As an Arizonian, with lots of motorcyclists around, if a swarm like that were running me around, and one break checked me from six feet while I was trying to decelerate... then I got swarmed... I'd run.
Then later on they chased him down into the city, and in a traffic jam, one guy took his helmet off and started beating the side window in
They dragged the guy out, who was in with his wife and kid, and beat him.
I know the internet makes us all tough guys - but having seen some shit and been in some shit... if I was that driver, I can say I would have had to shot the guy in the head as he tried to break in the car.
@Wesley Not sure what you're looking for, dude. Like I said, I've seen a lot of stupid things. Lost quite a few friends to stupid drivers over the years too.
@Magellan Oh just that specific story annoyed me. Guys playing all Fast and Furious on the highway, then get butthurt when someone breaks their legs for pretending life is a Vin Diesel movie.
@Wesley Dunno. I pretty much ignore most major news stories about motorcycles. The newsies generally assume that all motorcyclists are goofing around and at fault. Friend of mine got the crap beat out of him by a bunch of cops simply for cruising up the HOV lane locally. News chopper was filming on a slow news day, so they decided to cook up some news and made him out to be a high-speed scofflaw racer instead of a 35mph HOV lane commuter.
Considering they they'll beat the crap out of you here for simply looking at them while they're rousting out homeless from park benches, nothing much surprises me.
@Magellan Oddly, the stories apparently sided with the motorcyclists as it made its way around the webs. But thennnn all the helmet cams started getting uploaded to YouTube because everyone wants to show how much of an icy hawt stunter they are. Suddenly the full story became clear and the tide of internet opinion changed.
@Magellan Are they still doing that? Nice.
I know the Portland PD was notorious for random acts of citizen beatings.
@Wesley All squids give motorcyclists a bad name. As a biker, I'd have done the same as the SUV driver - those guys are just assholes who happen to be on bikes.
@Iain I'm not going to bother tracking such things down. If someone can't even be bothered to explain what the matter is in complete sentences that they type out, I see no reason to help them.
I Am Using Debian Linux 64Bit 4Gb Ram 2 Cpu Vps Server.
I Am Executing 50 PHP Files Using 50 nohup Commands and Saving Their Logs.
I Watched That All The Given Jobs Not Fully Completing. Its Stopped At 30% Sometimes 50% Sometimes at 90%.
Previously I Thought Its Happening Due To Less Ram. Then I ...
Bit more time on the BF4 beta last night. It's going okay, although just one map means things get stale quickly and after a few rounds I go back to Rush on BF3.
The Levolution of the skyscraper is pretty cool. Stood on the top of the building and you hear boomrumble - alarms start going off and then it tilts a bit giving you time to jump off.
Oh yeah, saw something this morning which made me smile
I was sat at traffic lights this morning when a a motorbike pulled up alongside. I look over and notice that the pillion is wearing TINY boots and I realise it's a girl of no more than 12. She takes the opportunity to cuddle the rider, which I thought was cute as, but then the rider turns and flips up their helmet and I realise it's her mum.
Dunno why, but I just thought it was the coolest, sweetest thing ever. They both looked so happy, too - like there was nothing else going on in the world. I'm guessing it was a treat or something
anyone good with SELinux who can say why the boolean allow_ypbind also allows httpd_t smtp_port_t:tcp_socket name_connect or why the httpd_read_user_content boolean also allows httpd_t var_lib_t:file unlink;
Scope of the question
This question is solely about getting a client requesting a domain: example.com to one of the two available servers. How it is handled from there on, is another problem to solve and should therefore not be mentioned in an answer.
Available tools
My available tools are two...
I have a SBS 2011 in office running a domain, and I want to add additional server that would only be used as a serve to run and serve accounting software (OS SBS2003)
Now I have encountered a problem that two servers cannot coexist on a same domain. So I would like to find a way how to make this...
@ewwhite You were having big problems with a storage vendor. I seem to remember it being something like per GB licensing. Am I remembering right and was that NetApp or someone else?
I installed a RF modem in Windows XP machine and it works fine. But when I use the same RF modem card in Windows 7 machine, it failed to detect.
I could not see any Resource allocated for the RF modem in Windows 7 "System Information->Hardware Resources->I/O"
Can anyone help me? What would be ...
If you know that you cannot have more than one SBS server per network, why are you asking how you can have more than one SBS server per network? In this case, the answer is clearly "You don't. Buy a full version of Windows Server." — MDMarra30 secs ago
Having two LAN, each one have its own gateway, DHCP and internet connexion
LAN 1 - IPs: 192.168.0.0-255, Mask: 255.255.254.0, Gateway: 192.168.0.1
LAN 2 - IPs: 192.168.1.1-255, Mask: 255.255.254.0, Gateway: 192.168.1.1
I want to connect them with a linux computer having two NIC, one for each ...
@Iain on CentOS6 running sesearch -b httpd_read_user_content -AC I don't see httpd_t var_lib_t:file unlink being allowed. Also sesearch -b allow_ypbind -AC | grep smtp shows some rules regarding postfix, which would make sense if the mail server where to be configured with that type of auth.
Because each LAN have their own DHCP. And users want to keep their internet connection. If I connect two networks directly together there will be some DHCP fight. Do you think it is possible to block DHCP trafic using cisco SF300-8 ? — bokan2 mins ago
This question sucks, but the OP finally got me to write some simple find-last-or-first-day-of-month-using-a-file's-modified-date, so I have to upvote them as the question "it is useful"
SELinux isn't really my thing - I kind of get by but I want to be better ... but this may be an issue with audit2allow though. If I run a file containing mixed denied messages though audit2allow it tells me
`#============= httpd_t ==============`
`#!!!! This avc can be allowed using one of the these booleans:` `# httpd_read_user_content, httpd_enable_homedirs` `allow httpd_t user_home_t:file read;` `allow httpd_t var_lib_t:file unlink;`
If I isolate the messages then the read errors produces
`#============= httpd_t ==============`
`#!!!! This avc can be allowed using one of the these booleans:` `# httpd_read_user_content, httpd_enable_homedirs` `allow httpd_t user_home_t:file read;`
@Iain The "This avc can be allowed using one of the these booleans" line refers exclusively to the next line, if several booleans where necessary, you'd get one advice per line. As per the output , you only need to setsebool -P httpd_enable_homedirs=on
Hey @jscott - can you look over this real quick before I post this as an answer? I don't have an Exchange 2010 server to test it on and don't want to give the guy false info since I'm not the best PS guy (even though it's a simple script).
Basically the guy wants to disable Exchange 2010's automapping. http://serverfault.com/questions/543559/script-to-remove-exchange-2010-automapping-for-all-mailboxes
Here's my PS loop. Does it look right to you? It should get all mailboxes, then loop through each looking for users that have full access perms, then remove those perms, then add them bac…
@MathiasR.Jessen I'll remove my answer...but you need to add the . after both properties in you where clause (as @jscott pointed out to me as well...Technet forgot them)
@MDMarra I'm beginning to wonder if this is some dorm jerk who wants to set up a box to intercept all traffic, and that this is a great way of doing it
If you said "ARP" to him he'd probably say "Bless you."
Just ignore the question, doesn't deserve any more attention
Assuming he's got a simple /24 on both ends connected to basic L2 switches that then go into each "router" and he's griping that cross router traffic is too slow.
The answer is to stick with a /24 and (if he really wants it to be a linux box), stick another layer (in this case the linux box) in between his L2 switches and the routers. Plug the switches into the Linux box and create the linux box as a layer 3 switch. That'll be the gateway for each subnet. Then create multiple default routes for each VLAN that run to their respective routers upstream. He'd need to reconfigure the router…
and I posted it as a comment...since I spent the effort to actually think through that monstrosity
You can't schedule a newly generated key to be used 11 hours ago, for the simple reason that the moment already passed - you're 11 hours late.
If you meant to specify a moment 11 hours into the future, remove the -:
Add-KDSRootKey -EffectiveTime ((Get-Date).AddHours(11))
We had some annoyances with a user connecting through OWA. This user used to be a server admin.
Upon checking today, all IIS logs have been removed up to and including sept 30 (the day the annoyances were diagnosed). We do have a back-up and of course all the passwords on the servers and account...
Mystery for you guys ...trying to connect to an 2008R2 SQL server using SSMS. Times out. Using IP only (default instance). Firewall disabled on the server and TCP/IP enabled. Local SSMS connects fine. Am I missing something? O.o
Good...that's the only difference I can really see. I have another server that works fine and is configured the exact same way. I've tried IP and the hostname
neither seem to work. If I specify the instance (MSSQLSERVER) it says the connection string is invalid
I am trying to reset a user's password on an Exchange 2010 server. There should be a "Reset Password" button under the "Account" tab in the user's properties, but there's nothing there. It only gives me the option to force the user to change their password at next login.
I've made sure my admin...
I am helping a friend set up a network for his new business and am having issues setting up the router. I am by no means a network expert.
He has a Cisco 2921 router and I have it set up as follows:
GigabitEthernet0/0 10.10.10.1, DHCP used for setup interface (web and ssh) at the moment.
Gigab...
I think I'm going to post over on WebMD..."I am helping a friend do surgery for his new medical practice and am having issues with patients dying. I am by no means a surgery expert. Just trying to help a buddy out with his new biz bro!"
Hmm...it works now. It appears windows firewall being "off" doesn't mean it was all the way off. I went into the advanced settings and it was still on for the "Private" network. Flipped it off and it connected.
Weird...considering I have a rule to allow connections on the port and it wasn't working anyway.
Your screenshot showed that this server runs every possible SQL server role.. Just watch out when you deploy SQL servers and not select every single feature :)
I just saw this in a job posting and thought, 'that escalated quickly:'
> "Generally works in normal office environment, but may be required to travel domestically and internationally on short notice, to austere environments, under harsh living conditions, for periods of time not longer than 179 days"
"Some positions will be assigned to overseas locations where living and working conditions at assignment location could be remote and uncomfortable, with long hours, exposure to weather, dust, and hazardous/harsh conditions"
Here's your clear cut answer: http://support.microsoft.com/kb/325590
I hope it was clear cut enough for you. You know, since we all sit here and get paid for giving impatient, demanding people clear cut answers.
@RyanRies oil companies or army contractor is my guess
Scope of the question
This question is solely about getting a client requesting a domain: example.com to one of the two available servers. How it is handled from there on, is another problem to solve and should therefore not be mentioned in an answer.
Available tools
My available tools are two...
I installed a RF modem in Windows XP machine and it works fine. But when I use the same RF modem card in Windows 7 machine, it failed to detect.
I could not see any Resource allocated for the RF modem in Windows 7 "System Information->Hardware Resources->I/O"
Can anyone help me? What would be ...
Having two LAN, each one have its own gateway, DHCP and internet connexion
LAN 1 - IPs: 192.168.0.0-255, Mask: 255.255.254.0, Gateway: 192.168.0.1
LAN 2 - IPs: 192.168.1.1-255, Mask: 255.255.254.0, Gateway: 192.168.1.1
I want to connect them with a linux computer having two NIC, one for each ...
You can't schedule a newly generated key to be used 11 hours ago, for the simple reason that the moment already passed - you're 11 hours late.
If you meant to specify a moment 11 hours into the future, remove the -:
Add-KDSRootKey -EffectiveTime ((Get-Date).AddHours(11))
I am trying to reset a user's password on an Exchange 2010 server. There should be a "Reset Password" button under the "Account" tab in the user's properties, but there's nothing there. It only gives me the option to force the user to change their password at next login.
I've made sure my admin...
I am helping a friend set up a network for his new business and am having issues setting up the router. I am by no means a network expert.
He has a Cisco 2921 router and I have it set up as follows:
GigabitEthernet0/0 10.10.10.1, DHCP used for setup interface (web and ssh) at the moment.
Gigab...
Here's your clear cut answer: http://support.microsoft.com/kb/325590
I hope it was clear cut enough for you. You know, since we all sit here and get paid for giving impatient, demanding people clear cut answers.
