What is the XY problem? When asking questions, how do I recognize when I'm falling into it? How do I avoid it? Return to FAQ index

Zanna

because OP might not have had same set up as me

Anwar

11:28 AM

@Zanna oh! I missed that one. quickly read it.

Zanna

I'll edit that part though just for clarity

Anwar

hmm... evince from 16.04 can't open passworded pdf. just found one

Zanna

obvs it would be a poor answer if I didn't give the dependencies at all hahaha

jokerdino

How to open password protected pdf --> How to install latest version poppler.

Anwar

nah. I'll give them a better answer

jokerdino

11:29 AM

MFW latest poppler and evince doesn't open pw-protected pdf.

You remove a lot of chat messages, which I would otherwise have no intention of reading :/

Zanna

@Anwar you are making a better answer? :)

Byte Commander

Curious dino :D

Anwar

@jokerdino ha ha

jokerdino

Curiosity killed the dino.

SmokeDetector

[ SmokeDetector | MS ] Bad keyword in answer: Kernel update gets stuck (Ubuntu 16.04, Kernel 4.4.0-22) by Morgan Cox on askubuntu.com

Anwar

11:35 AM

the other day I said not to read the messages for same reason :D

jokerdino

@SmokeDetector "tech support"

Anwar

@Zanna nah. just suggested an alternative . and i think it is better.

I just tested it. It opens without any complain

Zanna

I upvoted it already @Anwar (hope it works in MATE - then OP can accept your answer, compiling Evince does NOT work in MATE and compiling Atril does work)

jokerdino

Hmm

Anwar

Test it. Foxit is excellent

jokerdino

11:37 AM

Sounds too similar to that thing.

Zanna

* compiling Atril does work but I can't do it in a way I feel comfortable posting an answer about

Anwar

I'll be happy with just 1-2 votes :)

@jokerdino can mods delete close votes on a question?

jokerdino

nope

we can close/reopen though

Zanna

leave a comment for close-voters @Anwar

Anwar

that explains why there were still 3 votes

I retracted mine

jokerdino

11:42 AM

It is no longer in the close vote queue.

Anwar

how long is the queue normally?

jokerdino

Not sure about that but I kicked it out of the queue.

Zanna

Now I could simplify my convoluted answer a bit since the title got fixed

:)

maybe the comments need cleaning up...

Anwar

may be I'll use your answer to get evince open passworded pdfs. foxit is a bit slow :)

mods can clean comments

Zanna

tell me if you find any more deps

(if you do use it)

Anwar

11:48 AM

ok. I'll do if i compile

Byte Commander

~~test~~

Aha.

Zanna

~~test~~

2

hehehe

awww have to go to work :(

jokerdino

Like that ever prevented you from lurking here.

But :( for work anyway.

Takkat

To go to work does not necessarily mean to do that work.

jokerdino

I like this line of argument.

Takkat

12:00 PM

<-- is at work at them moment.

Zanna

@Takkat depends on the job... the work I am going to involves sitting with a 10 year old who lies compulsively and helping her to do maths & verbal reasoning problems...

she will notice if I stop hehehe

Takkat

@Zanna ouch - not much freedom on your side.

Zanna

when i say lie compulsively, I mean she insists that her mum has a 30 year old laptop and 30 year old smartphone

Takkat

lol

Zanna

like, Ella, i know you are lying, because I got my first computer 25 years ago, and its programs were on casette tapes

Anwar

12:02 PM

and her mother is 28 years old?

Takkat

yeah, and the screen was not black and white but amber instead.

jokerdino

@Anwar too young

Anwar

<s>because it was a lie</s>

jokerdino

The cake was a lie.

Anwar

^what's the problem there

jokerdino

12:05 PM

you need three dashes.

thank you!

---3--- 3

~~jdlfjldsf~~

chat.stackexchange.com/faq bottom right where it says FAQ

Zanna

hehe

see you later with new lies by Ella

Takkat

12:06 PM

have fun

jokerdino

Ella is she in French, isn't it?

Anwar

bbl

jokerdino

nvr mind, I confuse elle with ella.

But ella in Spanish is she. O_O

Takkat

Elle in German is a bone of your arm.

like from ellbow (same word)

jokerdino

That makes sense.

Zanna

12:11 PM

ooh shiny new kernel ^_^

I wonder what shiny new bugs it will bring to AU

Byte Commander

12:43 PM

@Zanna you mean 4.4.0-36 ?

I think one change is that it adds support for Intel Kabylake processors...

Because I got another warning about potentially missing driver modules.

Byte Commander

12:56 PM

Holy cow, what a wall of text... Close as too broad or whatever you wish: askubuntu.com/q/818662/367990

Zanna

Yes I mean that one, not shiny shiny new new Arch kernel kinda new

Byte Commander

^__^

Zanna

What time is it in London actually ? My phone is wrong, room timestamp is not the one I want to see either >_<

I can't tell exactly how late I am!

Byte Commander

In Germany it's 15:05, so GB should have 14:05, I think...

Apropos shiny, a Firefox update is coming in...

Unpacking firefox (49.0~b8+build1-0ubuntu0.16.04.1) over (49.0~b7+build1-0ubuntu0.16.04.1) ...

Ubuntu Questions on U&L

1:15 PM

0

Q: Why does Boinc Manager behave differently than all other windows?

My laptop is running a standard Ubuntu MATE 14.04 (obsolete, I know, but it's for work so we will upgrade "later"). I've installed Boinc as per the standard instructions, and it's chugging along fine with my SETI account. But the Boinc Manager window behaves oddly. Whenever I merely hover my c...

ubuntu window-manager mate

jokerdino

1:29 PM

@Zanna 229PM

Ubuntu Questions on U&L

-2

Q: I am having a problem using rsync

I need to use rsync to backup all files of my linux ubuntu machine Can someone help me. Using SystemRescueCd

ubuntu backup

Ask Ubuntu Meta

0

Q: Why answered questions reappear on the main page

I always wondered why are the answered questions reappear over the main page. I do know that we can filter question with given options, but this question was always on my mind. Example; How do I enable fancy apt colours and progress bars? I'm pretty sure there are valid reasons but all I coul...

discussion

AzkerM

ouch! didn't knew meta stuffs are posted on the chat..

:D

0

Q: Send and receive files via lan

So I got an Kali linux machine and a Ubuntu machine, I want to send files from Kali to Ubuntu via lan if it is posible i wanna do it with any native program Hope someone can help me ^^

files lan kali

Zanna

Thanks @jokerdino :) reality restored

AzkerM

Guys! how do we treat such a post?

jokerdino

1:35 PM

@AzkerM did you figure the answer yet? Whenever a post is edited or answered, it gets bumped to the front page.

Anwar

back

AzkerM

@jokerdino no really...

On the second link, even though OP's question is sending files from Kali to Ubuntu.

Not sure why a close flat to the question

jokerdino

@AzkerM Click the 'today' next to active in the right hand top side of a question. It will redirect you to the latest activity in the question.

@AzkerM maybe because OP is using Kali.

Anwar

Seems my multi DE setup's unity has screwed up. No notifications are appearing on top panel

Rinzwind

@jokerdino @ByteCommander is being difficult :=P

Anwar

1:39 PM

@AzkerM you mean close vote?

Rinzwind

BOXY!

cl-netbox

Hello ! :)

RINZY ! :)

jokerdino

@Rinzwind links?

Rinzwind

@Rinzwind I have an SSD, but 24 seconds (if systemd-analyze is correct: Startup finished in 4.130s (firmware) + 3.107s (loader) + 9.403s (kernel) + 10.658s (userspace) = 27.299s is still not fast enough >:D Firmware init, GRUB menu and entering password at the login screen still consume too much time for impatient me. — Byte Commander 3 mins ago

>:)

jokerdino

lol

Rinzwind

1:40 PM

:D

AzkerM

@Anwar Yes

Rinzwind

24 seconds with an ssd .... somebody probably sold him an old hdd as an ssd :P

Anwar

I voted it to close for the reason jokerdino said

AzkerM

Well, just wanted to be clear on that.

Byte Commander

@Rinzwind Around 500 MB/s read speed...

bytecommander@BC-AlkaliMetal:~$ sudo hdparm -t /dev/sdb

/dev/sdb:
 Timing buffered disk reads: 1492 MB in  3.00 seconds = 496.73 MB/sec
bytecommander@BC-AlkaliMetal:~$ sudo hdparm -T /dev/sdb

/dev/sdb:
 Timing cached reads:   9828 MB in  2.00 seconds = 4916.97 MB/sec

It's a LITEON CV1-8B128

@Rinzwind What read speeds does your SSD have then?

Other than that, this question is intended to be applicable to a wider audience. And even the fastest SSD does not save the time spent in GRUB to select an OS and the time in the login screen to enter a password.

AzkerM

1:56 PM

@jokerdino are you referring to the main page? I don't see a 'today' notation though! o_O

jokerdino

@AzkerM the post you saw in the front page

AzkerM

@jokerdino Alright! spotted it. I was actually looking at the front page. So whenever there's a new change/modification to a question regardless of their state, it gets bumped on to the main page, is that what you're trying to say?

jokerdino

@AzkerM yes!

AzkerM

@jokerdino okay. guess that clears out.

Byte Commander

User asked exactly same question twice: askubuntu.com/q/818688/367990

(and it's likely about Kali, so off-topic anyway)

Rinzwind

2:27 PM

@ByteCommander 1 sec. ill check if I can find it

@ByteCommander those 2 are settings you just set once :-P

Byte Commander

But I don't want them persistent.

I want to be able to pick an OS normally and I want to have a login password, unless I click on "Quick Reboot"

Rinzwind

probably Maximale schrijfsnelheid
520 MB/s
Maximale leessnelheid
540 MB/s

that's write + read ;-)

Byte Commander

schrijfsnelwhat?

Ah.

Dutch still reads like funny German. Just had to read it a few more times.

Zanna

Upgraded my phone OS and everything broke haha

Now I don't know what time it is, my messages have reordered themselves into an entirely random arrangement and all the apps I installed have bailed

jokerdino

SNAFU

Byte Commander

2:40 PM

I'm really unsure about this review: askubuntu.com/review/low-quality-posts/610663

Anwar

@ByteCommander should I vote your question to close as being too broad ? :)

Android Dev

Off topic: askubuntu.com/questions/818699/additional-memory

0

Q: Additional Memory?

I am trying to install 16.04 LTS on an old Dell currently running 12.04 and Windows XP. I was told to upgrade memory to 2 Gigs and am wondering if new memory sticks should go in slots marked #1 and old memory should be moved back to slots marked #2 for better performance. On re-installation I pla...

partitioning system-installation ram

Anwar

Extra Fast seems too subjective

Ubuntu Questions on U&L

0

Q: OOM situations handled horribly - better to disable swap?

I am running Ubuntu 16.04.1 LTS, with a 4.4.0-36 kernel. I don't think that this matters a lot though, because I've seen terrible kernel behaviour across many distributions/kernel versions. Consider the following starting point: My system has let's say 4GB of memory and a swap partition of 4GB...

ubuntu memory swap out-of-memory

Rinzwind

@ByteCommander the 1st is an option in grub conf. You probably need a "sed" to alter the setting and another to reset it for each shutdown/reboot/etc method. Or 2 conf files that you toggle. Problem: any edit you do requires a sudo update-grub and that is going to take longer than the time you need to wait for that reboot.

Anwar

2:57 PM

what is our policy on exact copy answer from Ubuntu wiki? is that OK?

Rinzwind

@Anwar plain copying is never ok.

Anwar

@Rinzwind look at this. this answer is an exact copy of this community wiki

though they given the link

Rinzwind

its accepted so that's a problem too.
I would have posted the link as a comment :P

Anwar

agreed. that too looks like a problem

anyone knows about the fate of this icon project? askubuntu.com/q/818643/61218

Android Dev

3:19 PM

@Anwar - I just got this popup. ??????????

user136984

@AndroidDev: What is the output of lsb_release -a?

user136984

Which point release of 14.04 are you running?

user136984

If it's not 14.04.5 then that might be the problem.

Mateo

Hit install and cross your fingers ;)

user136984

@Mateo: Oh, I didn't notice that button, but yes, @AndroidDev, you should try the Install... button.

edwinksl

3:27 PM

@AndroidDev just read the wiki linked

Anonymous

Need help -- I opened an image via ImageMagick earlier today. Then everything acted weird so I killed IM altogether. I have even removed it and the packages.

Anonymous

But every so often (few minutes) the image I had opened flashes up on the screen -- not IM but just the image. If I move my mouse or something, then it goes away

Anonymous

Why is this happening??

Anonymous

I have also restarted my VM 3 times, and it happens

Anonymous

This is Xubuntu 15.10 as a vm

Android Dev

3:43 PM

@ParanoidPanda paste.ubuntu.com/23112277

@ParanoidPanda I'm scared.

@ParanoidPanda - I've had lots of bad things happen when doing an upgrade.

Anonymous

i am going crazy.

jokerdino

Is that a nice place? I always wanted to go there.

Anwar

@AndroidDev sorry. No idea about it. my suggestion would be just installing

Byte Commander

@Rinzwind isn't there "grub-reboot" which does that job?

Anwar

@Serg Just tested your indicator after fixing the problem with my indicator. It's fantastic i'd say!

user136984

3:47 PM

@AndroidDev: Sounds strange, but I would do the install.

user136984

In fact I would just go into a Terminal and do sudo apt-get update && sudo apt-get dist-upgrade so that you see more of what is being upgraded and happening.

Anonymous

@jokerdino see => chat.stackexchange.com/transcript/message/32006330#32006330

@jokerdino lol :D

15.10 is EOL :D

just a VM though :P

3:49 PM

@onebree hmm looks like some kind of subliminal message from ETs.

Android Dev

@ParanoidPanda - It doesn't seem to show up if I run that command: paste.ubuntu.com/23112294

jokerdino

But frankly, I don't know why it is happening onebree. Very peculiar indeed.

Kaz Wolfe

@Anwar You rang?

James Tobin

@anwar hey!

Anwar

sorry. I was talking about some strange comment made by an answer

user136984

3:53 PM

@AndroidDev: Those are likely to be the packages causing that message.

Anwar

@JamesTobin your problem gone?

user136984

I would just run the upgrade through Terminal, non of those packages look like they could possibly cause any trouble, in fact I think those are mostly major security updates.

James Tobin

@anwar no. I just got back from vacation :)

Kaz Wolfe

yeah, updates pretty rarely break things

Ubuntu Questions on U&L

0

Q: Why my logrotate is not working?

I'm trying to rotate my application's log daily. But for some unknown reason, is not working. If I debug its logrotate definition, it says that it won't rotate it. However, only when I force its rotation it works.. What am I missing here ? logroate definition (/etc/logrotate.d/application) /tmp...

linux ubuntu logs logrotate

Anwar

3:54 PM

good!

Kaz Wolfe

especially kernel upgrades.

James Tobin

I think I'll just migrate my data to another administrator account

Anwar

let's move to the other room

James Tobin

sure.

I dont have the link any more

Anwar

I pinged you

James Tobin

3:57 PM

I didnt get anytihng

Anonymous

@jokerdino OK IDK if I broke the VM or something... I cannot trash it because it is setup to have a working env for work.

James Tobin

oh there I got it

Anonymous

Yo, if I could share my screen right now, you'd see what I mean. It is crazy.

Kaz Wolfe

@onebree Try restarting X?

Anonymous

@KazWolfe How do you do that? And isn't restarting the entire VM enoiugh?

Kaz Wolfe

3:59 PM

that would work

Anonymous

I already restarted the VM 3 times. And one of those times, when it was supposed to show the login screen, it instead showed that trace of an image... Until I clicked or started typing

Anonymous

I have created some artifact or whatever. Great. I broke linux

Kaz Wolfe

try restarting the hypervisor?

Anonymous

What is hypervisor

Anonymous

I am using VirtualBox on a Xubuntu 16 host

grooveplex

4:02 PM

cat words | wc -l | python3 -c 'import sys; print(int(sys.stdin.read())/4)'

the struggle is real

Kaz Wolfe

hypervisor is the program that runs the virtual machinse

Anonymous

Will try

Anonymous

@KazWolfe I just restarted X - still happens

Anonymous

I'm going to take lunch and pray that this fixes itself in an hour

Anwar

@AndroidDev the answer was in dup target link. it's saying the hardware enablement stack is EOL. you should upgrade it. not your Ubuntu. because you're getting security updates for it. That message is one example of security updates

Serg

4:15 PM

@Anwar thank you ! glad you like it. Which one did you test ? the launcher one ?

Anonymous

@serg any advice to my questions above (near where I said I am crazy)

Anonymous

I don't even know how to google this issue. :-(

Zacharee1

@Zanna that site's pretty inactive

Zanna

@onebree it was probably not a good idea to remove ImageMagick - various things depend on it (if I threaten to remove it in MATE apt threatens to remove my desktop entirely)

Anonymous

@Zanna I only needed to install it for one app I work with, but I haven't touched that in months. I will install it again when I fix this

Zanna

4:24 PM

@Zacharee1 yeah well shrug

James Tobin

why when I renamed .local to .local-old does my wine config screw and I cant use my wine programs?

Zanna

Installing it again now might even help @onebree who knows? Sounds like voodoo, anything could happen. Try tapping the shift key while standing on your head ;)

4

Arronical

@onebree do you have a recent snapshot of the VM that you could revert to?

Zanna

Ah a sensible suggestion...

Arronical

Sorry to be boring ;)

Zanna

4:41 PM

I can only approve of helpfulness :)

edwinksl

@Zanna oh finally an accept for you!

Zanna

Hehe yep :) more experienced user clearly

edwinksl

that force_color_prompt question though ._.

Zanna

Hahahaha are there developments ? I haven't looked

Zacharee1

@edwinksl links or it didn't happen

edwinksl

4:56 PM

@Zacharee1 links to what

Zacharee1

force_color

@Seth shame askubuntu.com/review/low-quality-posts/610838

edwinksl

6

Q: Permanently disable color in default terminal

I can't figure out how to disable the colors in the terminal(just the default, gnu it's called?). Been looking for an hour and ran some code that I saw else where. Also tried emacs ~/.bashrc and added a line that was supposed to disable the color, it worked once then I closed the terminal, ls aga...

colors

Zacharee1

:p

Zanna

Nope no change Haha user gone forever, everyone else coming to the question confused

Zacharee1

@edwinksl did that Cyrillic guy just link his answer in the comments? O_O

edwinksl

4:57 PM

@Zacharee1 good catch, i didn't notice that

Zanna

Yep

And it doesn't look simple and elegant to me!

Zacharee1

heheh

Zanna

But I'm biased towards cli solution always

Zacharee1

@Zanna terminal is usually more direct

so their answer may be elegant (meh), but it ain't simple

Zanna

I wonder if the confused person who commented on the Q didn't make it below accepted answer

Zacharee1

5:00 PM

@edwinksl he also replied to you to link his answer below Anwar's o_O

edwinksl

@Zacharee1 he/she is trying really hard to sell his/her answer :/

Zanna

They are really proud of that answer

Zacharee1

wait it's Greek

but it's very obviously Eric

Eric Konstantopoulos

Anonymous

@Arronical TIL you can take snapshots of a VM.

jokerdino

Wow, an answer on AU suggesting the removal of izx PPA.

Zacharee1

5:03 PM

@onebree going, going, gone :p

Zanna

Is this Greek person famous?

Zacharee1

no

Google Translate

@jokerdino wat

Serg

@onebree what is tye question ?

Zanna

@jokerdino is that a downvotable offense?

jokerdino

No, izx is one awesome contributor to Ask Ubuntu.

Zacharee1

5:04 PM

lol askubuntu.com/questions/818751/…

Zanna

I know

Zacharee1

@jokerdino where is this

edwinksl

Last seen Oct 26 '12 at 1:17

been a while

Anonymous

^ @Serg

jokerdino

5:05 PM

@onebree where is that from?

Anonymous

@jokerdino I sent to to someone over slack earlier

jokerdino

It shows your name.

Anonymous

thats fine

Zanna

I think the "inforcer" got a bit carried away on that post @Zacharee1

jokerdino

and your glasses

edwinksl

5:06 PM

@Zacharee1 oh great i get to cast the 5th cv

Anonymous

omg it is happening elsewhere... It may be the host

jokerdino

0

Q: Error Updating: izx/askubuntu/ubuntu xenial Release' does not have a Release file

I am performing an update and its failing on the following: The repository 'http://ppa.launchpad.net/izx/askubuntu/ubuntu xenial Release' does not have a Release file.. Running a local Ubuntu server 16.04

16.04 ppa

Zacharee1

@Zanna I agree with him though :p. OP was being more than a bit dense

@jokerdino gasp @ZANNA

Zanna

Well Imo there's no need to shout :)

Zacharee1

:p

Zanna

5:07 PM

Argh! Exposed!

Zacharee1

@Zanna maybe not. I would've used Bold Italics

Zanna

hides

edwinksl

@Zacharee1 why not caps bold italics

Zanna

Lol

Zacharee1

@edwinksl YOU ASKED FOR IT BUDDY

whew, no Oli

edwinksl

5:08 PM

don't get flagged/banned

jokerdino

pages Oli.

Zacharee1

@edwinksl sez u

@jokerdino nu pls

gtgfn

Anonymous

@jokerdino my name is on twitter and github, which is linked to my prof so I am ok

jokerdino

yeah, I might have even followed you in one of those places. o.O

Serg

@onebree puzzling. I don't know much about imagemagic or xubuntu but it could be that it was set as default app for images ? if so, then it switched to next defaul so it relaunches the image. Also grep through your .local/share/applications , maybe there is a .desktop file which launches it

Anwar

5:12 PM

@Serg launcher saving icon

is there any way to switch profile using keyboard shortcut?

that would be great!

edwinksl

@Zacharee1 i am still pissed

James Tobin

@edwinksl you and your language!

Thomas Ward

randomly spawns

Anonymous

so I think it was my host...

Anonymous

all looks better now

Nathan Osman

5:28 PM

o/

Serg

@Anwar shortcut would require another script. I am planning to add mouse scroll action to it though. So you will be able to hover mouse over indicator and scroll

jokerdino

@onebree Not on Twitter yet..

Anwar

@Serg that's good too!

Thomas Ward

@jokerdino five seconds later...

Zacharee1

5:57 PM

@JamesTobin if that's a bad word to you, you need to get out more

Anwar

...building kdeconnect

Transcript for