« first day (1480 days earlier)      last day (2323 days later) » 

9:00 PM
hold up, you're a good magician?
 
Then you shouldn't have said anything
 
I thought you were more of the 'evil' bit, like that melty lady in the wiz of oz
 
@Riker not really
fine fine
it was in the original NG too but I don't think anyone knew how to use it
!!/pull
 
@quartata CI build is still pending, wait until the build has finished and then pull again.
 
tsk
ooh pytest has some new fancy percentage thingy
 
9:03 PM
CI on 156739a succeeded.
 
@quartata - I get this:
> Command /usr/bin/python3 -c "import setuptools, tokenize;__file__='/tmp/pip_build_ubuntu/pyyaml/setup.py';exec(compile(getattr(tok‌​enize, 'open', open)(file).read().replace('\r\n', '\n'), file, 'exec'))" install --record /tmp/pip-b2l5xhli-record/install-record.txt --single-version-externally-managed --compile failed with error code 1 in /tmp/pip_build_ubuntu/pyyaml
:/
When I try and run that command
 
@Henders hmm
!!/pull
 
[ SmokeDetector ] SmokeDetector started at rev 156739a (quartata: Wrong variable) (running on angussidney/EC2)
 
@Henders do you have GCC?
 
Not sure
 
9:04 PM
Restart: API quota is 18194.
 
How would one check?
 
Assuming it's running on Ubuntu, the wheels should already be compiled, right?
 
@Henders just type "gcc" into your terminal?
 
wait nevermind it doesn't have wheels anyways
@Henders wait a second
try it with just pip?
 
@Riker gcc: fatal error: no input files
 
9:05 PM
then you do :p
 
@Henders looks like you have it then
 
[ SmokeDetector | MS ] Manually reported question: Primitive Roots of Unity by quartata on codegolf.SE (@Mego @quartata)
 
ok cool that's fine
@angussidney destroy the MS record?
 
\o/
 
9:05 PM
@SmokeDetector f
 
> The program 'pip' is currently not installed. You can install it by typing:
 
!!/threads
 
140297123817216: MainThread
140297020532480: message_sender
140296448898816: Thread-6
140296994567936: Thread-1
140296750872320: message sender
140297003222784: message_sender
140296432113408: Thread-9
140296767657728: Thread-4
140296776050432: Thread-3
140296423720704: Thread-11
140296784443136: Thread-2
140296440506112: metasmoke websocket
140296406673152: bodyfetcher post enqueing
140296742479616: auto restart thread
140297011877632: message_sender
140296415065856: bodyfetcher post enqueing
140296759265024: pickle ---rick--- runner
 
@SmokeDetector f
 
I don't see the delayed post but it might have already stopped because of the f
 
9:06 PM
fp- by Videonauth
 
it didn't post to the Tavern though so I think it works
@Henders weird
how do you normally install the dependencies?
I guess maybe you could do python -m pip install pyyaml just to make sure
 
[ SmokeDetector | MS ] Bad keyword in title: Anyone know a good institute to take SAP course in India, please? by P.Alwosabi on stackoverflow.com (@JakeSymons)
 
@SmokeDetector false
 
@quartata Registered question as false positive.
 
@SmokeDetector f
 
9:09 PM
fp- by Riker
 
Sorry, it's working now. That was my fault..
 
ok cool
 
It's pulled and ready now :)
 
haven't seen any restarts yet so I think we're all set?
 
@quartata cc@art or @undo since I can't do it
 
9:10 PM
provided it's not like dropping reports and I don't know about it
@angussidney should be able to? you're an MS admin?
 
It's MS developer only
Though I think we should probably change it, there's been a couple of times that we've wanted to do it in the past
 
hm, @quartata isn't listed as RO on the charcoal site
 
@quartata in progress, thanks!
 
the pinned one
 
@Riker because I've been an RO for a grand total of 30 minutes
 
9:16 PM
ah
 
@quartata you know your !!/blame invisible characters are visible on my machine?
 
!!/blameá Ž
 
@Mithrandir I hit an error while trying to run that command; run !!/errorlogs for details.
 
@NobodyNada Yes, the mongolian vowel separator (which is the digit 0) isn't invisible on all devices
 
9:17 PM
The rest are though
yeah that's the one you can see
The others are pretty consistently invisible
I left that in just so that it wasn't a total mystery to some people... :P
 
Ah, makes sense :p
 
say @angussidney are you logged into your EC2?
!!/errorlogs
sd poof-force
 
what's force mean?
 
!!/tea
 
@Mithrandir brews a cup of darjeeling tea for @Mithrandir
 
9:21 PM
!!/tea Mithrandir
 
@quartata brews a cup of earl grey tea for @Mithrandir
 
@SmokeDetector delete
 
@quartata nah sorry, I'm on mobile
 
@Mithrandir Messages from SmokeDetector in Charcoal HQ are generally kept as records. If you really need to delete a message, please use sd delete-force. See this note on message deletion for more details.
 
@angussidney ok, that's fine
 
9:22 PM
@SmokeDetector @Riker
 
@Riker if someone makes a PR I'll merge
 
since reports are logged to the console I was wondering if you could watch it for a bit and make sure they were all making it to chat
 
@Mithrandir ah ok
 
!!/blame
 
@WELZ It's Cai's fault.
[ SmokeDetector | MS ] Offensive answer detected: How many Dragons are there in total in Fairy Tail? by Bob on anime.SE
tpu- by Glorfindel
 
9:34 PM
@quartata you can always check MS
 
Metasmoke post 96493 (Primitive Roots of Unity) destroyed by Undo
 
@quartata Done:
root@smokedetector1:~ # zypper in python3-PyYAML
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following NEW package is going to be installed:
  python3-PyYAML

1 new package to install.
Overall download size: 154.0 KiB. Already cached: 0 B. After the operation, additional 604.9 KiB
will be used.
Continue? [y/n/...? shows all options] (y):
Retrieving package python3-PyYAML-3.11-9.4.x86_64              (1/1), 154.0 KiB (604.9 KiB unpacked)
Retrieving: python3-PyYAML-3.11-9.4.x86_64.rpm ...............................................[done]
 
@angussidney ooh, good point
@bwDraco SuSE?
 
@quartata Yup. openSUSE Leap 42.3, to be exact.
 
[ SmokeDetector | MS ] Manually reported answer: What jobs or professions involve writing? by Sandeep Khari on writers.SE
tpu- by Glorfindel
 
Ah crap
 
!!/watch quickbookspayrollsupport\.com
 
I forgot to start the thread
 
@Glorfindel I hit an error while trying to run that command; run !!/errorlogs for details.
 
9:41 PM
!!/errorlogs
 
File "/home/ubuntu/charcoal/SmokeDetector/ChatExchange/chatexchange/browser.py", line 133, in post_fkeyed
return self.post(url, data, headers)

File "/home/ubuntu/charcoal/SmokeDetector/ChatExchange/chatexchange/browser.py", line 113, in post
return self._request('post', url, data, headers, with_chat_root)

File "/home/ubuntu/charcoal/SmokeDetector/ChatExchange/chatexchange/browser.py", line 102, in _request
response.raise_for_status()

File "/home/ubuntu/charcoal/SmokeDetector/env/lib/python3.5/site-packages/requests/models.py", line 929, in raise_for_status
 
no no no no
the hell
The editor doesn't work on mobile
 
The user has nontrivial network activity: stackexchange.com/users/9079262/sandeep-khari?tab=activity including some upvoted posts. But that one was definitely spam. Hm.
 
@Glorfindel can you make a PR for me?
I'll merge it
 
@CrazyIvan Could have left himself logged in somewhere ...
 
9:43 PM
Sure, but it can also wait until tomorrow.
 
OK I need you to make two super simple edits:
 
@DavidPostill His other posts are also about quickbooks, but with more legitimate looking links.
 
Probably a quickbooks employee who doesn't know the rules about self-promotion.
So it might not be necessary to watch that at all (cc @quartata)
 
@Glorfindel Tack on a .start() to line 260 of chatcommunicate.py
 
@quartata contrary to popular opinion, I know next to nothing about Python and Ruby. One might even wonder what I'm doing here.
 
9:46 PM
[ SmokeDetector | MS ] Potentially bad keyword in body: How to make an array of users skip a line after each user by NickDim on stackoverflow.com (@JakeSymons)
 
Dont worry you don't have to know what it's doing
 
fp- by Glorfindel
 
@quartata I can do that if you like
 
@NobodyNada ok thanks
That's the first one
 
Do I make the PR to the main Smokey repo or somewhere else?
@quartata Great, what's the other one? I can put them in the same PR
 
9:50 PM
The second is to change set to GlobalVars.code_privileged_users on L318, 320 and 322 of metasmoke.py
This goes to the main one
Thank you so much
 
Done: #1343
 
Anonymous
10:06 PM
@quartata Did you figure out what was causing the 500? Just curious.
 
Lack of fkey, I heard
 
Mine has a tendency to run away, too.
 
[ charcoal-se.github.io ] continuous-integration/travis-ci/push success on 244ee83: The Travis CI build passed
 
@SmokeDetector words
 
10:22 PM
[ SmokeDetector | MS ] Potentially bad keyword in body: Can I Get My Car Key Fixed? by Bob Locks on mechanics.SE
 
[ SmokeDetector | MS ] Manually reported question: ★NEW LAUNCH FROM STELLAR LUMENS★ by Stellar Lumens on meta.SE (@JakeSymons)
 
@SmokeDetector tpu-
@SmokeDetector tpu-
 
[ SmokeDetector | MS ] Bad keyword in answer, bad keyword with email in answer, email in answer, pattern-matching email in answer: What are the downsides to multi-classing? by wilson care on rpg.SE
tpu- by J F
 
J F
@SmokeDetector It’s pretty cool that FIRE adds the 🔥 button to these.
 
10:36 PM
@JF yay regex
 
[ SmokeDetector | MS ] Manually reported answer: What's cold and hard and doesn't bend? by user43108 on puzzling.SE (@Mithrandir)
 
J F
!!/blame2
 
10:50 PM
@JF I hit an error while trying to run that command; run !!/errorlogs for details.
[ SmokeDetector | MS ] Blacklisted user: What's cold and hard and doesn't bend? by user43108 on puzzling.SE (@Mithrandir)
 
@JF it doesn't work like that ;)
 
J F
:(
 
!!/errorlogs 50
 
File "/home/ubuntu/charcoal/SmokeDetector/env/lib/python3.5/site-packages/requests/models.py", line 929, in raise_for_status
raise HTTPError(http_error_msg, response=self)


AttributeError: 'tuple' object has no attribute 'room'
2017-12-06 20:52:23.018768 UTC
File "/home/ubuntu/charcoal/SmokeDetector/spamhandling.py", line 151, in handle_spam
without_roles, notify_site=post.post_site, report_data=(post_url, poster_url))

File "/home/ubuntu/charcoal/SmokeDetector/chatcommunicate.py", line 242, in tell_rooms
 
!!/whois code_admin
 
10:53 PM
@ArtOfCode I am aware of 23 code admins. Currently in this room: ArtOfCode, angussidney, Mithrandir, DavidPostill, NobodyNada, Henders, Magisch, bwDraco, doppelgreener, Andy, Paul Stenne. Not currently in this room: Ferrybig, Thomas Ward, Byte Commander, Suraj Rao, tripleee, Glorfindel, John Dvorak, Yvette Colomb, ProgramFOX, Ashish Ahuja, Undo, quartata.
 
!!/amiprivileged
 
@ArtOfCode ✓ You are a privileged user.
[ SmokeDetector | MS ] Offensive answer detected: Can I access the in-game console in Fallout 4 on PS4? by user201256 on gaming.SE
tpu- by J F
 
@SmokeDetector k
 
@NobodyNada small oversight: the merge PR button doesn't work on mobile
@ArtOfCode can you merge it?
 
it does work on mobile, if all status checks pass
just !!/approve it and it should work
 
10:56 PM
It didn't do anything
Even though I'm a collaborator
 
are you part of the PA group?
yes
huh
which one?
oh that one
 
1343
 
mergeroo'd
 
OK cool
Those were hot fixes I couldn't do on mobile
I got Nobody to do them
 
CI on 6d504a4 succeeded.
 
11:01 PM
!!/pull
OK now we should be all good
 
[ SmokeDetector ] SmokeDetector started at rev 6d504a4 (ArtOfCode: Merge pull request #1343 from NobodyNada/master) (running on angussidney/EC2)
Restart: API quota is 17136.
 
@JeremyBanks Nope. It's not the fkey
Seems to be random. Retrying works
CE only catches the error if it's a 409
!!/watch quickbookspayrollsupport\.com
 
@quartata Added quickbookspayrollsupport\.com to watchlist
 
phew
!!/tea
 
@quartata brews a cup of passionfruit tea for @quartata
 
11:05 PM
<3
 
CI on d59572d succeeded. Message contains 'autopull', pulling...
Restart: API quota is 17097.
 
@Catija @Videonauth dunno if anyone got back to you or not (read: didn't scroll back to check), but you've both been added since you asked :)
 
@ArtOfCode Yes! I got pinged with a bunch of people this morning!
 
Oh @ArtOfCode you might want to re-educate the troops on how to grant privileges and add new rooms
 
@quartata Given that I don't know how to... that might be your next job :)
 
11:09 PM
oh OK heh
So if you want it to be temporary you can actually do this:
 
[ SmokeDetector | MS ] Manually reported answer: Swift 3 - Headers In A Table View by AndreBump on stackoverflow.com (@JakeSymons)
 
could probably work it out, but it's better coming from someone who knows
 
!!/invite 30332 site-askubuntu.com
 
@quartata I'll now send messages with types site-askubuntu.com to room 30332 on stackexchange.com. (Note that this will not persist after restarts.)
Restart: API quota is 17079.
 
Why restart bro
!!/errorlogs 150
 
11:11 PM
requests.exceptions.HTTPError: 500 Server Error: Internal Server Error for url: https://chat.stackexchange.com/chats/11540/messages/new
2017-12-06 18:34:33.186965 UTC
File "/home/ubuntu/charcoal/SmokeDetector/excepthook.py", line 54, in run_with_except_hook
run_old(*args, **kw)

File "/usr/lib/python3.5/threading.py", line 862, in run
self._target(*self._args, **self._kwargs)

File "/home/ubuntu/charcoal/SmokeDetector/chatcommunicate.py", line 142, in send_messages
room.room._client._do_action_despite_throttling(("send", room.room.id, msg))
 
@quartata cuz ya done screwed up
 
and then rooms and privs both are in rooms.yml, right?
 
@ArtOfCode yep for permanent changes
 
okay that ain't too difficult then
 
@Riker actually that was something unrelated
 
11:12 PM
there's probably documentation somewhere that needs updating
 
[ SmokeDetector | MS ] Manually reported answer: Swift 3 - Headers In A Table View by AndreBump on stackoverflow.com (@JakeSymons)
Restart: API quota is 17065.
naa- by DavidPostill
 
@quartata is there a temporary privileges command?
 
When I posted that ^ ^ manually, got no response in SOCVR from Smokey. Is that normal?
 
prooobably not
@quartata ^
I'm getting the feeling you're going to start getting pinged a lot
 
Rob
@Mogsdad Might have something do with the 'duplicate reports' smokey occasionally has? metasmoke.erwaysoftware.com/posts/by-url?url=//…
Oh nope, those are both yours
 
11:31 PM
Restart: API quota is 16913.
 

« first day (1480 days earlier)      last day (2323 days later) »