« first day (2086 days earlier)      last day (1094 days later) » 

Duga
Duga
12:00 AM
RELOAD!
[Minesweeper] Games Played: 112, Bombs Used: 78, Moves Performed: 16339, New Users: 16
RELOAD!
[rubberduck-vba/Rubberduck] 1 issues closed. 1 issues opened. 24 issue comments
 
Duga
Duga
12:17 AM
[rubberduck-vba/Rubberduck] build for commit b6efda0c on unknown branch: Coverage not affected.
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5343?src=pr&el=h1) Report
> :exclamation: No coverage uploaded for pull request base (`next@1b69ca4`). [Click here to learn what that means](https://docs.codecov.io/docs/error-reference#section-missing-base-commit).
> The diff coverage is `n/a`.


```diff
@@ Coverage Diff @@
## next #5343 +/- ##
=======================================
Coverage ? 61.33%
=================
 
IvenBach
IvenBach
@Vogel612 github.com/rubberduck-vba/Rubberduck/pull/… EOL (End of Line) vs EOF (End of File)?
 
Vogel612
Vogel612
yeap
 
IvenBach
IvenBach
Bear with me but what is EOF exactly?
 
Vogel612
Vogel612
it#s ... complicated
 
IvenBach
IvenBach
Naturally... Got a laymans hand wavey example?
 
Vogel612
Vogel612
12:31 AM
sometimes it's a character, sometimes it's a special "character" that only appears when you actually read a file
 
IvenBach
IvenBach
I'm already reading en.wikipedia.org/wiki/End-of-file. Usually I don't understand it enough in the abstract presentation.
 
Vogel612
Vogel612
it's a bit like when you iterate over a record set in VBA and you have finished reading the last result, when you try to advance the cursor you get an "EOF"
 
Duga
Duga
[rubberduck-vba/Rubberduck] build for commit c389d78d on unknown branch: AppVeyor build failed
BUILD FAILURE!
 
IvenBach
IvenBach
EOF = You've hit the end of the known universe (byte stream). After that point it's mumble-mumble-shrug undefined?
 
Vogel612
Vogel612
kinda
trying to read after hitting EOF will usually get you another EOF
over and over
 
IvenBach
IvenBach
12:38 AM
mkay. That's a valid enough answer me currently.
@Duga Hrm... Export command is invoked.
 
Vogel612
Vogel612
I think the mock setup is not correct anymore
instead you got IVBComponent.ExportAsSourceFile("C:\Users\Rubberduck\Desktop", False, True)
I don't know why the StdModule1.bas is not in the path there, but .... whatever
anyways: Bedtime :)
Toodles
 
IvenBach
IvenBach
Night. Thanks for the review. 
var path = System.IO.Path.GetDirectoryName(dialog.FileName);
component.ExportAsSourceFile(path);
That looks to be where the difference is coming from. Specifically github.com/IvenBach/Rubberduck/blob/….
 
this
this
I don't think the problem is with the code, but rather the test
 
IvenBach
IvenBach
Oh... path shouldn't be the path and filename combined.
 
Duga
Duga
[rubberduck-vba/Rubberduck] build for commit 6beba450 on unknown branch: AppVeyor build succeeded
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5342?src=pr&el=h1) Report
> :exclamation: No coverage uploaded for pull request base (`next@a08e65b`). [Click here to learn what that means](https://docs.codecov.io/docs/error-reference#section-missing-base-commit).
> The diff coverage is `70.79%`.


```diff
@@ Coverage Diff @@
## next #5342 +/- ##
======================================
Coverage ? 61.6%
==================
 
IvenBach
IvenBach
12:53 AM
I don't know when I'm going to have enough time to make time to read my unit test books...
 
this
this
You have explorer.VbComponent.Verify(c => c.Export(path), Times.Once);
If I understood from you & Vogel, you had changed from Export to ExportAsSourceFile
Is that the case?
 
IvenBach
IvenBach
7 mins ago, by IvenBach 
var path = System.IO.Path.GetDirectoryName(dialog.FileName);
component.ExportAsSourceFile(path);
Correct
:click: Oh... Export is never invoked. Now it's ExportAsSourceFile. I have to update the test to reflect this change.
A #BrainTickle says I need a public void ExecuteExportAsSourceFile() on the MockedCodeExplorer now.
Class time though...</iven>
 
 
2 hours later…
this
this
3:26 AM
It seems that when dynamically invoked, WPF will not like syntaxes like xmlns:converters="clr-namespace:Rubberduck.UI.Converters" - it will throw "halp can't find file" exception.
to fix that, we have use to xmlns:converters="clr-namespace:Rubberduck.UI.Converters;assembly=Rubberduck.Core", even though it's supposedly redundant...
 
this
this
3:42 AM
At least I finally have a working implementation finally. Now the next part is figuring what system colors to use for one of our bajillion brushes....
 
 
4 hours later…
IvenBach
IvenBach
7:31 AM
DK at its finest: ... surveyed 100K people about their skill level with Excel.
 
 
3 hours later…
Duga
Duga
10:58 AM
 
 
2 hours later…
Duga
Duga
12:41 PM
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5387?src=pr&el=h1) Report
> Merging [#5387](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5387?src=pr&el=desc) into [next](https://codecov.io/gh/rubberduck-vba/Rubberduck/commit/dc732efef8fb3a7ced16e4af16e3257ed10fea11?src=pr&el=desc) will **increase** coverage by `0.17%`.
> The diff coverage is `86.58%`.


```diff
@@ Coverage Diff @@
## next #5387 +/- ##
=========================
> Since this PR conflicts heavily with PR #5357, I have added the implementation inside the `ExtractInterfaceRefactoringAction` to this PR, as agreed in chat.
The changes the `ExtractInterfaceModel` are taken from the other PR, except for the default value of `InterfaceInstancing`; I chose to default to the value for the implementing class instead of always defaulting to `Public`. This should be compatible with the UI enhancements in PR #5357.
 
FreeMan
FreeMan
@mansellan @this Thanks for the ODE info. (Was away in training all yesterday.) Obviously, sharing your license key is bad. Can you share the appropriate location in the registry to place the license key so others who have once can put their own there?
 
Duga
Duga
1:00 PM
[rubberduck-vba/Rubberduck] build for commit c4ad4c82 on unknown branch: AppVeyor build succeeded
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5387?src=pr&el=h1) Report
> Merging [#5387](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5387?src=pr&el=desc) into [next](https://codecov.io/gh/rubberduck-vba/Rubberduck/commit/dc732efef8fb3a7ced16e4af16e3257ed10fea11?src=pr&el=desc) will **increase** coverage by `0.19%`.
> The diff coverage is `86.96%`.


```diff
@@ Coverage Diff @@
## next #5387 +/- ##
=========================
[rubberduck-vba/Rubberduck] build for commit c4ad4c82 on unknown branch: 86.96% of diff hit (target 60%)
[rubberduck-vba/Rubberduck] build for commit c4ad4c82 on unknown branch: 61.79% (target 0%)
 
Duga
Duga
1:25 PM
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5390?src=pr&el=h1) Report
> Merging [#5390](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5390?src=pr&el=desc) into [next](https://codecov.io/gh/rubberduck-vba/Rubberduck/commit/dc732efef8fb3a7ced16e4af16e3257ed10fea11?src=pr&el=desc) will **decrease** coverage by `0.07%`.
> The diff coverage is `30.12%`.


```diff
@@ Coverage Diff @@
## next #5390 +/- ##
=========================
[rubberduck-vba/Rubberduck] build for commit 433a57b3 on unknown branch: 30.12% of diff hit (target 60%)
 
FreeMan
FreeMan
Can I do SELECT ? FROM <table> WHERE <knownColumn> = ? in an ODBC query? i.e. parameterize the column I want to select.
 
Duga
Duga
1:44 PM
[rubberduck-vba/Rubberduck] build for commit e9937a2a on unknown branch: AppVeyor build succeeded
[rubberduck-vba/Rubberduck] build for commit e9937a2a on unknown branch: 61.53% (target 0.00%)
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5390?src=pr&el=h1) Report
> Merging [#5390](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5390?src=pr&el=desc) into [next](https://codecov.io/gh/rubberduck-vba/Rubberduck/commit/dc732efef8fb3a7ced16e4af16e3257ed10fea11&el=desc) will **decrease** coverage by `0.07%`.
> The diff coverage is `n/a`.


```diff
@@ Coverage Diff @@
## next #5390 +/- ##
=================================
 
M.Doerner
M.Doerner
2:11 PM
@BZngr You might want to refresh the tab you use to look at the PR.
The code you comment is outdated and the names are different now.
 
Duga
Duga
 
this
this
@M.Doerner @BZngr may be that this is commenting on a earlier commit, rather than the PR. I think that still views the outdated changes.
 
Duga
Duga
2:27 PM
 
Duga
Duga
2:37 PM
 
this
this
I have a usability question. Suppose there's a parameter that will adjust a color by making it darker or lighter. Would you rather input it as a valid range between -1 to 1 or 0 to 2? Say that you want to make a color 10% darker, you'd use -0.1 in former but 0.90 in latter.
 
BZngr
BZngr
@M.Doerner Sorry...I'll refresh more frequently.
 
this
this
It also bothers me that the ends don't work the same way. If you choose 100% darker, you will get black every time, not a color that's actually twice darker than the original color. OTOH, if you choose 100% lighter, you don't get white every time; for a dark enough color, you might only get a color that's twice as bright.
Thinking about it some more, I guess to get the same behavior for both ends, the range would have to be actually from 0.5 to 2.
 
FreeMan
FreeMan
@this I'd go with -1 to +1 with 0 being 'no change'. 0.1 = -90% while 1.9 = 190% is... confusing
 
this
this
That's what I thought, too.
It's actually implemented as basically 0 to 2 but I do a one-off
However, I now think that the -1 should map to 0.5 internally to behave the same way as the 1 -> 2
 
FreeMan
FreeMan
2:46 PM
@this I think you may be adjusting the wrong thing if that's what you're getting. However, if you look at the color choosers, they're always white at the top, degrees of the selected color in the middle and black at the bottom
the standard Excel color chooser box:
 
this
this
I will double check but it's not actually linear
 
FreeMan
FreeMan
It's got something to do with the way color "math" works...
 
this
this
Yeah but see, to adjust the colors, I use HSL, not RGB
(tyring to find the image)
That is the path the conversion takes
you give me a RGB, I convert to HLS, adjust the L accordingly, convert it back to RGB and gvie you the new color.
You also can see that the L is a %, so the parameter would adjust the L by yet another %. Not confusing at all!
meaning, 0.5 * 2 should yield 1, which is indeed 100% brighter. However, 0.5 * 0 becomes 0 which is 100% darker but only in this case. 0.9 * 0 is not 100% darker. It would be actually be 0.9 * 0.5 = 0.45
wait, that didn't follow. a 100% darker of 0.5 should be 0.25, not 0.
 
M.Doerner
M.Doerner
I think that the notion of making something x% darker does not make a lot of sense.
 
this
this
but that is a common thing to do; we want to adjust color shade either way.
 
M.Doerner
M.Doerner
3:01 PM
You would especially not multiply the lightness with a factor.
The base point for lightness is 50%.
 
FreeMan
FreeMan
again referencing Excel, Before:
 
this
this
Correct. That would be the most colorful.
 
FreeMan
FreeMan
after
 
this
this
However, the goal here is to take a color of any shade and adjust that by a %
 
FreeMan
FreeMan
so I think that's to be expected
 
Duga
Duga
3:03 PM
 
this
this
@FreeMan hm. I don't think HSL is normally expressed in 0 to 255.
 
M.Doerner
M.Doerner
You can add to lightness, but multiplying seems a bit strange.
 
FreeMan
FreeMan
Feb 12 at 14:02, by FreeMan
Jan 31 at 19:21, by FreeMan
yesterday, by FreeMan
23 hours ago, by FreeMan
2 hours ago, by FreeMan
2 mins ago, by this
#BlameMicrosoft
 
this
this
@M.Doerner the value is a percentage and I would not know what a shade of color is. If I add, that would be a constant step, rather than saying this color is % lighter/shader compared to the original color.
It's supposed to be relative to the input color, not the ends.
 
FreeMan
FreeMan
@M.Doerner Colin Chapman said you should add lightness (scroll down a smidge), I'm sure he would have loved to multiply lightness!
 
SmileyFtW
SmileyFtW
3:08 PM
3 workbooks: personal, a small add-in, and the main project; 4, 4, 161 tests respectively. 12 minutes to run all tests. Is that a reasonable time on a fresh test run?
 
Vogel612
Vogel612
@this H is [0,360), S and L are [0,1] / [0, 255]
for S 0 the H is basically undefined, though
 
this
this
I guess [0,1] and [0,255] are just 2 different ranges, like Celsius / Fahrenheit.
That said, the implementation I'm using uses [0,1]
 
Vogel612
Vogel612
3:24 PM
[0,1] is easier for conversion purposes, because it's already "normalized"
 
this
this
Yeah.
This was the idea I was trying to approximate:
 
KySoto
KySoto
hi guys
access is being stupid af
:)
im parsing a text file to try to tableize it
and access is giving me this crap that 'the record is too large' when im just shoving a the name of the field as its value in a "make table" query 
select
    'id'                  as ID
  , 'auto'                as [auto]
  , 'abillist'            as [abillist]
  , 'heroabillist'        as [heroabillist]
  , 'level'               as [level]
  , 'type'                as [type]
  , 'goldcost'            as [goldcost]
  , 'lumbercost'          as [lumbercost]
  , 'goldrep'             as [goldrep]
  , 'lumberrep'           as [lumberrep]
  , 'bountydice'          as [bountydice]
  , 'bountysides'         as [bountysides]
  , 'bountyplus'          as [bountyplus]
 
this
this
A record can't be bigger than the page it's stored in.
Access uses 4KB pages. Therefore, you can only store ~4KB inline.
If you use Memo / Long Text, it's now a LOB not inline and thus the limitation doesn't apply.
 
KySoto
KySoto
-------_________---------
thanks
 
this
this
3:39 PM
I have to admit, though. I didn't expect that:
 
FreeMan
FreeMan
That really looks like it wants to be multiple tables. weap1 and weap2. If there's no weap2 you're wasting space unnecessarily, if there's aweap3 you can't store it. Same for shadow*, *dmg, etc
 
this
this
That'd be true; I assumed he needs to import it into denormalized table for further processing.
 
FreeMan
FreeMan
yeah, I saw a list of columns with a vertical scroll bar and started getting chills...
 
this
this
@this TBH, I'd have thunk that 100% of a value should double the original value, not the maximum
 
Cyril
Cyril
@this Have to ask, which part wasn't expected? That the ratio of colors approaches 1, or the values themselves approach 0, as you move to darker colors?
and you answered that exactly before i asked... lol
 
this
this
3:43 PM
yeah, I guess the critical part is defining what you mean by the phrase 25% lighter
I always thought of it as "relative to the original color"
which then follows that 100% is always the double, and -100% is always the half.
 
Cyril
Cyril
the rationale is paired in a combination of math, science, and tom-foolery (i have worked with this exact topic in the past when explaining fluorimetry and explanation of UI for the software on the machine)
 
this
this
Feels like it....
and all I wanted was a simple way to adjust the shade.
 
Cyril
Cyril
without focusing on excitation and emission of particles related to their sensitivity of light, humans need a way to gauge said outputs. Working with a simple (and antiquated) RGB platform, you have each color bound from 0-256, relative to each other to create the entire visible color spectrum.
 
this
this
uh, 0-255. ;-)
 
FreeMan
FreeMan
@Cyril has extra perception - it goes one higher
 
this
this
3:47 PM
LOL
 
Cyril
Cyril
technically rgb(255,255,255) and rgb(0,0,0) should be identical, but because someone thought about what "white" should be, they defaulted rgb(255,255,255) to white and rgb(0,0,0) to black
 
this
this
He must be a bee. They see ultraviolet.
 
FreeMan
FreeMan
a bear with a bee in his bonnet
 
this
this
@Cyril but you do get that in HLS and HLB, I think. They are put in a wheel.
 
Cyril
Cyril
so you need to vary RGB ratios to move between white and black. It's "easier" to get darker than it is to get lighter, due to the upper bound of 255 for r, g, or b.
 
this
this
3:48 PM
which is partially why I have to convert RGB to HLS to calculate the adjustment of lightness, then output the new RGB
 
Cyril
Cyril
and yeah, was going to type 1-256 then was like 'we'll use zero` and didn't fix the 256 lol
@this HLS/HLB?
 
this
this
you can see all different systems there
 
Cyril
Cyril
i'm following you, now
 
this
this
 
Cyril
Cyril
note i mentioned the rgb only was antiquated! lol
 
this
this
3:52 PM
:)
In HLS' model, 0.5 lightness is the most colorful
but I don't particularly care how colorful the input color is. I only want to output a good approximation of a color that's % lighter/shader from that input.
 
Cyril
Cyril
which makes sense for saturation values, as it's another one of those tom-foolery things... (-)100% to (+)100% saturation, the 0.5 saturdation is 0% saturation
essentially the negatives are "taking away" and positives are "adding" from whatever the "true" color is
mean tto right "for saturation and lightness", though was focusing on the saturation aspect for the explanation... the (-)100 to (+)100 applies to each, which doesn't require the RGB/CYM values to change (essentially hue)
@FreeMan just caught that comment when reading up... keep that thing out of my ear!
[removed]
 
FreeMan
FreeMan
4:16 PM
was wondering if this thing was on...
 
KySoto
KySoto
i never knew how the whole hue saturation lightness thing worked
thanks
 
Duga
Duga
4:40 PM
 
Duga
Duga
5:03 PM
 
Cyril
Cyril
5:25 PM
@BigBen waiting to see if that SelpaqM person opens a new question, answer their last one was closed... cus i've got an answer for them ='/ 
guy wanted to print non-contiguous ranges...

Private Sub printToPDF()
    Dim printArea1 As Range
    Set printArea1 = Cells(2, 2)
    Dim printarea2 As Range
    Set printarea2 = Cells(3, 3)
    Dim completePrintRange As Range
    Set completePrintRange = Union(printArea1, printarea2)
    completePrintRange.ExportAsFixedFormat xlTypePDF, "Test", , , , , , True
End Sub
 
BigBen
BigBen
oh yeah
 
Cyril
Cyril
i closed as general software because his question was "these people have problems, what can i do? i could add my macro to the file". his comments gave more info, but wasn't the post
 
Duga
Duga
 
Cyril
Cyril
if you see him post again, you can steal my code! running off to a meeting, now
 
Duga
Duga
 
BigBen
BigBen
5:30 PM
@Cyril haha, i'd never do that :-)
 
Feeds
Feeds
5:54 PM
 
Mathieu Guindon
Mathieu Guindon
@Feeds wait until Grandma Khaleesi comes up
 
Duga
Duga
[rubberduck-vba/Rubberduck] build for commit b4ae264d on unknown branch: 19.39% of diff hit (target 60%)
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5384?src=pr&el=h1) Report
> :exclamation: No coverage uploaded for pull request base (`next@e7590af`). [Click here to learn what that means](https://docs.codecov.io/docs/error-reference#section-missing-base-commit).
> The diff coverage is `19.39%`.


```diff
@@ Coverage Diff @@
## next #5384 +/- ##
=======================================
Coverage ? 61.31%
==============
 
IvenBach
IvenBach
@Feeds Age 50 is a fine age to become a grandparent. Much better than 32...
 
Duga
Duga
 
M.Doerner
M.Doerner
@Duga @Vogel612 I chose to solve the tuple item issue a bit differently.
 
Vogel612
Vogel612
6:01 PM
I like the way you did that :)
 
M.Doerner
M.Doerner
thx
 
IvenBach
IvenBach
Woot. git branch --merged will show all merged branches. Knowing how to RTFM makes answering your own questions easier.
 
FreeMan
FreeMan
Apparently, however, telling people to RTFM is "offensive". Go figure
 
IvenBach
IvenBach
Read The Full Manual is what everyone should do.
 
this
this
$ man woman
No manual entry for woman
 
Duga
Duga
6:22 PM
[rubberduck-vba/Rubberduck] build for commit d76917c0 on unknown branch: AppVeyor build succeeded
> # [Codecov](https://codecov.io/gh/rubberduck-vba/Rubberduck/pull/5384?src=pr&el=h1) Report
> :exclamation: No coverage uploaded for pull request base (`next@e7590af`). [Click here to learn what that means](https://docs.codecov.io/docs/error-reference#section-missing-base-commit).
> The diff coverage is `35.75%`.


```diff
@@ Coverage Diff @@
## next #5384 +/- ##
=======================================
Coverage ? 61.33%
==============
 
this
this
hmm I wonder why there aren't any unit tests for any of converters.
 
M.Doerner
M.Doerner
Lazyness?
 
this
this
perhaps; I was more asking whether there is a good reason to write unit tests for converters
 
IvenBach
IvenBach
There probably should be to demonstrably prove the converter does what it claims.
youtube.com/watch?v=bNbu5ANUeAw thoughts on TypeScript taking over for VBA?
 
this
this
@IvenBach Let's see.
TypeScript is essentially a pig with lipstick.
That said, it has the potential to fare better than its predecessors.
 
IvenBach
IvenBach
6:36 PM
Lipstick makes thing attractive.
 
Cyril
Cyril
@IvenBach and alcohol fans the flames of that burning passion
 
this
this
Smooching with pigs is generally not advisable.
 
Cyril
Cyril
i mean... if it works for kermit
 
IvenBach
IvenBach
Kermit always tried to avoid Ms. Piggy.
 
this
this
Of course. He's a frog!
I mean, it's kind of twisted that they would teach kids that frogs and pigs date....
 
Cyril
Cyril
6:44 PM
 
this
this
yeah... that.
 
Cyril
Cyril
i saw a post from a guy named "MendesGuilherme" and was like, "spanish MathieuGuindon?"
 
IvenBach
IvenBach
@Cyril That's so dark and creepy. I love it.
 
this
this
the most scary thing is that they didn't stop at one kid
 
IvenBach
IvenBach
Possibly twins.
 
Cyril
Cyril
6:53 PM
@this hahaha, i hadn't even thoguht abotu that part of it
 
this
this
I guess they could be fraternal twins but they don't look it.
 
Cyril
Cyril
"...and kermit did all of this whilst having jim henson's hand up his bum."
 
this
this
BRB, going to pour some bleach in my eyes
 
Cyril
Cyril
@MathieuGuindon or anyone that is handy with the rubberduckvba.wordpress.com site, is it possible to have a list of Post names? I see the Archive folders, and I can click in them, but having more of a quick-search from the front page, or just on the Post page (like a quick go-to) would be nice
i don't know enough about wordpress to see if it has a dock you can use for all items
 
Duga
Duga
7:10 PM
> Duplicates: #5081 , #4198, and #3996

They all cover a bit different aspects but we should consolidate those 4 issues together since I believe they fundamentally have the same root cause: hotkeys aren't consistently working.
 
BigBen
BigBen
7:20 PM
@Cyril - SelPaqM is back with a new question! Though I think it's a different issue.
 
BigBen
BigBen
7:31 PM
@Cyril - wait, is it the same question?
 
Cyril
Cyril
It's the content being asked in a manner that is more objective. Before was "what can i do" without code to support it, which I believe would be just general software stuffs
 
Duga
Duga
7:53 PM
 
this
this
8:04 PM
Thinking about it some more, assuming that if we want -1 to mean black and 1 to mean white, I think what I actually need to do is make the L value be the end and the 0/1 be the other end. The parameter value then becomes a % of that range.
 
IvenBach
IvenBach
Is this a personal tool or will other users interact with it?
 
this
this
This will be used by RD's windows theme
 
M.Doerner
M.Doerner
8:26 PM
Fraction of distance to bound kind of makes sense.
 
Cyril
Cyril
8:37 PM
@this I"m a little lost on your explanation
Are you saying to do what is currently being done for most HSL, where hue is a numberline of wavelengths (0 to 299, or 400 nm to 700 nm wavelength) and saturation/light are a 0-100 numberline, representing % of (-)100 to (+)100?
 
this
this
8:49 PM
ok, IDK if you saw this image from this AM
I like that direction it takes because it handles both the color and lightness simply be adjusting the L of the HLS values.
Now suppose I have a given color of some RGB values. I don't know what it is. Can be any color, really.
I convert it to HLS. Suppose that the L comes out to 0.55.
Now, the request is to get back a color that's 10% lighter than the input.
 
SmileyFtW
SmileyFtW
If I have the Test Explorer Outcome options where Succeeded is un-selected and I run tests that are visible (Unknown, Inconclusive, or Fail) the Successful ones are still visible after the run. Is that the expected behavior?
 
this
this
what do we mean by "10% lighter"? Answer is that for a range between 0.55 to 1, the 10% lighter would calculate to 59.5.
90% lighter would be 95.5. 100% lighter would be 1.
with the "10% darker", the bounds changes; it's now 0 to 0.55, so therefore the 10% darker would map to 0.495, I think
@this Correction: I said 59.5; should be 0.595
 
Cyril
Cyril
9:08 PM
@this sounds exactly onboard with what i was thinking, and yes I missed that image earlier
the sliders are the "numberlines"
just peaked back in, but heading out for the day and hoping i have enoguh gas to get home (costco is in my backyard so i just need to make it that far); have a good weekend folks!
 
this
this
@SmileyFtW i don't think it updates after a rerun and persist the last result so yes
 
SmileyFtW
SmileyFtW
Thanks... I expected them to disappear like they do in a Run All on a first run.
Why wouldn't they?
 
this
this
I'm pretty sure few months ago we had a PR to fix that so that it replicates the VS test explorer's behavior
e.g. it keeps remembering the last test run for the tests that weren't run
only for the tests that actually get run, do the results get reset for those.
 
SmileyFtW
SmileyFtW
thanks, didn't want to report something as a bug if it is the expected behavior. I'm very new to testing.
Little or no experience in VS
 
this
this
no worries. I am pretty sure there was an issue from someone else who didn't like losing the results for tests that weren't run since they might be in a test cycle and want to fix several things at once without losing track of tests that were already run from previous runs.
I have to ask, though, does that bother you? Why?
 
SmileyFtW
SmileyFtW
10:12 PM
Maybe I stated it wrong. I have the TE grouping by Location and Succeeded disabled. I run all tests on a 1st run leaving me with only tests that did not succeed. I then revise code to make test succeed and run selected test. Instead of disappearing when it succeeds it is still in the TE even though I have Succeeded deselected.
 
this
this
Hmm but it does show it as succeeded?
 
SmileyFtW
SmileyFtW
yes...
 
this
this
hmm I'm kind of conflicted.
 
SmileyFtW
SmileyFtW
that is not what I would have expected to happen.
 
this
this
if I've selected something, and I run it, I can see why it disappearing might be alarming
esp. if I need to repeat the same run based on my selection.
if it disappear, i can't have that in my selection, can I?
 
SmileyFtW
SmileyFtW
10:17 PM
It's concerning that it is still there.
I'm not doing a good job of explaining
 
this
this
Why don't you go ahead and submit a bug report with screenshots to explain. I might be being a donkey and missing the obvious.
 
SmileyFtW
SmileyFtW
I make code changes to a test that is not successful to make it succeed. I have Succeeded deselected. I run the test. It goes green. I would have expected it to succeed and no longet be in the TE
 
this
this
But the key question is - is that test still selected in the TE at the time you run it 2nd time?
 
SmileyFtW
SmileyFtW
Sounds like a plan.. It;s almost cocktail time anyway.
hmmm yes...
 
this
this
then how will functions that depend on selections work if it goes away?
 
SmileyFtW
SmileyFtW
10:21 PM
I would have expected the selection to unselect anything in the pane.
I wonder if I had selected an Inconclusive test and then run only failed tests if the behavior is the same
 
this
this
yeah but then those who want to use features like Repeat Last Run or Run Selected Test(s) would be annoyed that selections keep changing
 
SmileyFtW
SmileyFtW
I'll tinker and post an issue.
I guess that if the selections all succeeded then there wouldn't be anything selected. If not all succeeded, then I would expect the ones that did not succeed to be selected and the successful ones be no longer selected or shown in the TE.
@this That's why I asked first.. <G>
I'm just happy to be doing testing in VBA...
 
this
this
still you can open an issue and prompt some discussion
AS I said I'm on the fence and can see merits for and against it
 
SmileyFtW
SmileyFtW
will do. Thanks the hands on the clock are at adult beverage time. Back later...
 
IvenBach
IvenBach
11:04 PM
For importing modules has anyone experienced odd behavior? Sometimes it doesn't import everything I select. Trying to figure it out for an MVCE to open an issue.
Ducky's mad at me for something. Unit tests are 3 seconds each. Restarting Excel mumble mumble restart computer...
 
Mathieu Guindon
Mathieu Guindon
@IvenBach there's an issue for that, IIRC it has to do with the selected grouping
ttqw
 
IvenBach
IvenBach
Yep. Group by outcome is slow. Group by location is A-ok.
Wish past-Iven would have already tackled persisting the grouping preference. I'll get to it eventually.
 
IvenBach
IvenBach
11:42 PM
@Vogel612 You mind rubberduck checking my comprehension? git branch --merged only checks to see that the commit ID for a branch is included in the log of the currently checked out branch?
 
Vogel612
Vogel612
yeap
the interesting question is: why?
 
IvenBach
IvenBach
To allow you to clean out feature branches that have already been integrated.
 
Vogel612
Vogel612
no. I mean why that limitation is the way it is
 
IvenBach
IvenBach
That I don't actually know. It'd be too difficult to compare each file contents in a repo with all previous versions is my guess.
 
Vogel612
Vogel612
file contents actually have nothing to do with it.
the more interesting question is: how do you determine where to start looking?
 
IvenBach
IvenBach
11:45 PM
Start from head and go traverse all the commits in the history.
 
Vogel612
Vogel612
exactly
this directly implies you can do that for any commit, though
 
IvenBach
IvenBach
What-if-time: You have commits A-B-C-D-E-F-G (Head).
You can check if commit D is in the history of G. That I understand.
If you have C checked out as a HEAD and you check the history A and B are in that history.
 
Vogel612
Vogel612
all true so far, yes
 
IvenBach
IvenBach
Thought through my own question.
If I check for D in the history of HEAD (currently C) it won't be found.
 
Vogel612
Vogel612
yea, because future events aren't history, basically :)
 
IvenBach
IvenBach
11:48 PM
That's because even though D happens-to-be part of the history in the future
I'm slow at getting into words what my brain figured out.
TYVM guru senpai. I'm still working on my comprehension.
 

« first day (2086 days earlier)      last day (1094 days later) »