Im making a system where whenever i press a footpedal it captures a frame for me to put in image. Makes capturing easy and i can design the action better.
So far its been 30€ For the electronic prototyping and thats done (its my day off so had to do a project) And tomorrow i will get the spring and reserve the 3d printer for a mockup.
I have a pretty basic HTML page. The code looks like the following:
<body>
<header style="min-height: 255px;">
</header>
<article style="padding-bottom: 60px; width: 900px; margin: 0 auto;">
Body text goes here.
</article>
<footer style="position: absolute; bottom: 0px; width: 10...
@JohnB hmm I struggle most of the time when I try to implement other people's code. One thing always requires other libraries and those require their own things and I end up breaking stuff. But reading to see, thanks
i would mill it in the 5 axis milling machine out of aluminium but the milling machine is reserved for the month
@JohnB theni print again. One of the perks at working in a mechanical engineering university si that building stuff is cheap. Printing is free of charge
@Darth_Vader Fury was okay. It's pretty straight-forward and kind of predictable. It's along the same likes as A Bridge Too Far -- insurmountable forces against a small troop. It wasn't bad, but It's no "dirty Dozen" either.
and yeah.. Chappie was.. mediocre at best -- (Short Circuit + District 9).
yeah and the "mommy" and "daddy" characters may have been bad asses in South Africa.. but they were just commical to me... like Don Knots trying to play Lucky Luciano.
@EnthusiasticStudent if you are using SASS.. download that one. If you are using LESS then download the source code. If you are using neither, then just download the "bootstrap"
@Scott thanks... however, I am not a professional in html... I started designing my own website with basic codes of html5 in the last two days... I don't like the result, it is not professional at all. But I like programming and working with html... it is new for me. It makes my free time.