@PlasmaHH Do you need a fake ID, because you've got a bad reputation in the embedded systems circles?

hey guys, I have a battery that is going to take a very small current draw, say 20 mA max, so I'm not too concerned about its thermal environment and I wanted to actually embed it in some silicone.

If the battery were to be defective though, what could I expect to happen, would it cause an explosion in the silicone or since I've cut it off from an oxygen source I should be safe. Should I design a weakspot in the silicone to funnel a possible explosion there.

This REALLY shouldn't be a problem but I just want to consider everything that can go wrong.

@NickAlexeev no, because i have been put on the nofly list in 1995