Just a message to which I'm going to reply.

@Makyen I've added you to the privilege list for SmokeDetector (SD) here in Charcoal HQ. You should run the !!/amiprivileged command to verify. It would be a good idea to read through the Feedback Guidance, SmokeDetector wiki, and SmokeDetector commands (in particular feedback). ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ If you haven't already read it, there's an Introduction to Participating in Charcoal. ⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ You may also want to look at the userscripts we have available (GitHub), as they can be quite helpful, depending on how you want to participate. For viewing, feedback, and flagging in chat, I find FIRE and AIM to be the ones I use the most. ⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ For flagging through the userscripts, your metasmoke account needs to be write authenticated with SE, which, if you haven't already done so, can be done from the authentication page and doesn't require you to also sign up for autoflagging, although authenticating is also a required step for signing up for autoflagging. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ In addition, to enable manual flagging through the userscripts, the checkbox that says "Allow metasmoke to raise flags for my account" on this page also needs to be checked. If you have no entries in the "ID Site Count Flags Used Today" list at the bottom of that page, then autoflagging will still not be enabled, but manual flagging through the userscripts will be enabled. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Just so you know, we normally tell people when they are getting privileges that we practice the "ton of bricks" discipline method here: If you mess-up sufficiently, or consistently, we come down like a ton of bricks :-). ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ To quote ArtOfCode: "TL;DR: ton-of-bricks is mostly to say that we almost never need to enforce things because things enforce themselves through having a good community here. If it gets to the point that someone's enforcing something, something's gone badly wrong." ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Quoting NobodyNada [with a bit added]: "Note that 'mess up' doesn't mean 'make a mistake', it means 'do something intentionally irresponsible/antagonistic' [or consistently do something wrong and not change when it's, repeatedly, pointed out]. Charcoalers are generally quite friendly, forgiving of mistakes, and willing to help each other learn. We recognize that our systems and policies have quite the learning curve -- so don't be afraid of us :)" So, let's try a brief amount of other Markdown just in case it works.

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb

Max length is 500

500 is allowed

․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

500 unicode is allowed

test via fetch

cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc

․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Seems UTF-16 is used internally too

︌︍︎️︐︑︒︓︔︕︖︗︘︙︚︛︜︝︞︟︧︨︩︪︫︬︭︠︡︢︣︤︥︦︮︯︰︱︲︳︴︵︶︷︸︹︺︻︼︽︾︿﹀﹁﹂﹃﹄﹅﹆﹇﹈﹉﹊﹋﹌﹍﹎﹏﹐﹑﹒﹓﹔﹕﹖﹗﹘﹙﹚﹛﹜﹝﹞﹟﹠﹡﹢﹣﹤﹥﹦﹧﹨﹩﹪﹫﹬﹭﹮﹯ﹰﹱﹲﹳﹴ﹵ﹶﹷﹸﹹﹺﹻﹼﹽﹾﹿﺀﺁﺂﺃﺄﺅﺆﺇﺈﺉﺊﺋﺌﺍﺎﺏﺐﺑﺒﺓﺔﺕﺖﺗﺘﺙﺚﺛﺜﺝﺞﺟﺠﺡﺢﺣﺤﺥﺦﺧﺨﺩﺪﺫﺬﺭﺮﺯﺰﺱﺲﺳﺴﺵﺶﺷﺸﺹﺺﺻﺼﺽﺾﺿﻀﻁﻂﻃﻄﻅﻆﻇﻈﻉﻊﻋﻌﻍﻎﻏﻐﻑﻒﻓﻔﻕﻖﻗﻘﻙﻚﻛﻜﻝﻞﻟﻠﻡﻢﻣﻤﻥﻦﻧﻨﻩﻪﻫﻬﻭﻮﻯﻰﻱﻲﻳﻴﻵﻶﻷﻸﻹﻺﻻﻼ﻽﻾＀！＂＃＄％＆＇（）＊＋，－．／０１２３４５６７８９：；＜＝＞？＠ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ［＼］＾＿｀ａｂｃｄｅｆｇｈｉｊｋｌｍｎｏｐｑｒｓｔｕｖｗｘｙｚ｛｜｝～｟｠｡｢｣､･ｦｧｨｩｪｫｬｭｮｯｰｱｲｳｴｵｶｷｸｹｺｻｼｽｾｿﾀﾁﾂﾃﾄﾅﾆﾇﾈﾉﾊﾋﾌﾍﾎﾏﾐﾑﾒﾓﾔﾕﾖﾗﾘﾙﾚﾛﾜﾝﾞﾟﾠﾡﾢﾣﾤﾥﾦﾧﾨﾩﾪﾫﾬﾭﾮﾯﾰﾱﾲﾳﾴﾵﾶﾷﾸﾹﾺﾻﾼﾽﾾ﾿￀￁ￂￃￄￅￆￇ￈￉ￊￋￌￍￎￏ￐￑ￒￓￔￕￖￗ￘￙ￚￛￜ￝￞￟￠￡￢￣￤￥￦￧￨￩￪￫￬￭￮￯￰￱￲￳￴￵￶￷￸�￾￿

��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������

NULLs: !!!

NULLs: !!!

Okay, so it supports arbitrary UTF-16, including nulls

This means you get exactly 1 KB of data in one message, ignoring newlines

Although actually...you'd probably want to avoid certain characters to avoid markdown runing your day

bold and brash

a c

<div>

Dang, what is the potato limit? I'm at 2**16 in a single message

Okay, so the limit is somewhere between 2 ** 18 and 2 ** 20

Although wait, I've just realized. Timeouts might be the cause, not potato max counts

I think I'm going to go with non-newline stuff. Although you can fit a ton more data, I think the just-under-1000-byte limitation will be more fun to work with